How to Repair An Extension Cord - Replace The Plug!

Подписаться 160 тыс.

Просмотров 97 тыс.

50% 1

If you have a damage electrical cord, repairing it by simply replacing the plug is far easier than you may think, and cheaper, too! In this video I cover all the background information a complete novice needs to understand to safely repair the most common types of electrical cords in North America.
#ExtensionCord #ElectricalCord #ReplaceThePlug
SHOP
🛒 NEMA 5-5 Female: amzn.to/3LMW1lE
🛒 NEMA 5-15 Male: amzn.to/35XapIX
🛒 Lighted Plugs: amzn.to/37bvkIC
🛒 Wire Stripper/Cutter: amzn.to/37uEQGz
🛒 Socket Tester: amzn.to/35QqWya
🛒 Soldering Iron: amzn.to/3uyontH
🛒 Heat Gun: amzn.to/3uyIUOR
🛒 Basic Screwdrivers: amzn.to/3jfAVjR
🛒 Retractable Razor Blade: amzn.to/3JqzEAN
(by clicking a link above this channel earns a few pennies, but it does not cost you anything extra)
🔗 How I Store Extension Cords: • Extension Cord Pro Tips
🔗 More Info On NEMA Standards: en.wikipedia.org/wiki/NEMA_co...
You can help me with future projects!
☕️ www.buymeacoffee.com/amplifydiy
CHAPTERS
🕐 0:00 Introduction
🕐 0:58 Types Of Replacement Plugs
🕐 1:40 Tools Required
🕐 2:15 Which Plug Do You Need?
🕐 4:32 Types Of Internal Connections
🕐 4:57 Replacing a 2 Prong (NEMA 1-15) Plug
🕐 6:45 Screw On Connections
🕐 8:58 Replacing a 3 Prong (NEMA 5-15) Plug
🕐 10:58 Clamp Connections
🕐 13:00 Lighted Plugs
🕐 16:20 Testing The Repair
🕐 17:27 Conclusion
🕐 18:06 Bloopers
AmplifyDIY is a channel dedicated to do-it-yourself projects with in-depth tutorials on a wide range of subjects.
New videos are published frequently. Want to make sure you don't miss any? Subscribe now!
ru-vid.com?su...
Check out the full channel here:
/ amplifydiy
Follow builds in real-time on Instagram!
/ amplifydiy
MUSIC IN THIS VIDEO:
🎵 Bouncing Shoes - Earle Belo - www.epidemicsound.com/track/9...
🎵 Bits and Pieces - Mica Emory - www.epidemicsound.com/track/w...
🎵 Different Type Of Vibeo - Matt Large - www.epidemicsound.com/track/c...
🎵 West Coast - Ch@nterelle - www.epidemicsound.com/track/N...
🎵 Go With It - Daxten - www.epidemicsound.com/track/5...
🎵 Lotus - Magnofield - www.epidemicsound.com/track/K...
DISCLAIMER:
This video may contain Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases, at NO cost to you. This helps me grow this RU-vid channel, and I appreciate your help.
The content provided in this video is for informational use only. Video content is provided at the viewers own risk and the viewer will not hold the parties involved in creating, producing or delivering this information liable for any loss, injury, claim, liability, or damage of any kind resulting in any way from any errors in or omissions from the information. Thanks for understanding.

Хобби

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 111

@len9518 2 года назад

As elementary as this is, your video, explains and shows it best.

@AmplifyDIY 2 года назад

Thank you very much, Len!

@user-gv6iv2rx7u 10 месяцев назад

@@AmplifyDIY12:58

@midnight121190 Год назад

I love that you’re wearing an essential craftsman shirt!!

@HiteshDesaIAUM Год назад

You have given us perfect information for joining cables in different plug. I appreciated.

@dougc78 2 года назад

Simple, straightforward, informative & clearly delivered! Thanks for sharing.

@AmplifyDIY 2 года назад

Glad you enjoyed it, Doug!

@hughw2427 2 года назад

This is a very thoughtfully made video. He explains and demonstrates everything so well and up close. I've never repaired an extension cord but after watching this, I think I could do it with no problems. Excellent video!

