How to Replace [1GR-FE] Water Pump 03 - 15 | 4.0L | Toyota Tacoma 4Runner Tundra FJ Cruiser Aisin

Подписаться 83 тыс.

Просмотров 58 тыс.

50% 1

In depth how to change the water pump on a 4.0L Toyota 1GR-FE V6 Engine. When you do this it's best to do radiator hoses, fan clutch, thermostat, drive belt, and idlers and tensioner idlers. AISIN takes pride in being the No. 1 Water Pump supplier to Japanese automobile manufactures. Utilizing the experience and knowledge gained throughout the years of cooperation directly with automotive manufacturers, AISIN is able to employ a technological advantage in manufacturing and supplying the best in quality and the most durable of products. With this momentum, AISIN is increasing the development, manufacturing and supply for European and American automobile manufacturers.
AISIN Water Pumps provide optimal cooling without creating excess load to the engine. AISIN's advanced aluminum die-casting technology allows for size and weight reductions without sacrificing cooling performance. The highest quality materials are used, creating stronger body design and resistance to corrosion. Advanced technological design produces smooth coolant flow channels, efficient rotors, ball bearings, and carbon ceramic mechanical sealing for optimum cooling performance and longevity.
‪@toyotausa‬
Water Pump: amzn.to/3wYF3ZC
Tensioner Pulley Kit: amzn.to/3hWKe8v
Coolant: amzn.to/3wXEsrk
Fan Clutch: amzn.to/3rqpKYA
Radiator Hoses:
Upper: amzn.to/3kFxqFc
Lower: amzn.to/3rsXrsG
Thermostat: amzn.to/3kLsIWA
TOOLS
Toyota FIPG: amzn.to/3zlUGw3
Zero Offset Wrench Set: amzn.to/3iwKKJg
3M Silcone Paste Dielectric Grease: amzn.to/3BED7JJ
Toyota Year, Make, and Models covered in this video:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
2007 FJ Cruiser
2008 FJ Cruiser
2009 FJ Cruiser
2005 Toyota Tundra
2006 Toyota Tundra
2007 Toyota Tundra
2008 Toyota Tundra
2009 Toyota Tundra
2010 Toyota Tundra
More About BundysGarage:
goo.gl/qv3Wzc
Questions, Comments, Concerns:
bundysgarage@gmail.com
Twitter:
/ bundysgarage
@bundysgarage
On The Web:
www.bundysgarage.com
Music by Randall Kent: As seen on NCIS
• Randall Kent - Going H...
All Rights Reserved 2021
© Copyright 2021
Bundys Garage
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part with out the express written permission. Contact: bundysgarage@gmail.com
DISCLAIMER - DISCLAIMER - DISCLAIMER
Due to factors beyond the control of BundysGarage, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. BundysGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. BundysGarage recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of BundysGarage, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the end user and not BundysGarage nor any of it’s subsidiaries.

Авто/Мото

Опубликовано:

21 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@jefferyturner517 3 года назад

Wow; bigger job than I was hoping. Intimidating somewhat for sure. Thanks for your time & instruction.

@Nwwoods 3 месяца назад

That cover is a timing chain inspection cover, seems like they always leak.. Thanks for the great video👍👍

@iantol8504 2 года назад

bro… i super appreciate your clear explanation… cool n calm narration … i learned a lot from this… pls make more 4runner repair videos… got a 2006 4runner… newbie diy here… thanks for making this instructional video…👊🏼👊🏼👊🏼

@bundysgarage 2 года назад

Thanks for watching. I have a video for the spark plugs and the timing chain tensioner inspection cover oil leak fix.

@Dogman82556 11 дней назад

Thanks for the video. Bigger project than I thought but ill watch this a couple more times and be good to go.

@CaseyChambliss Год назад

Thank you for showing how to replace the thermostat housing (held on with 5 bolts). This is the best video I've found that shows how to do it. Sucks that you have to remove the radiator fan and shroud to get to it, but now I know. Looking forward to trying this in my attempt to replace knock sensors.

@jims4877 Месяц назад

Found your video...saved it to WATCH LATER list as part of my pre-emptive strike list for this job. Thanks.

@sandyburs8394 Год назад

Hey mate...yep an Aussie here. Firstly thanks for your very informative RU-vid clip, it helped and gave me confidence to do the job myself. I have just removed the water pump from my Dad's '09 1grfe hilux that has done only 80,000k''s yep that's roughly only 50,000 miles, it was leaking fairly badly from the weep hole on the W/P. Yes I was surprised too but, 100% one owner and can confirm from factory it has RTF on the long bolts and a slight smear on W/P gasket. So will be doing the same on refit. All the best and keep up the good work. Thanks again mate 👍

@CRAFTSMANFISHING Год назад

That square metal whit 4 bolts where oil leaks is the tensioner for the timing chain.

@mallrat1960 Год назад

The RTV Sealent on the end of the 12mm bolts is factory applied. Not a bad idea to clean up and reapply with new pump.

