Worked perfectly. Bought a $10.99 refill kit , came with (2) black ink bottles and (1) each of red, yellow, and blue ink bottles. I have a Canon TS-202 and I refilled exactly as you showed and WaLa it worked! I printed a B/W test sheet and a Color test sheet. Both came out perfect. Thank you, you saved me so much money because each cartridge is $16.00 each.
Simple and to the point! I would have never dare to stab the top without knowing! Side note for people doing the black. I just peel off the bottom label without removing it to make it easier. Also beware when removing the needle from the syringe it will splash ink around!
In case you guys are wondering, “Note: if the printer remind “ink low” , just ignore the message and continue to print. If the printer stops printing, then press the “Recovery Button” or “Stop Button” for about 5-8 seconds. After that the printer will work again.” That’s what it says on the instruction/directions paper that mine came with. Hope that helps. I see lots of people asking that same question. Good luck!
the magenta goes in the top and on the left side is the cyan and the right is the yellow. so the M on top and C & Y from left to right. hope that helps.
rewatch video. he doesn't mention the first color. but he does mention the other colors; or clean a syringe. Insert in previously drilled opening. You should see some color on syringe.
Are people refilling canon 243 ink cartridges that were used on other printers such that the current printer does not recognize the new "refilled" cartridge? I am noticing that there is a brisk business in selling empty ink cartridges and I am thinking this is the only way I can refill and use a canon ink cartridge.
i got one from the place i ordered the refill ink however, I have an electric hand drill and i just use the attatchment that offers the ability to drill a hole. That's easier if you don't have the strength to drill a manual hole. Hope that helps!
OK so why when I print out any other picture besides the print quality test it comes out weird looking pixelated textured it doesn’t come out smooth and fully pigmented
May be ink is clogged inside the cartridge and if it improves then good if not you may have to buy an ink cartridge. But give a try for ink cartridge alignment and clean print heds to improve the results.
with a new cartridge how much ink are you able to use before you start refilling, last one went to low and lasted a few refills then showed empty... Thanks