@AmplifyDIY 2 года назад

Wow, thank you, Hugh!

@canstaff Год назад

You just got a new subscriber to your channel! You have amazing Videos and so educational even to an average knowledgeable homeowner as myself. Keep up the good work!

@andiharp9275 6 месяцев назад

I really like how simple his explanations were, n how he accompanied them with great close-ups as he went through the steps - so, really great timing... 👍 It was also nice that he didn't do a rush job. Also, he didn't "talk down" to his viewers, as if they were total idiots. He was very respectful in this. I have replaced plug ends, n helped my son with his endeavors of replacing a couple in the recent past. Sadly, one end got hot n melted on one of them. So, because I wasn't real familiar with the style he used, I searched n came across this video - after checking out another one that was not very helpful. This video helped to figure out where he went awry. 😆 I don't know how I could have missed it when my son replaced the plug. 😢 Niw off to replace it again, with confidence. 😉 Thank you for a well done video. ✌️

@AmplifyDIY 6 месяцев назад

You've made my day, Andi! Thank you!

@alisonwilliams9465 Год назад

Saved myself some money, replacing my vacuum cord myself, thanks to your excellent instructions.

@AmplifyDIY Год назад

Awesome, Alison!

@MySugarCookiesCo 9 месяцев назад

Thanks for sharing. This video is really helpful!

@KathrynFritze Месяц назад

Excellent tutorial. Thanks

@lynnepear Год назад

Nicely done!

@jamesD104 2 года назад

Very well done, thank you.

@heyitsrick5701 Год назад

Great job on this video. Tks!

@larryv4249 2 года назад

Your tone, tenor, and cadence are perfect for this sort of video. I am wondering if UL or ETL listing for these cord ends are important, or even required. Looking forward to your next video.

@marymcclanahan1757 2 года назад

I think your presentation was perfect! Thanks!

@AmplifyDIY 2 года назад

Glad you think so, Mary!

@steveweber7902 Год назад

great video I never usually touch electric projects but I tried this time. I changed a pug on a extension cord and followed your instructions and everything went well. my extension cord is working again. thanks for the excellent instructions.

@AmplifyDIY Год назад

I'm so glad it helped, Steve. Nice job!

@steveweber7902 Год назад

@@AmplifyDIY thanks. I usually don't fool around with electric but I gave it a shot & it worked out. HAPPY HOLIDAYS TO YOU & YOUR FAMILY. 🎄

@missmiller7829 Год назад

Those two downvote were done by accident because this video is Grade A+

@pedrorojas6934 2 года назад

Thanks for sharing this Excellent video with good Explanation I learn so much!

@AmplifyDIY 2 года назад

Thanks, Pedro! I'm glad you found it helpful!

@johnupchurch7685 Год назад

Very good video!

@freddie4126 Год назад

Outstanding instructional video!

@AmplifyDIY Год назад

Thank you!

@jim7smith Год назад

Well done!

@cynical1877 Год назад

Thank you sir.

@CindySalazar-oy9gb 8 месяцев назад

THANK YOU SO MUCH

@kristinetarantino3458 5 месяцев назад

Very well explained 😊

@AmplifyDIY 5 месяцев назад

Thanks a lot 😊

@jjjacer 2 года назад

@4:35, i wish me local stores had that type for 2 prong, only ones i could find used friction and pressure from the cable to the prongs via the casing, fine i guess for a lamp cord, but not something i would like in a high traffic area.

@retire-man Год назад

Well done

@mogarvey3007 Год назад

Thank you very much I've learned alot

@AmplifyDIY Год назад

You are so welcome

@ob5006 Год назад

Thank you so much with your instructions I fixed the extension cord.... By myself

@AmplifyDIY Год назад

Great job!

@jonf7659 Год назад

These videos are great--thanks! What if I have the opposite problem--cord damage close to the appliance? I guess I could always open it up and see if there are similar terminals to secure the wires to....

@AmplifyDIY Год назад

Yeah, if you have damage close to the appliance, I'd disassemble the appliance and see how the power cord is connected inside. It's likely you'll be able to simply cut the cord just past the damaged area, remove the short part that is connected tot he appliance with the damage, and re-connect the cord however it was previously attached. I've done this with a skill saw, and it still works great today. Thanks for watching!

