How To Remove a Busted Bolt FAST! New Style Screw Extractors

Подписаться 493 тыс.

Просмотров 639 тыс.

50% 1

This DIY video shows you how anyone can remove a broken bolt with some easy methods with this awesome set of screw extractors. These are the BEST amzn.to/2XXo1Qq
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bdf6a6ky
We Guarantee you will love it.
***************************************
If you would like to help us out.
www.paypal.me/YourSweetProjec...
***************************************
Tools USA
Venom amzn.to/2B8kLBh
Dewalt amzn.to/2JbQnN5
High-Quality Drill Bits amzn.to/2Jc3lui
Screw Extractors we used in Video amzn.to/3b9qUBz
These 2 Below work great as well.
(Good) Screw Extractors amzn.to/2DVq3n1
(Best) Screw Extractors amzn.to/2ZT6Hba
Center Punch Set amzn.to/3uAMdTR
Ballpeen Hammer amzn.to/2DLfhzl
Needle Nose Grip Set amzn.to/2LjCyii
Cresent Wrench Set amzn.to/2LjJRqd
Spin-Off amzn.to/2VaVeoF
_____________________________________
UK Tools
Dewalt amzn.to/2Lm3zS6
Screw Extractors amzn.to/2VKtoPA
Drill Bits amzn.to/2VJUEO8
Center Punches amzn.to/2LiLtjK
Vise Grips amzn.to/2VDyq0f
Venom Gloves amzn.to/2LhIdVZ
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this RU-vid channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

Авто/Мото

Опубликовано:

1 май 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 397

@jasonkennedy2348 2 года назад

I appreciate this video!! Definitely the best one for what I had to do! Had a bolt broke off in a bolt hole for the starter that I almost didn’t catch and was only just a few days away from dropping my motor in my truck! Did exactly what was shown in your video and it came right out! Thank you again!

@SweetProjectCars 2 года назад

Great to hear! Thank you for watching and sharing your fabulous results, we truly appreciate it Jason, have a great day my friend. mad Mike the hammer SPC

@joemontero725 5 лет назад

Once again a very good video my friend. Please let me add my 2 cents. I've been drilling out broken bolts for over 40 years as an airplane mechanic. My word of advice is when you drill into steel its with low speed and high pressure. When you drill into non ferrous metals as aluminum and copper it is with a high speed and low pressure. That along with some good lubrication will save your drill bits from heating up and dulling out. Also if you drill steel with high speed what happens is you work harden the surface and will make it very difficult to get another bit to drill into the surface. Thanks again and I really like them easy outs your using.

@SweetProjectCars 5 лет назад

thanks for sharing

@officerdanko6922 5 лет назад

Left handed drill bits are a gift FROM God.a lot of broken bolts will ✈ fly out of that hole like magic man

@oldretireddude 5 лет назад

I've said before, I don't know why they even make right handed bits anymore except to remove left handed threads. I'll never buy another right handed bit set.

@scottyeakey244 3 года назад

Nicely Done, Very Professional, Thanks For Sharing...👍🏼

@danneumann3274 3 года назад

left handed bits are great if Your left handed. I prefer right handed bits

@jonathangaliano2617 7 дней назад

@@danneumann3274 🤔🤔🤔

@Leonardokite 5 лет назад

Great tip on how to get the hole centered. That's always been a huge issue....no more!!! Thanks Captn'

@kylemlm 5 лет назад

Mike you are the "Master Detailer" . This video takes it to a new level. Thank you Sir.

@SweetProjectCars 5 лет назад

Thank you Kyle we truly appreciate that my friend and I mean it

@mattholmes8214 5 лет назад

Broken studs are always an adventure. 7/10 times I end up drilling out and chasing the threads with a tap. Usually because the last guy didn't put never-seize on when they should've.

@zaiks0105 2 года назад

... or worse some idiots put lock-tite that somewhat bonded with threads

@clamojoat8543 Месяц назад

naa its just over torqued bolts. I just busted 2 out of 4 cause 2 were not to spec. never over tighten

@tylerwilliams3868 3 года назад

The using large drills to get the center and cleaning up any burrs on the end is such a great idea! Thanks!

@SweetProjectCars 3 года назад

Glad it was helpful! Thank you for watching and sharing Tyler! Have a great day. mad Mike the hammer SPC

@NormKohn 5 лет назад

Awesome explanation and very useful for broken bolts. Thank you

@saabjunkieSPG 5 лет назад

Another great video, many thanks. I’ll definitely use these tips.

