Тёмный

How To Repair Cracked and Broken Motorcycle Fairings Pt 2 (Tutorial) 

How To With Kel
Подписаться 4,3 тыс.
Просмотров 14 тыс.
50% 1

Full step by step tutorial on How to Repair Cracked and Broken Motorcycle Fairings. Cracks, broken tabs using plastex bonding products. Part Two..
LINK below for all equipment used in this video.
Tools:
TACKlLife Rotary Grinder:
amzn.to/2HDSx8g
Plastex Repair Kit:
amzn.to/2YkJ0rv
Respirator:
amzn.to/30OWxJd
Body Filler:
amzn.to/2MeReQ5
Filler Application Blades:
amzn.to/2YSg1uC
Sanding Block:
amzn.to/2Wsr0xs
Wet and Dry Sandpaper:
amzn.to/2MaX6db
Air Blower:
amzn.to/2EBoV84
Dual Action Sander:
amzn.to/2WaiC6h
Dent Puller - Glue Gun Included:
amzn.to/2MbaPAH
Mixing Kit: Cups, Sticks, Filters:
amzn.to/2Wo55rh
Spray Guns: 1.8mm, 1.4mm, 1.0mm:
amzn.to/2WuA9FI
Mini Buff Polishing Pads:
amzn.to/2Qx8ajs
Cutting Compound:
amzn.to/2QuysTt
Machine Polish:
amzn.to/2YOP5Mv
Microfiber Clothes:
amzn.to/2WlsI3N
2K Primer:
amzn.to/2HFFtOd
2K Clear Coat:
amzn.to/2WuCTTw
Paint Reducer, Thinner:
amzn.to/2Mf7HDR
Wax and Grease Remover:
amzn.to/2HFP2gf
TACKlLife Rotary Grinder:
amzn.to/2HDSx8g
Plastex Repair Kit:
amzn.to/2YkJ0rv
Camera and gear used to shoot this video:
Camera:
Cannon M50
amzn.to/2EsgKdt
Over Head Camera:
Go pro HERO7 Black
amzn.to/2UyjxbW
Microphone:
Rode Video Pro R
amzn.to/2EHlRYC
Lighting:
Fovitec 20x28 softbox
amzn.to/2GYunVw
Tripod:
Benro slim / B&S head
amzn.to/2XxPYcA
This video was edited with Adobe Premiere Pro CC
www.adobe.com/
This description contains affiliate links. If you click on one of the links I will receive a small commission. These will help grow this channel and allow me to continue to make more content. Thank you for supporting the channel.
This Video:
In this video tutorial, I show you step by step how to repair broken or cracked motorcycle fairings and how to replace those broken tabs with tips and tricks on repairing those real difficult parts.

Авто/Мото

Опубликовано:

 