@jonf7659 Год назад

@@AmplifyDIY Sounds good; I'll give that a shot. Thanks again!

@Jan-kw7cz 2 месяца назад

Thanks so much for making a scary DIY entirely reasonable.

@MarkChristopherpens Год назад

Good b'y. Just finished watching the Canada USA World Jr semi final. How u guys doing? Still b coming home tomorrow?

@dfudge007ca 7 месяцев назад

Thanks for this video. The one question I didn't get answered it around amps. I have an extension cord that is rated at 13 amps. Is it safe to replace the male end with a 15 amp plug? I ask because I can't find a 13 amp replacement plug. Thanks in advance!

@AmplifyDIY 7 месяцев назад

Yes, I think you'll be fine using a 15A end on a 13A cord. Just remember that the cord is the limiting factor on any load you attach. Good luck!

@artriumph 3 месяца назад

Great video. I have heavy duty extension cord that needs a new male end. The wire that goes to the ground is actually pink not green. Is that unusual? Thank you.

@AmplifyDIY 3 месяца назад

Manufacturers use all kinds of colors internally. Just make sure it really is going where you expect, and ignore the colors. Good luck!

@pisces8160 Год назад

Very well presented! You're an excellent teacher!!!

@AmplifyDIY Год назад

Thank you! 😃

@middlecrossranch3977 2 года назад

Are there any extension cord ends that are look good after they’re on your cord, like the factory ones?

@AmplifyDIY 2 года назад

Hi Midle Cross - there are some that are less bulky. In my area both Home Depot and Lowes have some. Here is one on Amazon as well (affiliate link): amzn.to/3xm82cf

@echt114 5 месяцев назад

Will this completely solve the issue with connectors that are getting too hot? I notice some of the 15 amp connectors are bigger than others, do you need the big ones or will the smaller ones do just as well?

@AmplifyDIY 5 месяцев назад

As long as it is rated for the load, it should be fine. if something is getting too hot, then consider upgrading to a higher-amperage circuit and use an extension cord rated for a higher load.

@echt114 5 месяцев назад

@@AmplifyDIY Thanks for the reply. I've had extension cords that ARE rated for the load (1500 watts, continuous use) that do just fine at that level and stay cold, but another cord with same specifications will get hot at the connector. I've been told that it's all about how the plastic is molded onto it and that it's somehow leaking or meeting resistance. Theoretically, it seems these new connectors would solve it, but I didn't know about the plastic inside them and whether it mattered how big it was etc.

@LUISDURAN-ny6ot 7 месяцев назад

👍 👌

@joshuasmith1215 6 месяцев назад

I always feel like when I tighten the clamshell style onto the cord I'm cutting through it. Makes me nervous. You don't do any special tricks when looping stranded wire around a screw?

@AmplifyDIY 6 месяцев назад

No special tricks other than make sure to loop it in the direction the screw will tighten (clockwise). I've never had a clamshell cut through the insulation. Thanks for watching!

@Marlin101084 2 года назад

While I do like the method of cord storage, I only usednit a few times before being annoyednby it. It's cumbersome for something that isn't being pulled out frequently, or for any cord 50+ ft in length. I have subscribed to the method I learned to coil audio cables in a Tech Theater class in high school 20 years ago. One normal loop, then underhand twist with the next loop. Alternate with each loop. You can take the finished coiled cord, toss the whole thing out or pull just part of it, no twists in the cord. I do this with every type of cord over 15-20 feet now, maybe even shorter if I'm making a small diameter coil like with ethernet cables. I wish I had an example vid to link. There is another great method for really long cables that are used frequently, modeled after how parachutes lines are bundled after a jump. Ends up looking like a figure-8, and is very quick and more compact than the method shown here, also.

@AmplifyDIY 2 года назад

Hi Marlin - I use the method of one normal, one underhand when I store things like larger garden hoses, air hoses, etc. Since I rarely pull out an extension cord like this, I like the method I showed so I can just throw them in a pile into a storage tub, or hang them all from a hook in the garage and nothing ever tangles up. Thanks for watching, and for the tips!

