Just the video I was looking for. I left a fender that had fresh epoxy primer on it outside that didn't have time to cure and it got rained on. The next morning it has rust spots on it. I had to completely sand it down to bare metal and use Eastwood Fast Etch to get rid of the surface rust. Working under a 10' x 10' Harbor Freight canope. Have a 10' x 10' cloth side wall on order from Temu to block out the late afternoon sun.
Excellent presentation! I've had a few problems that showed up years later and couldn't understand the cause. I've now realize the possible cause. Thanks Kandyman....
Very interesting video Kandy Man, great job on the trunk lid the match looked spot on to me and the finish is superb so as you said I recon the customer will take one look at it and want the rest of the car done😂 I've been painting in my little homemade booth for nearly 4 years now and I've never had any moisture problems, all I run is a big dropout filter then a good 3 stage but I never see any water in the first part of my 3 stage as it's all stopped by the dropout filter which is a fantastic bit of kit👌👍John UK
Great video! Have you ever used these etch wipes on small edge sections where you burned through the primer and then gone directly to sealer e.g. DAS3021? Thank you
Same process I use on the boats basically for bare metal just don’t buzz it down again after the wipe. That’s nice that the waterbased primer doesn’t wrinkle! How do you like uv primer?
I have a compressor with an auxiliary tank. Most of the water stays in the primary compressor. I still have water traps before the auxiliary tank and in-line water traps at every outlet.
Every person I know with a home shop has moisture problems. Most of them have never drained their compressor! They all think those little filters you put on the spray gun will stop all that water! SMH.
plenty of good videos on how to eliminate moisture from your home set up, if you're going to leave bare metal overnight cover it with plastic. strip and paint a deck lid, they're going to call the customer and see if he wants to do the spoiler, that is why kandyman makes more than you do, if you hear go ahead and do it i will take care of you and they dont, its time to move on. those .5 and .2s add up maybe 1000. or more a year. another informative video