1 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 45   
@coppermine64
@coppermine64 4 года назад
Acrylic nail powder and Acetone. All it is. Been fixing motorcycle fairings for years. Even better than this is to create ABS glue (I use lego pieces in a jar, cover with Acetone and melt it down). Best fairing repair you can make. Great channel though.
@donksx
@donksx 4 года назад
Thanks for sharing that tip!
@Batti2323
@Batti2323 5 лет назад
Yes!!! I would love to see you document the process!
@howtowithkel3352
@howtowithkel3352 5 лет назад
I'll be starting it soon.
@riloforrealtho22250
@riloforrealtho22250 4 года назад
@@howtowithkel3352 I would love to see this as well I recently bought a bike with a few cracks in the plastics and its a starter bike and they don't make much for after market fairings for a Kawasaki ninja ex500d so I'm wondering a cheap solution to repair the plastic and maybe do a complete paint make over because im not in love with the yellow but I've never done any auto body or paint work so this is all super intriguing
@tomedelkowski6567
@tomedelkowski6567 Год назад
@@howtowithkel3352 did you start an document?
@stevengrande2364
@stevengrande2364 Год назад
What is the name of the product? On Amazon?
@tomedelkowski6567
@tomedelkowski6567 Год назад
@@stevengrande2364 Plastex Repair Kit - but you can use superglue and baking soda, that should work also, what i heared. i use an piece of broken fairing, remove all paint and cut it into small pieces. then add aceton in a glass, seal it and wait, the aceton dissolve the abs plastic and you get an good glue for repair. workes only with ABS! no PP or PET.
@americanwriter2533
@americanwriter2533 5 месяцев назад
🤩🇺🇸👍⚖️👁️👁️⚖️🇯🇵🏁🏁Great stuff! Will be restoring my 84 Gpz soon! Been mothballed since 94. Fairing was damaged in crash around 88. Original owner. Retirement "Mad Mac" trophy project. Wiseco 810 kit...Kehien CR 33 mm Specials...4 into 1 Vance & Hines exhaust! Flame spitter! Thanks for video! All the best!🏁🏁🏁🏁
@howtowithkel3352
@howtowithkel3352 5 месяцев назад
Nice ride :)
@TerrySmith-fo3qe
@TerrySmith-fo3qe 2 года назад
Yes..absolutely!!…I’m doing it to a wrecked superbike too
@garyryan1890
@garyryan1890 3 года назад
Nc 29 i have one looking to fix the fairings good work
@ross5490
@ross5490 4 года назад
I'm new too your channel great vid mate liked and subscribed
@howtowithkel3352
@howtowithkel3352 4 года назад
Thank you, If you have any questions just ask.
@christopherjohnson6056
@christopherjohnson6056 3 года назад
Yes yes 👍
@andrewkidd282
@andrewkidd282 5 лет назад
Video of the bike repair? Well "Yes" of course. Just making a track bike myself. Bought new farings and would also love to see tutorials on painting them. I'm a complete novice BTW.
@howtowithkel3352
@howtowithkel3352 5 лет назад
Hey Andrew, if you have any questions I'm here.
@andrewkidd282
@andrewkidd282 5 лет назад
Thanks Kel. You are very kind. I’ll let you know.
@riloforrealtho22250
@riloforrealtho22250 4 года назад
if you have any recommendations on a cheap way to repair and paint my fairings I would be all ears I love your content just scared to do it myself because im on a budget
@howtowithkel3352
@howtowithkel3352 4 года назад
Rick, how are you? Don't worry we have all been there. What we used to do before all these new products hit the market was to get a soldering iron and some staples or paper clips. Lay the staple or paper clip acroos the crack and heat it with the soldering iron. After in sinks into the plastic let it cool and use whatever glue we had around to seal the inside of the fairing. You need to put a staple ever 2 inches or so. This is quite strong after the glue dries. Then flip it over, fill, sand and paint the outside. Go for it...
@funstuff286
@funstuff286 5 лет назад
Great job 👍 do you paint the inside of the part when your finished???
@howtowithkel3352
@howtowithkel3352 5 лет назад
Yes, when all the repair work is done I clean it up and paint inside and out.
@robmuhfacka5986
@robmuhfacka5986 Год назад
Man I love your content, I'm a bathtub and countertop resurfacer, same basic concepts hvlp sprayers and such but I bought a motorcycle that has a lil bit of wear and needs a lil bit of love done to her ❤️ so now I'm here haha are you still active in this channel just in case there are any questions I have or tips you can give directly?
@howtowithkel3352
@howtowithkel3352 Год назад
Yes Rob, I'm here. Ask away if you need to.
@insydneytls
@insydneytls 4 года назад
you might find it easier, and more accurate, to apply the powder with a similar plastic bottle to the resin (you call it glue) with a slightly larger opening... thus avoiding the 'too much powder issue...
@oliwally
@oliwally 4 года назад
Hi Kel, just stumbled upon your videos and wow! So good. Thanks so much for sharing. I followed some of the links for the materials you buy and found that they lead to Amazon USA. How do you go about buying the 2 part primer & clear coat here in Oz? Thanks for your help, Oli.