@Marlin101084 2 года назад

@@AmplifyDIY I would agree, throwing multiple cords in a bin like this can be useful. Coils can prevent other cords from occupying the central space, and this method should avoid most tangles even with a hasty toss and being stuffed into a bin. It is definitely worlds better than many ways we see, like wrapping around the hand and elbow! I normally don't store too much together that way, but when I have a handful of smaller diameter cables together in my work bag, the coils make them easier to dofferentiate.

@luckylaura4821 Год назад

why didnt you do the black 3 prong - it is VERY difficult to get all the wires (since there are 3) arranged so the "closing" screw engages. That's what I wanted to see.

@AmplifyDIY Год назад

Hi Laura - apologies that I did not show the specific situation you are facing. I hope you were able to get your cord repaired.

@leohorishny9561 11 месяцев назад

I appreciate your instruction, but when you replaced the 3 prong male end plug, you inserted the ground and neutral wires in the left side of the plate, but the hot wire you inserted it in the right side; after your pointing out in the prior plug it is important to place the wire so that it's partly secured with rotation of the screw, I expected to see that followed with the other plug attachment screws.🤔

@AmplifyDIY 11 месяцев назад

Ah, you must be referring to around the 11:15 mark of the video, right? Notice that those connectors are actually a clamping style: the conductor does not wrap around (or even really touch) the barrel of the screw; rather, there is a plate that the screw clamps down on the wire to sandwich the conductor between it and a backing plate. On this style, it does not matter which side of the screw the conductor enters the clamping plate. Good eye for detail, and thanks for watching!

@lasskinn474 2 года назад

The plugs on the shelf are marked up like 4x plus from asia it seems(even compared to similar store in asia. And yea usa style plugs too)

@AmplifyDIY 2 года назад

Some plugs here are quite expensive. Cheap ones are just a few bucks though... but yeah, local economies, different currencies, etc... stuff is usually more expensive here than in Asia.

@lasskinn474 2 года назад

@@AmplifyDIY the few bucks is the 4x. Depends how many you buy here or where from though. The electronics shop near me in thailand has them yellow plus rubber ones in dozens under a buck. Crusty hard plastic two pins 30 cents or so. Same shop has arduino and esp stuff on the shelf too along with ac control boards and a components desk etc. It's pretty sweet.

@dm1445 Год назад

So is that safe to do to a surge protector plug?

@AmplifyDIY Год назад

Hi DM - yes, it's fine. Thanks for watching!

@bettinashope9637 4 месяца назад

❤❤❤❤

@user-yn1ko1ch3b 4 месяца назад

I find when daisy chain stitching cords , they're always kinky when in use .

@AmplifyDIY 4 месяца назад

Mine do that a little in cold weather, but not in the summer. Depends on the temperature as well as the type of material used in the cord construction. Thanks for watching!

@misterlift2637 2 года назад

Can you replace a plug end that is rated for 10 amps with a 15 amp plug end?

@AmplifyDIY 2 года назад

Hi Mister Lift - yes, you can replace a plug that is rated for more amps. Just don't replace it with one that is rated for less. Great question!

@misterlift2637 2 года назад

@@AmplifyDIY thank you!

@rogeramadon4064 Год назад

Great video - You would make a good teacher! What if you have a 3 wire (flat) extension cord, but they have no colored wires wrapping them and they are all the same?

@AmplifyDIY Год назад

Hi Roger - are there any colors wrapping the individual wires *inside* the insulation? If you strip off the outer jacket of insulation, do you find any colors at all? If not, sounds like you need to perform a "continuity test" with the cord, to determine exactly which of the 3 conductors connects to which of the 3 prongs of the cord - i.e., which is hot, neutral, and ground. If you have a simple multi-tester, you can easily perform a continuity test. I don't have a video on exactly how to do this, but I'm sure there are tons. Just search for "how to perform a continuity test" for instructions. Good luck!

@rogeramadon4064 Год назад

@@AmplifyDIY No - the 3 wires on the extension cord that I was replacing the male end plug had NO colors wrapping the individual wires. I did perform a continuity test, and STILL got the 3 wires mixed up. Thank God I have a good tester that I can plug into it which informed me I had the "hot" and "neutral" wires reversed. I switched them over and good to go - Up and running again. Thanks again for you informative video and guidance!