@MyGuyKirby 5 лет назад

Thanks, never knew to use oversized bits to make the first part of the extraction!

@howardlazoff1274 5 лет назад

Great demo. Straight to the "point."

@nickysantoro9194 4 месяца назад

I literally watched tons of these. The best one on line is right here. Nobody else clarifies shit.

@Hungrybird474 5 лет назад

I love your videos by the way . Thanks for sharing the knowledge . RU-vid ...pay this man !

@hcoleman2538 5 лет назад

SPC I can watch your videos all day and still learn something new each time!

@SweetProjectCars 5 лет назад

Thank you my good friend that means a lot to us more than you know

@Kingsplane 2 месяца назад

Thanks friend. Needed a reminder after being out a while. Broke two brittle bolts off in a 20+ year old power steering pump. Heres to extracting, although can’t use the big bit method it’ll mess with the seal on those job, but I’ll try it in the future.

@adrianopangelinan7011 3 года назад

Great video! I have the tool didn't know how to use it until now. Was wondering why you needed the other drill bits and now I know why. Thanks.

@SweetProjectCars 3 года назад

Glad we could help! Thanks for sharing, have a fantastic day my friend. mad Mike the hammer SPC

@AntonBabiy 5 лет назад

Gotta say that kind is my favorite too. But when a rusty exhaust manifold stud breaks, that's when the real fun starts haha

@SweetProjectCars 5 лет назад

I'm with you on the heavily rusted bolts we just hit those with a torch and they come right out, but they can be a real pain

@erienwhite 5 лет назад

Outstanding tips. A suggestion. Try the Rigid extractors. They're life savers. Also get them through Blue Point.

@rayjones3212 5 лет назад

Hey Mike :) I haven't commented for a bit. Been busy coming up with a plan to find and have a custom-built RV for the Mrs. & I. (A van-type RV on a Promaster.) So I've been pretty busy in the past few weeks. Nice job on showing us another way to get broken studs / screws out. I hadn't ever thought about the "setup process" you went thru before you backed it out with the extractor. I can see how that would make it a lot easier. Take care my friend. See you on the flip side. And as always, thanks for sharing your talents with all of us.

@SweetProjectCars 5 лет назад

Hey Ray good to see you again my friend :)

@jeffriggs5174 2 года назад

This was the best video on removing a broken bolt,that Iv'e seen yet.It has educated me alot,and this is what I will try and do next time.Thanks alot for a great video.

@SweetProjectCars 2 года назад

Glad it helped Jeff! Thank you so much for watching and sharing, we really appreciate it, hope you have a great day my friend. mad Mike the hammer SPC

@MrNicoe36cabrio 5 лет назад

Great tip Mike. I have used these a couple of times and they are fantastic indeed!

@GORD444 4 дня назад

I broke an aluminum bolt off in the throttle body of my 87 vette. Its a bolt for the tps. This makes me stress about it less. Just subbed

@michaelflores9778 5 лет назад

Fantastic TIPs thank you!

@Tec2Nut 5 лет назад

Another great extract, fabulous

@ronarter5162 4 года назад

Great info. About to try getting a header bolt out of an aluminum head. Wanted good info before trying. Here we go....

@SweetProjectCars 4 года назад

Glad it helped! Good luck with your bolt removal! Have a fantastic day thanks for being with us! mad Mike the hammer SPC

@duckthis17 5 лет назад

Those are the good extractors. I always add a little heat (torch) now and seldom have to repeat the process.

@thetraindriver01 5 лет назад

Great tip mike, thanks 👍👍👍

@rolandobonilla6929 3 года назад

Thank You So Much, You are The Best video I seen in RU-vid to how to extract a bolt out.

@SweetProjectCars 3 года назад

Glad it helped! Thanks for watching. Have a great night. mad Mike the hammer SPC

@mrmanitoba 2 года назад

Thanks for the tip! I sheared off a starter motor bolt on my Chevelle and had to remove header. I started with a larger, then smaller drill bit like you said. Then the screw extractor and presto it was out.

@SweetProjectCars Год назад

Glad we could help!! Thank you for watching and sharing your results, we really appreciate it mrmanitoba, have a fantastic day my friend. mad Mike

@grabir01 5 лет назад

The best way is to lay a nut on top of it, then wire feed weld the center of the nut to the broken bolt/stud and while still hot, unscrew it. Best way to remove them ever!!

