Тёмный

How to remove EXHAUST MANIFOLD on a TD5 LAND ROVER DEFENDER by Land Rover Drive 

Land Rover Drive
Подписаться 13 тыс.
Просмотров 8 тыс.
50% 1

Since my manifold warped I had to remove the exhaust manifold so I could get it fixed. So this is a video of how I removed the exhaust manifold on my Land Rover Defender TD5. The manifold will get planed, in a later video, and then put back on. No dewebbing will be done, as I explain why in the video.
Remember to support the channel by subcribing and support us even more by becomming a Land Rover Drive Patreon.
PATREON: / landroverdrive
Enjoy and hit me up with a comment to let me know what you think about the video or if you have any questions. Best, Simon.
Affiliate links:
iiDTOOL BT UK-ebay link:
ebay.us/b7uLCO
iiDTOOL BT US-ebay link:
ebay.us/W4sC8W
JETBOIL UK:
ebay.us/6b2Ybp
Edited in Adobe Premier Pro by Simon Schybaj Mastermo - SIMON FILM STUDIO MASTERMO
"This video details contains affiliate links for which I may be compensated for."
Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!
LAND ROVER DRIVE
Land Rover Drive is a RU-vid channel created and run by me, Simon Schybaj Mastermo. Here you will get to see Land Rover, Overland, Offroad, camping and garage videos. Winter overland, winter offroad, winter camping and winter preperations. There will be overlanding in Norway, offroading in off road areas, reviews on cars and gear, workshop and how to fix you car, welding and painting, On the channel you will see Land Rover Defender 90, Defender 110, Defender 130, new Defender, Land Rover Series 1, Series 2, Series 3, light weight, Land Rover Discovery 1, Discovery 2, Discovery 3, Discovery 4, Discovery 5, Range Rover, Range Rover Sport, Range Rover Classic, Land Rover Freelander, Freelander 2. Petrol and diesel, TD5, 200tdi, 300tdi, TD4, TDV6, SDV6, V8, V8 supercharged.
Team cars:
Simon
Land Rover Defender 110 TD5
Land Rover Discovery 3 TDV6
Ørjan
Land Rover Defender 90 200TDI
Land Rover Discovery 4 TDV6
Erik
Range Rover Classic 2 door
Land Rover Defender 110 TD5
Land Rover Discovery Sport
Camera gear:
Canon M50
Canon 24-70mm 2.8L
Gopro Hero 7 Black
Gopro Hero6 Black
Gopro Karma Grip
Edited in Adobe Premier Pro by Simon Schybaj Mastermo
Remember to subscribe:
/ landroverdrive
Subscribe to my private channel: / simonmastermo
Like and hit that notification button so you don't miss out on new content.
You can find Land Rover Drive on:
Facebook: / landroverdrive
Instagram: / landroverdr. .
web: landroverdrive.com

Авто/Мото

Опубликовано:

 

18 сен 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 13   
@LandRoverDrive
@LandRoverDrive 3 года назад
Let me know what you think about the video!! 👍😁 Working on the sound so hopefully it’s getting better. 😊 If you have some tips and tricks about removing the manifold please share. 👍😁
@sroberg9800
@sroberg9800 3 года назад
Great video man, watching it a great way to prepare for the upcoming, going through the exact same thing renovating a 2002 Defender TD5, got 4 manifold studs to drill out of the head block, 2 both fore and aft 🙁, fuel pressure regulator next, for the second time ,
@LandRoverDrive
@LandRoverDrive 3 года назад
Thanks man. 4 studs, even more bad luck thank me. I wish you the best of luck with that job. 👍 I tried to make the video as detailed as possible so people can get a real look into what's needed. Hope it gave a good insight. There is a whole series on this job if you haven't seen the others. Best of luck, Simon
@TheSynthnut
@TheSynthnut 2 года назад
Thanks for the video. I was prepared for sheared studs, but in the end had to give up as the three holding the turbo were just impossible. The manifold ones seemed fine. The frustration is that I need to drill out the two bolts that held the EGR onto the manifold. A simple job that turned brown pretty quickly.
@LandRoverDrive
@LandRoverDrive 2 года назад
Yeah, I had the same issue with the EGR-pipe bolts. I also broke of a helicoil so it made the situation even worse. But with it drilled out and a costmised bolt/nut setup it worked great. I have seen some videos of people welding the bolts to a nut to get them out and it seems to be the most effective method. I hope you get it sorted, it took me much longer to do than I first expected. 😅
@TheSynthnut
@TheSynthnut 2 года назад
@@LandRoverDrive Well, I got there in the end, with a lot of heat from a large blowtorch on the turbo bolts. BUT, when reattaching the manifold, the rearmost stud sheared underflush. Not blowing yet, so leving it for now!
@LandRoverDrive
@LandRoverDrive 2 года назад
@@TheSynthnut Hehe, bad luck I guess. Will cross my fingers for you then. I pushed the TD5 really hard on the trip it failed so I guess if you drive carefully it will hold. 🤞
@michaelwillett1990
@michaelwillett1990 3 года назад
Im in the process of removing my turbo off the manifold on my td5 and mine arent coming no where near that easy dang it hahaha
@LandRoverDrive
@LandRoverDrive 3 года назад
Hehe, yeah, this was not the first time I have had it of. I actually don't remember it being to hard the first time. Use some heat if you can. :)
@LandRoverDrive
@LandRoverDrive 3 года назад
And good luck! 👍🙂
@michaelwillett1990
@michaelwillett1990 3 года назад
They broke loose eventually
@LandRoverDrive
@LandRoverDrive 3 года назад
Good to hear. A bit scary when they crack open, “did they break”. 😂😂
@michaelwillett1990
@michaelwillett1990 3 года назад
@@LandRoverDrive no breaking , they just cracked loose and undid like they shoulda
Далее
How to remove BROKEN BOLTS - DIY - NO WELDING
10:14
Просмотров 4,1 тыс.
PORTAL SPAMMER🤬🤬🤬| Doge Gaming
00:19
Просмотров 1,7 млн
Land Rover Discovery 2 Warped Manifold Fix
20:35
Просмотров 6 тыс.
Land Rover TD5 top end noise! injectors, tappets or?!
27:21
Broken LS Exhaust Bolt Removal - Best Trick Ever!
13:56
Discovery 2 TD5 exhaust upgrade and EGR delete.
11:48
Td5 Hack!!
7:38
Просмотров 37 тыс.
Defender Td5 Wastegate Sticking
16:59
Просмотров 47 тыс.
Warped TD5 Exhaust Manifold Replacement with injury!
3:28
EXEED VX отзыв владельца #shorts
1:00
Просмотров 3,4 млн
Küçük Çalışmalar
1:00
Просмотров 2 млн
EXEED VX отзыв владельца #shorts
1:00
Просмотров 3,4 млн