@williamthomas8135 Год назад

@@AmplifyDIY I do not see any inner colored sheathing. Does that mean polarity doesn't matter for this florescent light?

@mikebennett9270 5 месяцев назад

Go Blues!

@AmplifyDIY 5 месяцев назад

Honk. HONK. **HONK!!!!**

@Umansky2 2 года назад

👍

@johnrkd7960 Год назад

I have a cord that has 2 grey wires 1 black - never seen this please help

@AmplifyDIY Год назад

Hi John - the black is probably ground, the 2 grey are probably the hot and neutral for the A/C... but it's really anyone's guess which is actually which with non-standard wiring colors like that. You really should do a continuity test between the poles of the good end of your cord and each conductor to determine exactly which conductor matches up with which part of the plug. You'll need at least a cheap little multimeter to do a continuity test. Good luck!

@johnrkd7960 Год назад

@@AmplifyDIY thanks

@user-gv6iv2rx7u 10 месяцев назад

😮

@robertjoseph1592 2 года назад

A square head (Robertson) or ECX screwdriver works better on these types of screws. Most 11 in 1 screwdrivers will have one or both of those tips and can be had for around $10.

@AmplifyDIY 2 года назад

Great tip - thank you!

@Lenbo1977 Год назад

awesome presentation...but i could help to realize that on the second repair u cut off a damage female end then put a male end in its place....lol

@AmplifyDIY Год назад

Heh. The risks of cutting a bunch of different takes together in a video. :-) When I was finished, I had a correctly assembled cord with *both* ends replace, one female, one male... but while producing the video, I did cut off both ends and install new replacements multiple times to get the right takes / usable video. Thanks for watching!

@cjgrills Год назад

is there any danger of purchasing a female end that will not fit in your tool?

@AmplifyDIY Год назад

I'm not sure I understand your question....

@adolffpptv7094 11 месяцев назад

What Happens when you have 3 conductors which includes 1 blue and two black

@ZheKing 6 месяцев назад

Some of those ends are more than a whole new extension cord it seems

@AmplifyDIY 6 месяцев назад

It really depends. A high-quality end replacement may cost nearly the same as a super low-quality (and short) extension cord... I'd rather have the higher quality (i.e., can safely handle higher loads) solution. Thanks for watching!

@crazykittenvideos855 2 года назад

I enjoyed the video but UK plugs are much better than the US ones. The plugs cannot drop out of wall sockets or even get pulled out by the cable. The earth pin is longer and opens guards in front of the live and neutral ensuring no child can poke anything into it. If you haven’t visited the UK, the plugs are great but the weather isn’t! Love the channel 😃

@AmplifyDIY 2 года назад

I've seen several folks on RU-vid (@ElectroBoom comes to mind) who have done a fantastic job explaining why UK plugs really are far superior... and I agree. But you gotta play the hand you are dealt, right? Your umbrellas are likely far better than ours as well. ;-) Thanks for watching!

@Marlin101084 2 года назад

There are tamper-resistant (TR) outlets in the US that are required by code in most residential work now. I replaced about 30 outlets in my home with this design when my child started crawling. What you describe sounds similar, but these require both hot & neutral prongs to be inserted equally to have a set of shutters covering both openings slide past each other and allow the prong to enter. It prevents inserting an object into either of the slots individually (ground doesn't matter). (Poorly made ones from early designs made many people hate the idea, as the operation would bind and make it difficult to insert a plug. Newer ones are much better.) I'm curious how this compares to what you describe! Of course, this doesn't protect against cord becoming partially removed and objects contacting the expose prongs from the device plug. That is definitely a design advantage in favor of UK plugs.

@missmiller7829 Год назад

Holy sh*t.... did you see those prices!!!?

@AmplifyDIY Год назад

For a long time, it was cheaper to just replace stuff... but with the way the world has turned upside down over the last few years, it makes a LOT more sense to repair a lot of things that formerly would have been simply replaced. Thanks for watching!