@SweetProjectCars 5 лет назад

you are correct and we do that all the time but most diyers dont have that mig welder available to them :)

@JohnDavis-xk5fi 9 месяцев назад

Most people don't know how to weld and don't have any welding equipment.

@clamojoat8543 Месяц назад

ya most people dont have that gear. would need to take it to a shop. like me I think im gona have to. ive got left hand bits but I dont have the space get do the work

@89volvowithlazers Год назад

right on sir, doing a 30yr old outdoor spigot and sheared off the screw head of the handle, as expected... so,,,,, boom and now I know good tips to start small build up thanks for that huge ...

@SweetProjectCars Год назад

Our pleasure to help! Thank you for watching and sharing, have a fantastic day my friend. mad Mike the hammer SPC

@paulleavitt9550 4 года назад

Thank you so much for the video and the tool info! Lifesaver!

@SweetProjectCars 9 месяцев назад

Absolutely, it's our pleasure Paul! Thank you for watching and sharing, we really appreciate it, hope you have a sweeeeet week my friend. mad Mike

@gedhiggins1032 5 лет назад

ace hacks n tips pure helpfull 👍

@reydelsol7026 5 лет назад

Flippin awesome!!! Thank you!

@TheJbrantl 3 года назад

Great tip, this will be very helpful at work, thank you

@SweetProjectCars 3 года назад

Glad it was helpful Joshua! Thank you for watching and sharing, we really appreciate it. Hope you have a great weekend. mad Mike the hammer SPC

@kevinstreet5709 4 года назад

Brilliant tips on drilling, thank you

@SweetProjectCars 4 года назад

kevin you are very welcome

@dbacksfan67 4 месяца назад

I had tried the counter screw extractor with no luck. After using your suggested drilling technique I was able to remove the stuck oil due drain plug.

@Mr0elias0 4 месяца назад

Thank you so much i bought an excavator and one of the hoes broke when i replaced it the screew broke and left part inside just like one of your demonstrations i called like 3 mechanics explained and all said they couldn't help so i went to youtube and not only did you teach me how to fish you save me money and now i have to tools to unscreew any broken skreew or bolt with no worries so thanks again really appreciate this video and save me time and money too

@brandonedwards7166 2 года назад

I want to see you extract a steel bolt that has been broke off flush in an aluminum engine block under the header where you cant see it. This is quickly turning into an engine out procedure.

@SweetProjectCars 2 года назад

Well, it always depends on how much tenacity you have, we will do whatever it takes to get a busted bolt out. Thanks for watching and sharing, have a great day and all the best on your project my friend, I feel your pain. :( mad Mike the hammer SPC

@AN-kg4ei 5 лет назад

If you have a small MIG welder, tack a worn out driver bit to the broken bolt and then wind it out with a drill... the bonus is that the heat shocks/loosens the bond due to expansion/contraction. It works every single time. Give it a try if you don't have these ez outs but you have a wire welder...

@SweetProjectCars 5 лет назад

AN you are correct we do the mig welder every week it seems but with this channel based on the DIYer that doesn't have that tool we share how they can still have success with simple hand tools

@josephthegoat1179 11 месяцев назад

I think I have to do this due to space I the gun don’t fit

@wba68 5 лет назад

Simple and AMAZING. thanks Mike my friend. 👍😎👍 Brian, Rome Georgia

@SweetProjectCars 5 лет назад

Thank you Brian we truly appreciate that

@vanh6931 4 года назад

Thank you so much for the easy to understand video.

@SweetProjectCars 8 месяцев назад

Our pleasure Van! Thank you for watching and commenting, hope you have a sweeeeet week my friend. mad Mike & team

@johnjackson-pu3xo 5 лет назад

Awesome tip

@mattsmith6828 5 месяцев назад

saved this video to my play list and gave a thumbs up! simple, great info and no 6 minute intro to blankly stare at. i just have one critique - i would use left handed drill bits instead. sometimes the snapped off bit will twist in the direction of the drill bit, and it's better for it to come out rather than further into the hole. keep up the good work!

@SweetProjectCars 5 месяцев назад

Thanks for the view and for your input, it's always appreciated my friend. Have a great week Matt. mad Mike & team

@dawin6710 2 дня назад

Great video! now let's see I will be as good as you in this clip. But I already feel more encouraged though. Thanks

@SweetProjectCars День назад

Glad I could help! Thank you for watching and sharing, hope you have a great day my friend. mad Mike & team

@dawin6710 День назад

@@SweetProjectCars it worked. I'm so happy now. Thanks again.