@damonleeb 4 месяца назад

Great video 1a auto video makes it so much more complicated

@bundysgarage 4 месяца назад

Thanks that means a lots. Also A1 Parts or they call themselves LTQ now. They DO NOT have the best prices! They sell inferior parts at a high cost. If you want to buy quality parts (NGK, Aisin, Denso) for a great price check out rockauto.com

@albgonzalez6367 Год назад

Love this video primo. I built the confidence to do this job

@colinkeeney7187 2 года назад

Great video. Super helpful thanks for taking the time to make it!

@thihan Год назад

Your video will help me in the future. It was very helpful thank you!

@paulreichert7132 Год назад

Excellent video well done. Thanks much for the detailed explanation and tips for replacing the pump and tensioner components.

@bundysgarage Год назад

Glad it helped you out!

@randyhopkins952 2 года назад

Awesome! Thank you very much!

@pdxsquid 6 месяцев назад

Thanks sir, changed mine out with the help from this video. Also did the tensioner, that was a PITA.

@miniman101 4 месяца назад

next time, just change the idler, its a left hand thread btw. its alot easier than doing the whole bracket and such

@gregorymacneil2836 2 дня назад

I too would change out the belt pulleys. I would also clean the throttle body.

@chrislevengood7119 2 года назад

Thanks man! This was very helpful.

@bundysgarage 2 года назад

Hopenotnhelped you save money!

@themechanic8195 10 месяцев назад

Holy, thats alot of work im doing mine now as prevention

@rosibelrodriguez3364 2 года назад

Excellent ty👍

@chez9303 3 года назад

It’s an inspection cover for the timing chain.

@bundysgarage 3 года назад

Thanks

@alale923 2 года назад

Hey i thought i had a fan clutch issue on my 06 v6 4runner. At idle it really was making an ugly wobbling sound and was coming from the fan. Replaced the clutch and same noise. Took it off again and noticed my water pump pulley has the wobble. Not originating from my fan or clutch but reverberates through it at idle. Dont see any coolant leaks at all and im crazy abt leaks. Should i be worried abt driving at the moment? Would i have catastrophic failure if the pulley gives on me? Im abt to go buy another car and jus want to know if im ok to drive my runner.

@CaptainFALKEN 2 года назад

I've replaced the belt like 3 times already and before it gets to the shredded part where it quiets down, sounds like a million crickets chirping. Found out.. it's the water pump bearings making it unaligned and shredding. 2009

@deniseandmarkfirestine7443 Год назад

The little steel door is for the timeing chain tensioner inspection, I didn’t take my radiator shroud out to change my pump. Just drop the fan to the bottom and wrench away. Little tight but not too bad. Also, those 12mm bolts have rtv from factory. Anyway, good job. You have the timeing cover leak just like me. They’re not that bad but it is not worth it to me to fix the timing cover leak. I just keep an eye on it.

@nicholasjones7774 Год назад

Top comment for info. this is all true. also the timing cover leak is verrrry common which is why i like you use of "The" timing cover leak haha

@mendoblendo321 7 месяцев назад

Same. Very common issue on the 4.0. I wouldn't even bother wirh it

@AAT287 5 месяцев назад

@deniseandmarkfirestine7443 I’ve also got a timing cover leak but am just monitoring it. Is there a good way to clean the surrounding areas to get an idea of how much is leaking? I’ve ordered brake parts cleaner but am hearing that is not good to use on the engine.

@hasmatman50 Год назад

Great video. Did you replace the smaller hoses behind the thermostat housing? if so, do you have a link ? i can't seem to find them. thanks in advance.

@TheDesertRat31 2 года назад

I didn't see the link to the timing chain inspection cover. But I'll go through your videos

@automovement.official 3 года назад

Nice bro

@8825able1 Год назад

Did you mention the torque for the idle tensioners?

@danielturrentine2488 2 года назад

Thank you for your very helpful explanation of this patients zapping procedure. I am about to get stated. I am having problems getting all the hoses I want to change out all the hoses that come and go to and from the Thermostat housing/Water inlet housing. There are 7 different ones. I got the obvious ones: 2 to the radiator , 2 to the oil cooler, How do you identify the others. The parts houses are no help.

@bundysgarage 2 года назад

That would be a question for the Toyota Dealership

@rafaelaquino2872 2 года назад

Hi. When would be the cost to replace it.

@playstereo 2 года назад

Your oil leak comes from the timing chain cover.. all Tacomas tend to have that issue. You will have to reseal it to fix it.. It's a big job.. but for the looks of it you can do it.

@fishboy3179 Год назад

Better leave a nut on the clutch so when you bust it loose from the pump it doesnt land in the radiator

@richardstone5241 Год назад

I'm going to do this to mine this summer. Yes, I'm going to replace the tensioner and (all the rubber hoses associated) I think it's best to do so. After all, you're in to it this far why not? Then, should be good to go for another 100,000 miles.................right?

