GREAT TECHNICAL A&H
🔔 Don't forget Turn on the bell 🔔 to Receive notification when I upload New video
Don't forget to subscribe
/ @greattechnical_ah
00:50 Open the cartridge printhead cover
02:37 Remove the sponges from the cartridge and try not to contaminate it
03:37 Put the cartridge in a bowl and immerse it in water for at least six hours
03:57 Repeat the same steps as before for the black cartridge
05:24 Remove the cartridges from the water after washing and drying them well
06:37 Put the sponges back in place
07:57 Add inks to the cartridges
08:24 Leave the cartridges for a while so the inks can penetrate them
08:34 Put the cover back and glue it temporarily
09:37 Replace the cartridges in the printer
10:16 Test the nozzles by (the nozzle check)
For use in Canon printer Pixma MG2150, MG3150, MG4150 MX375 MX435 MX515, MP240
MP245, MP250, MP252, MP258, MP260, MP268, MP270, MP272, MP276, MP280, MP282,
MP480, MP486, MP490, MP492, MP495, MP499, MX320, MX328, MX330, MX338 IP1200
IP1300 IP1600 IP1700 IP1800 IP1900 IP2200 IP2600 MP140 MP150 MP160 MP170 MP180
MP210 MP220 MP450 MP460 MP470 MX300 MX310 and more printers
This method only works in cartridges that contain a built-in print head.
If the cartridge cannot be reset and errors persist, then there is a chance
that the copper contacts on the cartridge printhead circuit board have been damaged.
There are pins that can become worn and short against each other,
causing errors and preventing further printing.
A close inspection may be necessary to determine if this is causing the problem.
For any information or suggestion leave a comment
#How_to_Refill_Black&Colour INK Cartridge#Printer_Ink_Refilling#Refill_Canon_inkcartridge_the_easyway#
6 авг 2022