@clanrobertson7200 5 лет назад

Very educational. Thanks The old professor

@k.1873 7 месяцев назад

Thanks for video! Helped me get a sheared bolt out of my Toyota Tacoma truck bed!

@SweetProjectCars 7 месяцев назад

Good deal glad we could help merry Christmas my friend mad Mike

@ScotWalt858 5 лет назад

Good stuff!!

@swm122758 5 лет назад

Depending on the job you may also check with your local tool rental business for an inductive bolt heater. No flame to worry about starting fires or damaging near by plastic/rubber parts. Inductive coils come in multiple sizes and even a free-form section for custom configurations. Great tip though, Mike!

@UOttawaScotty 3 года назад

I just bought one of these and it's been great so far !

@martynj-c4965 5 лет назад

I use a very small socket over the end of the extractor and the ratchet which i found helps to get a better starting grip bc you can put just a little pressure on it ... had to remove a snapped pinch bolt and another anti roll bar bolt that both snapped bc of rust ...worked brilliant 🙏

@SweetProjectCars 5 лет назад

there are many methods to remove we just show what the average diyer would have on hand

@duckthis17 5 лет назад

Always good stuff..........

@tardeliesmagic 5 лет назад

Nice!

@user-gn5uy6lx7z Год назад

Going to give this a try. Thanks

@SweetProjectCars Год назад

Glad we could help William! Thank you for watching and sharing, have a great week. mad Mike the hammer SPC

@sciflyer67 3 года назад

If the broken bolt is jagged or raised, you can use a large flat punch to flatten out the bolt center which makes it easy to get your center punch in the right spot.

@SweetProjectCars 3 года назад

Thank you for sharing we truly appreciate that Mad mikes sweet project cars

@ttiwkram 3 года назад

And it also gives a mechanical shock to the bolt, which can help break it loose.

@dacarwash6820 5 лет назад

Awesome job

@christineames7631 3 года назад

Thanks first time ever! I hope it isn't beginners luck! If I ever have to do it again!

@jasonwalton2065 2 года назад

Outstanding vid! I bought that stuff figuring it would come with instructions. 🤣

@SweetProjectCars 2 года назад

Glad we could help! Thanks for watching and sharing Jason, have a great weekend. mad Mike the hammer SPC

@tunafish3216 5 лет назад

I use left hand drill bits for this sometimes it will come out with the bit.

@moulin6 3 года назад

Thanks for the video! Got yourself another subscriber 👍

@SweetProjectCars 3 года назад

Awesome, thank you! Welcome aboard my friend! Glad to have you with us, hope you have a fantastic day. mad Mike the hammer SPC

@jacknjanesshowtell9499 3 года назад

That's a helpful tip about using the larger bits to start the hole.

@SweetProjectCars 3 года назад

Thank you very much, we appreciate your view and comment. Have a great day. mad Mike the hammer SPC

@genehudson665 5 лет назад

Try a left hand drill bit, some times it will bring the bolt out

@garymitchell6897 3 года назад

Always found the parallel spline wurth type of extractors work best as they don't expand the broken bolt as the taper extractors do.

@SweetProjectCars 3 года назад

Thanks for sharing Gary. Have a great day. mad Mike the hammer SPC

@roguetactical852 4 года назад

Thank you!!!

@SweetProjectCars 4 года назад

Glad to help! Have a great day! mad Mike SPC

@noidretlaw Год назад

Thanks man. Good concise example

@SweetProjectCars Год назад

Glad it was helpful! Thank you for watching and sharing, have a great week my friend. mad Mike the hammer SPC

@dillee9988 3 года назад

Thank you !

@SweetProjectCars 3 года назад

You're welcome! Thank you for watching Dil Lee! Have a fantastic day. mad Mike the hammer SPC

@vladimirtrump1068 3 года назад

thanks for sharing!

@SweetProjectCars 3 года назад

Our pleasure Vladimir! Thank you for watching, we really appreciate it, have a great day my friend. mad Mike the hammer SPC

@franciscoluna2126 2 года назад

Thank you brother motor mount failed and snapped a bolt on 07 civic. Easy as pie 👌

@SweetProjectCars 2 года назад

Nice work! Glad we could help Francisco! Thank you for watching and sharing your results, we really appreciate it, hope you have a great week my friend. mad Mike the hammer SPC

@davenevarez4738 5 лет назад

Yes sir!

