Тёмный

How to Remove Carrier Bearings 

The BFH Garage
Подписаться 25 тыс.
Просмотров 21 тыс.
50% 1

This video is a quick demonstration to show how to remove carrier bearings. Although there are other methods out there, these are the three most common which focuses on the DIY people.
Disclaimer: The following disclaimer applies to The BFH Garage RU-vid channel (referred to as "the Channel"). By accessing or using the Channel, you acknowledge and agree to the terms and conditions of this disclaimer. If you do not agree with these terms, please refrain from accessing or viewing the Channel.
Content: The Channel provides automotive-related content, including but not limited to repair guides, maintenance tips, product reviews, and general information. The information presented on the Channel is based on the personal opinions and experiences of the Channel's creator and contributors. However, the Channel makes no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability of the information, products, or services mentioned. The content is provided for informational and entertainment purposes only and should not be considered professional advice.
Personal Responsibility: The Channel encourages responsible automotive practices. However, any actions or decisions you take based on the information provided on the Channel are solely your responsibility. The Channel cannot be held liable for any damages, injuries, or losses that may occur as a result of following or implementing any information or advice presented on the Channel. Always exercise caution, consult professionals, and adhere to safety guidelines when working on or modifying vehicles.
Third-Party Content and Links: The Channel may include links to third-party websites, products, or services. These links are provided for convenience and informational purposes only. The Channel does not endorse or have control over the content, products, or services offered by third parties. Accessing or using third-party content is at your own risk, and the Channel shall not be responsible for any damages, losses, or issues arising from such content.
Intellectual Property: All intellectual property rights, including copyrights, trademarks, and any other proprietary rights, in and to the Channel's content (including videos, images, graphics, logos, and text) are owned by or licensed to the Channel. You may not reproduce, distribute, modify, display, perform, or otherwise use any content from the Channel without obtaining prior written consent from the Channel.
Changes to the Disclaimer: The Channel reserves the right to modify, update, or change this disclaimer at any time without prior notice. It is your responsibility to review this disclaimer periodically for any changes. Your continued use of the Channel after modifications to this disclaimer will constitute your acknowledgment and acceptance of the modified terms.
Governing Law: This disclaimer shall be governed by and construed in accordance with the laws of the jurisdiction in which the Channel operates. Any disputes arising out of or in connection with this disclaimer shall be subject to the exclusive jurisdiction of the courts in that jurisdiction.
If you have any questions or concerns regarding this disclaimer, please contact us through the appropriate channels provided on the Channel.
Last updated: May 11, 2023

Авто/Мото

Опубликовано:

 

25 дек 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 24   
@BigZaddy2112
@BigZaddy2112 13 часов назад
Thank You! I did the same thing with the Dremel and then used my handy Harbor Freight press!
@Sometimes_I_YT
@Sometimes_I_YT Год назад
Nice job on this one Mike. Looking forward to seeing the new Jeep soon!
@Y2J19831
@Y2J19831 2 месяца назад
Did exactly what you did and bearing popped right off. Thanks very helpful video
@cfratify
@cfratify Год назад
This totally works, however I ended up getting a piece of metal schrapnel embedded in the tip of my finger when a corner of the hard bearing steel broke off, went like a bullet straight into me! Wear gloves!! Or better yet (I did this on the second one) grind a little extra and form a V notch instead of a straight notch, to match the angle of your chisel. This way things wont want to fracture so readily, and also the force transmits to a spreading action instead of an edge just trying to dig into the flanks of the chisel.
@TommyKiid
@TommyKiid 8 месяцев назад
My chisel slipped and damaged the journal under the cone with a slight nick, am I ok to press on new bearings or is the diff no good now?
@TheBFHGarage
@TheBFHGarage 8 месяцев назад
Depends on how bad. The big thing is to smooth it out.
@joaoboia7837
@joaoboia7837 Год назад
Hi Mike, another great content! when you don’t have new bearings (and spec info)and cannot compare the wearing of old bearings how to determine if they need to be replaced? Regards
@TheBFHGarage
@TheBFHGarage Год назад
The carrier should have some preload. If it doesn't, and you can pull it straight out without using force, then they are probably worn. The main thing I do is pull the carrier and inspect the bearings. If the rollers are pitted or damaged in any way, then they need replaced.
@joaoboia7837
@joaoboia7837 Год назад
Thanks, great help . I am waiting for my clamshell puller, Christmas gift for myself. Regards
@Jennifer-wc5ek
@Jennifer-wc5ek 3 месяца назад
So my husband used the dremel method and he did fine but it still wasn’t cracking when he hit it with the cold chisel so he cut a bit more and knicked the top of the journal. Is this a total loss or will it not cause any issues?
@TheBFHGarage
@TheBFHGarage 3 месяца назад
Should be fine
@ace36m
@ace36m Год назад
Watched all your videos on gears, some of them multiple times. I just remove the carrier out of my Dana 44 today, and next weekend I will be installing an ARB and new gears. I've heard you say on a couple videos that that you have done enough gears that you know roughly about where to start shim wise. Any pointers on starting shims for a Dana 44 and a Dana 30? Of course going from stock carriers to ARBs with 5.13s, not that the gear size matters, and I have set up races for both.. Thanks
@TheBFHGarage
@TheBFHGarage Год назад
Start with what was in the axle as a baseline. It'll put you very close. My guess for starting shims is when I start with an empty housing, otherwise I'll use what's in there already. For a Dana 30 and 44 it'll be roughly 50-60 thou.
@ace36m
@ace36m Год назад
Thank you, again, for the information. I can measure the pinion to get a reference, but the carrier not so much. My plan was to measure the pinion and try and guestimate what is on the carrier.
@TheBFHGarage
@TheBFHGarage Год назад
@@ace36m the carrier will be what it will be. Keep adding shims until it gets tight. Move them side to side until you get your backlash in spec. You shouldn't be able to pull the locker out by hand.
@mefistofer
@mefistofer Год назад
I did mine with the Dremel method but that tool is something else... If I had a shop that would be my choice
@TheBFHGarage
@TheBFHGarage Год назад
That's exactly why I got it 😂
@jonpaff5699
@jonpaff5699 Год назад
When replacing the bearing do you have to reset the gears?
@TheBFHGarage
@TheBFHGarage Год назад
No. As long as you put the shims back exactly where they were.
@Astro_GSD
@Astro_GSD Год назад
I removed my carrier on my jk and it didn’t have any shims on either side
@TheBFHGarage
@TheBFHGarage Год назад
🧐
@dcp4988
@dcp4988 Год назад
Ordered a clamshell bearing puller from ebay... yea, got one bearing off the 10.5. Doing the other side, that monster threaded rod ended up punching through the nut when tightening. Mine was Cheap china stuff.
@TheBFHGarage
@TheBFHGarage Год назад
Yeah, typical with most made in China stuff unfortunately.
@newedgefrank3257
@newedgefrank3257 11 месяцев назад
Shows us different tools to remove bearing proceeds to bootleg homemade remove the bearing. 😂
Далее
How to use a Clamshell Bearing Puller
9:53
Просмотров 21 тыс.
IQ Level: 10000
00:10
Просмотров 4,4 млн
Штаны легионера
00:44
Просмотров 229 тыс.
Tips for Installing Differential Carrier Bearings
5:31
The Ultimate DIY Bearing Puller
5:46
Просмотров 25 тыс.
Differential Contact Patch Best Technique
3:26
Просмотров 154 тыс.