@mendoblendo321 7 месяцев назад

Yes

@miniman101 4 месяца назад

Was there anything else aside from the water pump gasket, and thermostat "triangle" gasket that you needed to change? im looking to do this and want to make sure i get all the parts i need ahead of time... also think that square cover is leaking on my engine, ill pull it off while im in there... was there much for leakage or did you figure out exactly what its for? thanks

@bundysgarage 4 месяца назад

Here is a video on the parts you need as well as a link to the parts on Amazon in the video description if you need them: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YjJSdOBbRPk.htmlsi=GEOvd4XMvrq2xbyC

@beast11135 3 месяца назад

So most of what you replaced Is only If you want to replace while down there already right? Because I'm doing a repair for my lotential future mother in law so she can save money and she can't afford the extra parts. The water pump is the only part that's leaking and Is bad.

@noevqz007 9 месяцев назад

Are those two hoses you have listed in the description from amazon the hose you are removing at time code 12:34 into your video?

@bundysgarage 9 месяцев назад

The ones in the description are the upper and lower radiator hoses. Check out this video that shows in details the parts used: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YjJSdOBbRPk.htmlfeature=shared

@noevqz007 9 месяцев назад

Thank you

@JoeVan 6 месяцев назад

So about the mileage, I'm just changing one that I bought new in 2005. 224K, water pump is just now starting to seep. As surprising as it may have been, that very well could have been the original you had in your hand

@bundysgarage 6 месяцев назад

They will last a long long time especially if you have an OE water pump and run the proper ratio of coolant. The worst thing you could do is run water in a cooling system. It rusts the engine from the inside out.

@oncemoreintothefray2766 10 месяцев назад

Timing cover

@timparker3272 2 года назад

When is it actually recommended by the manufacturer to replace the actual Tensioner itself?

@docsamson2299 2 года назад

My truck is an '09 with just over 200k on it. I had my mechanic put a new tensioner in after I changed my belt and idler pulleys because the holding tab snapped off. I assumed it was on it's way to failure but my mechanic said it was still in good condition. Wish he'd mentioned that BEFORE doing the job! As long as your belt isn't slipping or chirping, I think it's fine and doesn't have a specific replacement recommendation...

@shottashabazz6721 Год назад

How long do water pumps last? I have a 2014 4Runner I got from a dealership a few years back with 68,000 miles on it. I have 81,000 miles on it now. I have had it over 4 years but I don’t drive it much. Where I stay every place I need to go is a few minutes away including my job which is two minutes max driving distance.

@bundysgarage Год назад

Your water pump will last forever as long as it’s an original water pump from Toyota and not an aftermarket one someone installed before you got the truck.

@shottashabazz6721 Год назад

Thanks for responding Chief. You got a new subscriber.

@bundysgarage Год назад

Thanks for subscribing Champ

@8825able1 Год назад

designed to last 100,000 miles or so.

@Winslow273 8 месяцев назад

My 2008 4Runner has 351,000 original miles and counting. Still has the original WP. I do SLLC (Pink) coolant changes every 100K miles. Your coollant looked like LLC (Red).

@johnkalpooner08 2 года назад

Bolts call for sealant

@bundysgarage 2 года назад

Why?

@venturafredis 2 года назад

How many hours take you to done this job

@bundysgarage 2 года назад

It took me about 4 hours but if this is your first time doing all this work, give yourself 6 - 8 hours.

@venturafredis 2 года назад

@@bundysgarage Thank you I have a 2005 4Runner V-8

@rosibelrodriguez3364 2 года назад

Juuu huh good question a list 6H.

@The_Touring_Jedi 2 года назад

@@bundysgarage 6-8 hours jesus...I thought max 2.5-3h work... I mean I know that there is no need to remove the whole thermostat housing and that Toyo has a lot's of screw down there...but still is sounds a lot 6-8h. Any torque specs on water pump? Thanks

@The_Touring_Jedi 2 года назад

@@bundysgarage Oh I just saw torque specs...great video anyway. I have a Land Cruiser 120 with 1gr-fe engine. Everything under the hood is 1/1 with other models of Toyo. Thanks a lot👍👏👏👏

@nxtgen2b416 5 месяцев назад

Whats rtv??

@bundysgarage 5 месяцев назад

RTV Room Temperature Vulcanizing. Here is a link to the best stuff I have found for any make car or truck, motorcycle, boat, etc: amzn.to/3zlUGw3

@SlickDiecast 10 месяцев назад

😅 plastic “blaud”. You sounded like Dacrula for sure!

@skuuubasteve14 Год назад

Not from toyota. But I'd tighten and torque middle out. You iron it out

@dalebusta1542 Год назад

I think I can ...

@jeepchievous 2 года назад

Noobe tah papitas.

@bartholomewterbinstein6235 2 года назад

You should have discontinued your battery before taking off your fan, could have lost your hand mate

@bundysgarage 2 года назад

I knew where the key was and no was going to start the vehicle and that fan is not going to start spinning on it's own. So I felt safe no disconnecting the battery, but if you feel that's what you need to do, then do it.

@mallrat1960 Год назад

Fan is not electric will not start unless you start the motor.

@bundysgarage Год назад

Right!