@dutchleussink156 3 года назад

Thank You Sir 👍

@SweetProjectCars 3 года назад

Our pleasure my friend. Thank you for watching and for the thumbs up, we truly appreciate it. Hope you have a great weekend. mad Mike the hammer SPC

@dontworry6256 2 года назад

Thank you sir

@SweetProjectCars 2 года назад

Our pleasure my friend. Thank you for watching, have a great day. mad Mike the hammer SPC

@stephaniehansen4508 3 года назад

Nice I wish everyone did there videos like u GJ

@SweetProjectCars 3 года назад

Our pleasure Stephanie, we really appreciate the view and comment, hope you have a fantastic day my friend. mad Mike the hammer SPC

@jons2447 5 лет назад

Hey Mike, Thank You, another great video. FYI, I used to use left-handed drill bits for broken bolts / screws, but the left-handed extractors should do just as well if not better. Keep up the good work. Have GREAT day, Neighbor!

@colstace2560 5 лет назад

Thumbs up for left handed drill bits. Also I would never use a crescent wrench on an extractor, use a tap wrench !! 😊

@jabierlopez8289 3 года назад

Excellent 👌👌👌

@SweetProjectCars 3 года назад

Thanks a lot Jabier, we really appreciate your view and comment my friend. Hope you have a nice evening. mad Mike the hammer SPC

@sherifbadawy8188 3 года назад

thank you

@SweetProjectCars 3 года назад

You're welcome! Thanks for being here with us, we really appreciate it. Have a great day. mad Mike the hammer SPC

@redskin4040 5 лет назад

I used these all the time when I use to operate a CNC. Easiest way IMO

@SweetProjectCars 5 лет назад

redskin thats cool ran a few cnc mills and lathes in my tool and die days they are quite amazing machines

@tuuljargal2629 4 года назад

Thank you...

@SweetProjectCars 4 года назад

You're welcome! Glad we could help! Have a stupendous day! mad Mike the hammer SPC

@Nytellem 2 года назад

Took it to the mechanic, there was a bolt busted in the Valve cover for one of the spark plug caps and they claimed it would take 2hours. So I had to look this up myself to see.

@SweetProjectCars 2 года назад

Thanks for watching, hope this helped my friend. Have a great day. mad Mike the hammer SPC

@PhillyDee215 4 года назад

Nice video👍

@SweetProjectCars 3 года назад

Thank you very much, we truly appreciate it! Have a great day. mad Mike the hammer SPC

@claudenoto5137 5 лет назад

Great tip as always!

@luperojas381 Год назад

thank you sir.......

@SweetProjectCars Год назад

Glad to help Lupe! Thank you for watching and commenting, have a great week my friend. mad Mike the hammer SPC

@blancaolvera7163 3 года назад

I got my screw out thank you so much

@SweetProjectCars 3 года назад

Awesome!! That's great to hear Blanca! Thanks for watching and sharing, we appreciate it my friend. Have a great day. mad Mike the hammer SPC

@christiantorres8858 2 года назад

You're a wizard harry

@SweetProjectCars 2 года назад

LOL, thank you Christian! We really appreciate the view and comment, hope you have a great week my friend. mad Mike the hammer SPC

@StanOnDemand 4 года назад

What type of drill is the black coded one you used to drill out stud before using the extractor?

@SweetProjectCars 3 года назад

This amzn.to/2JbQnN5 is what we use. Thanks for watching and asking. Sorry for our delayed response. Hope this helps, have a great day my friend. mad Mike the hammer SPC

@tooljunkie555 3 года назад

Hell yea ! Thanks for the tips!

@SweetProjectCars 3 года назад

Absolutely Joe, it's our pleasure my friend. Thanks for watching, we really appreciate it. Hope you have a fantastic weekend. mad Mike the hammer SPC

@tooljunkie555 3 года назад

@@SweetProjectCars i was replacing a drain on a bathtub and the 2 screws that hold it onto the tub snapped off -was gonna drill them out and re tap but saw ur vid and ur technique worked like a charm! Subscribed to channel i look forward to seeing what u have done and do in future vids. And same to u! I hope ur weekend is good also.happy holiday!

@SweetProjectCars 3 года назад

Awesome Joe! Welcome my friend. Have a great week. mad Mike the hammer SPC

@tylharris Год назад

Thank you. This was super helpful for a non-handy guy like me. Got a cheese-head bolt out of a chevy trax.

@SweetProjectCars Год назад

Glad it helped Tyler!! Thank you so much for watching and sharing your results, we really appreciate it, have a great week my friend. mad Mike the hammer SPC

@jayheavey5778 5 лет назад

Thanks for another helpful DIY project! Is the next washing video coming out?

