HOW TO: Rear Brake Pad Replacement | 2018+ Goldwing 

You are one of the best for showing maintenance on these bikes. I appreciate there is nothing to buy. I refuse to buy any video package

Excellent video with clear instructions. I will bookmark this and come back when it’s time to change my brakes.

Thank you for sharing Mengy. This video is exactly what I needed in order to clearly understand how to remove my rear wheel to do a tire change. You rock! Keep up the great work.

Thanks for this vid. Needed to clean my rear brakes in an effort to eliminate some brake squeal and this helped a lot.

My buddy and I just changed the rear pad’s Friday, along with the tires, oil and new centranic balancers. Oh ya new luggage rack. Big day of maintenance. Rest for our two week trip. Keep the good videos coming

Funny... from 0 minutes to 1:28 your license plate was clearly visible and THEN you decided to cover it up. I still don't understand why folks cover up they're plate. Was nice seeing a video on pad replacement.

Nice job, very enjoyable to watch (without me laying on the ground) 👍 👍

I had the same noise when I used EBC sintered pads on my Victory.

When you change your brake pads why don’t you clean the calipers? Take an old tooth brush an dip it in dot 4 brake fluid and brush around the outer surface of the pistons to remove dirt that builds up over time. A light film of grease on those pins is probably a good idea.

when there was nothing to do, specialists like you started doing what was not necessary

Thanks for sharing.

Nice job Mengy. Totally agree with star pattern tighten and use of proper torque. Those previous pads look pretty good. You decided right by your standard and that’s ok too. Did you give a little wipe down cleaning while you’re under there? Wheel, exhaust, etc.

Thanks ✌️

Mengy, you made the rear brake pad replacement look easy, thanks for the video. What kind of bike lift do you have for taking the rear tire off? Scott

You have another five grand on those pads at minimum. As EZ as the rear brake job and would just reinstall older pads and save you some Adult beverage money or what ever else you want to spend the savings on. JMHO Nice Job.

Thanks Mengy. Did Honda recommend new bolt as well? And I wanted to ask you if you put bike in neutral before turning off? I never have but recently saw it in the manual.

Guess what you didn't have to take the tire off. But still a good video

I would like to recommend a nice guy few things for next time. The way you installed the wheel, you are killing your back!!! DCT? park brake on when one stud on the wheel is at 12 o'clock. Sit in the back, each leg goes under the bike, wheel is inside ready to put up, the wheel has to go on an angel. left hand grabs the center wheel, right hand guides the wheel on the top stud only, once up, drop the wheel down and she is in on like butter. Second, strongly recommend to take the caliper off, clean it good with WD-40 Degreaser, BEFORE you remove the pads. Remove the pads and clean the rest with dish soap/water in a spray bottle and fresh water rinse, after. Clean the pin good, and a drop of marine grease/brake caliper grease on the tiny o-ring and you are good.

I have changed my rear pads without removing the back tire…

Before making videos you should know what you’re doing.No need to remove rear tire I just did mine in 15 minutes.