@howtowithkel3352
@howtowithkel3352 4 года назад
Oli, how are ya mate? The products in the links are no longer available in Aus. This is what I am using right now. HICHEM 2K PRIMER FILLER GREY 1 LITRE 4:1. HICHEM 2PK PLATINUM MS CLEAR 1 LITRE 2:1. HiChem is available in most auto paint shops and is a great product. If you want to buy it online, you can get it from Variety Paints in Perth. Just copy and paste the capitals above. 3 day shipping Aus wide. I have use them a lot and have no complaints. If you need more help with anything, let me know. Kel
@oliwally
@oliwally 4 года назад
​@@howtowithkel3352 Thanks very much for the info Kel, very helpful. You're videos have me itching to do some spray painting although I have no real need to spray anything right now. And buying guns and paint just for the fun is a bit rich for me. How did you go about matching the colour of your blue Suzuki. Looks perfect! Mine is almost identical in colour (GSX1250FA) and I am having a hard time finding colour codes. Regards, Oli.
@howtowithkel3352
@howtowithkel3352 4 года назад
@@oliwally Hey mate, your paint code is YUF and the colour is Alba Blue Metalic. Its a solid colour so matching should be very close. I will be doing a video on how to match colours soon. Kel
@oliwally
@oliwally 4 года назад
@@howtowithkel3352 Fantastic! Thanks Kel. I've been chasing all over the internet for that but perhaps just didn't have the right approach or key words to get a constructive answer. How did you work this out? Is there a chart or website? Will very much be looking forward to your next video. Keep up the great work!
@howtowithkel3352
@howtowithkel3352 4 года назад
@@oliwally Mate try Colorrite on google. It's pretty good.
@polski1986
@polski1986 2 года назад
Too bad he started uploading.. great content
@OLKO-wv9hy
@OLKO-wv9hy 2 года назад
Hi. Would you please explain what type of glue you are using?
@howtowithkel3352
@howtowithkel3352 2 года назад
Hi, the product is called Plastex. It is available on amazon.
@alvin2894
@alvin2894 Год назад
Is this method better than using JB Weld?
@howtowithkel3352
@howtowithkel3352 Год назад
Hi, I think JB Weld is better for flat to flat, Plastex seems to handle edge to edge better. However they both do a great job.
@alvin2894
@alvin2894 Год назад
@@howtowithkel3352 thanks for the reply!
@keithorlando6652
@keithorlando6652 2 года назад
Will this work on Carbon Fiber fairings?
@howtowithkel3352
@howtowithkel3352 2 года назад
Hi, I have never tried a repair on carbon fibre. Let me try and I will get back in a day or so.
@keithorlando6652
@keithorlando6652 2 года назад
@@howtowithkel3352 awesome thank you so much! I have two carbon pieces that multiple tabs snapped off.
@howtowithkel3352
@howtowithkel3352 2 года назад
@@keithorlando6652 Hi, the product holds carbon fibre togetther very well. I tried black and clear powder. The clear I think is better because you can see the black powder and it would look a little ordinary if it were to be applied on an area that is very visible. Good luck.
@jamtheman7030
@jamtheman7030 3 года назад
haha...yeah man...where are the build vids!!
@broderp
@broderp 4 года назад
No disrespect intended, but it seems like you are just winging it with that product. Do the instructions say to apply that many layers at one time? or to over saturate the powder with glue which forces you to add more powder, then glue then powder etc...? I would think that a nice simple clean line would suffice for mot of these repairs if done properly. ??
@howtowithkel3352
@howtowithkel3352 4 года назад
Hi, how are you? Your criticism is welcome and you are correct. I am not an expert with this material I have just used it many times. I am a diy guy just like all the folks out there. I'm just sharing what I have learned over time. I respect your opinion and you are welcome to critique my stuff anytime. Thank you for your input. Kel
@timwegman5776
@timwegman5776 2 года назад
I sure hope you did document the rebuild people love watching rebuilds as I would and I can tell you if you did you wouldn't still only have 2k subscribers. Your videos are great but they are to much of a niche content if you want to grow and have a channel that earns an income then hell yeah you need to document and rebuild motorcycles I mean how has no body told you this yet, you seem to know what your doing as far as fix, build and repair and your ok with the camera so start building and stop these little quick fix videos unless you want to have only 2k for life or do both but for God sake do some big rebuild videos please you could be rolling in views.
Далее
How To Paint Motorcycle Fairings (Tutorial)
8:47
Просмотров 304 тыс.
How to Start a 2 Stroke Mower (Won't Start Tutorial)
8:23
Motorcycle Chain Facts You Don't Know - But Should
7:59
ABS plastic Motorcycle fairing repair.
11:03
Просмотров 6 тыс.
Лучшие АВТО за 4 МЛН
0:54
Просмотров 869 тыс.