@SweetProjectCars 5 лет назад

It will be coming out within a week or so my friend

@680ecks 5 лет назад

Oh did i make a mess ! The last one i tried to do was in a intake, went out the side , made a mess of the aluminum never got the broken bolt out . I absolutely suck at it iwill try your way . Never have good drill bits that doesnt help.

@CheaddakerT.Snodgrass 5 лет назад

Very good tips. Newer to your channel. Like what you have. I recently here someone say that a carbide concrete bit drills into hardened steel really well. Might be a good idea for you to try. And make a video.

@fredgarvin4482 4 года назад

i have never ever in my life successfully removed broken bolt. yesterday and today was closest i ever came

@SweetProjectCars 4 года назад

Thanks for sharing your frustration :( Good luck on that! Have a great day. mad Mike the hammer SPC

@duttydiesel8303 Год назад

I made the mistake of tapping it lol listen to this guy DONT DO IT!!! LOL Thankfully I had 2 so I still have one to do it properly.... Instead of destroying another one I figured I'd look online, how it got the thing off was by pounding a torx socket into the hole lol that worked well... It's tomorrow's problem getting that stud off the torx socket lol

@SweetProjectCars Год назад

Glad we could help Dutty Diesel!! Thank you for watching and sharing your story, we've all been there done that LOL! Have a great weekend my friend. mad Mike the hammer SPC

@ameerahme 3 года назад

Does this work well on a smaller scale for standard screws burnt out Philips heads?

@SweetProjectCars 3 года назад

Yes it does, it works great for that. Thanks for watching and asking. Have a fantastic day. mad Mike the hammer SPC

@terryayers9653 5 лет назад

The problem I see is that broken bolt is pristine never broke one of those

@aagalani 4 года назад

What type of drill bit to use (titanium, cobalt etc)? I need to drill out a small stainless steel screw. Thanks in advance.

@SweetProjectCars 4 года назад

This is what we use for stainless steel amzn.to/30PSbDK not sure what size you need but this kit will cover them all. Thanks for the question, have a great day my friend. mad Mike the hammer SPC

@isrealperez9069 3 года назад

That was nice thanks i have a broken bolt on my engine block that supports the bracket that hold the motor mount

@SweetProjectCars 3 года назад

Thank you for watching and sharing Isreal, hope you have a great weekend and all the best with your project my friend. mad Mike the hammer SPC

@Amaymay1000 2 года назад

Mine too...

@primozmarkovic4611 4 года назад

i've broken three of this bolt extractor on a very very rusted bolts. in this demonstration is no rust seen so everything go by plan and so easy. only solution is welding a nut on a broken bolt.

@SweetProjectCars 3 года назад

Well after you broke the first extractor, common sense would tell you that you need to heat it up then it would come right out rust or no rust. Thanks. mad Mike the hammer SPC

@scottatkins1499 3 года назад

Thank you, saved my ass today!

@SweetProjectCars 3 года назад

Glad we could help Scott! Thank you for watching and sharing, we really appreciate it, have a great week my friend. mad Mike the hammer SPC

@ryansmotorsports2199 3 года назад

What size screw extractor did you use? Also what drill bit sizes did you use?

@SweetProjectCars 3 года назад

It depends on the size of the bolt you are removing, always go one half the size for the drill bit and extractor compared to the bolt size. So if you have a 1/2" bolt you will use a 1/4" drill bit and the appropriate extractor. Hope this helps, thanks for watching and asking Ryan! Have a great day. mad Mike the hammer SPC

@kennethperian4370 2 года назад

Yes thanks for showing telling about that , I’ll be taking off my heads off my 460 v8 . Got three bolds broke off each side 6 all together. Thanks see ya bye bye

@SweetProjectCars 2 года назад

All the best with that project Kenneth! Thank you for watching, have a great day. mad Mike the hammer SPC

@kdotktimetopurge8549 3 года назад

Thank u u got my sub for helpin me

@SweetProjectCars 3 года назад

Thank you very much, glad we could help my friend! Welcome aboard, glad to have you with us. Have a fantastic day. mad Mike the hammer SPC

@haynlaskan9668 Год назад

I have a bolt i was trynna torque to 300 ftlbs. But got it to like 275ftlbs when it snapped, do i have a chance doing it this way ?

@SweetProjectCars Год назад

Try it HaYn, also see this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Cd5aqurqqig.html it is another option for you. Thanks for watching and asking, good luck to you on your project my friend, been there done that! mad Mike the hammer SPC