how to replace a clutch master cylinder on any car or truck 

Love the no such thing as a dumb question when your learning, wish all people were like you fella.

Lmao "that should slide right out". "Mmmhhhhhmmmhmmm" i cracked up.

Great explanation! Thanks for the help, saved me about $300!

Good job. You were really clear in explaining step by step . I like how you broke every thing down that it made perfect sense. Kudos keep up the good videos👍.

I enjoyed the video.made it clear and understandable

Cheers legend, saved me a couple of bucks for sure. Great vid brother.

I believe you did a very good job of explaining this process. I also believe that I can follow your guidance in order to replace the master clutch cylinder on my Toyota pickup. My only concern is that the line that runs from the master clutch cylinder to the slave cylinder will also have to be replaced. Thank you.

thanks for doing this tutorial, I found it helpful. one thing grated on me. Don't use standard open ended spanners on brake lines. get a Flare Nut Spanner Set, or brake line spanner set. they are wider ring spanners with a slot cut out to fit over the brake line. yes, I've been there with burred over nuts on brake lines. the small spend on brake line spanner set will be money well spent.

Good job thank you.

Great video, congratulations and thanks a lot for teaching all of us! I realised I got a problem trying to shift gear when I start up my car. I don't think I have some trouble with my clutch pedal, I can push it down like was always, middle hard, I have proper amount of brake fluid at container. I have no idea what to do to try solve it.

Very helpful... Thanks bro 🤝

Sir. May America bless you

Thanks good video

Helpful

You're a legend

Great video! One question, when you did the bench bleed, what was your procedure to close it up when you were done?

You the best Jabo once again saving my ass 😅

Thankyou bro

I've had problems with my clutch master cylinder ever since I bought the truck. It has been replaced by a mechanic multiple times. Is it possible that the master cylinder continues to fail due to insufficient bleeding of the system? If it's not that, do you know of other reasons why a master cylinder should keep failing after a couple of years' driving?

Great.

Good video, I need to replace my clutch vacuum booster on my old Nissan. Do you have a video that can help me out?

Hey Jabo, I have a question. My 91 Nissan pathfinder has one bleed valve in the engine compartment, and then another down by the slave cylinder. Do I need to bleed the engine compartment one first and then the lower slave valve? Or should I just leave the engine compartment one closed and bleed from the slave bleed valve below?

Does it apply for Ranault trucks

On an 03lancer does the u shaped pin clip have to be removed before you can pull the clutch master cylinder through the firewall

Hey I know this video has a couple of years but I had a question. I have a Nissan patrol with a clutch booster does this method that ur showing going to work for me as well ?

Do I have to change anything of clutch like clutch disc/pad anything of that sort if my clutch cylinder is screwed up?

Great info thanks fam....

Great video. I have a question, though. I followed your video step by step for pulling master cylinder out. The thing looks fine except for super old oil sludge since I neglected this for a while. It was almost empty too. Two questions: (1) Is it possible the pedal failed because I did not have oil at MIN level? (2) If I cleaned it out with WD40 or Simple Green, will any remaining of those products interact badly with the new oil? Thanks in advance.

Fastest way gravity bleed with clutch up get a steady string now close a slave cylinder bleeder ..Next push the clutch down with the stick n hold Open bleader and push the slave cylinder piston all the way closed clothes and bleeder You should now have pressure...Only works on sachs slave....

How do u bench bleed a master cylinder without taking out the slave?

So I have a Chevy s10, and where you put your brake fluid is where my clutch fluid goes so idk man

I'm about to install a clutch master cylinder for my 2001 Ford Escape (4 cylinder). The only difference I can see so far is that my master cylinder feeds from the brake master cylinder. How different will that process be compared to what you've shown? Great video by the way!

I have a 1990 Chevy Cheyenne 3500 and I had to take the starter out then clutch not working what do I do?

92. Nissan. Truck. Pickup. 4 cly ! Two. Wheel. Drive. !

My clutch wont disengage fully, I noticed when I depress the clutch pedal the fluid in my resevouir lowers and when I release the pedal it raises again, does this mean my clutch master cylinder is bad?

hey when i pump mine it doesnt build pressure

just checking, would this work on a 94 ranger?

What is the fair price for a job like this?

Have same truck 1994....shifts perfect one day but ok the next........I just leave the master threaed fork on inside the truck and spin the rod...

I didn’t bleed the clutch master cylinder and I have already bleed it through the small nut 10 times but it’s still not building pressure

When bleeding you're pumping the clutch pedal not the brake, correct?

I got a sticky clutch.Can this cause it or do I need a new clutch

where’s the bleeder valve? i gotta replace mine tomorrow morning

i put everything new on 97 honda acord n no cluch at all

I've got the same truck I've changed the master and slave cylinder over a dozen times nothing works..... But of course I never went to the dealer😢😢😢😢😢😢.. Just autozone O'Reilly's in advance auto every single 1 of their parts leaks doesn't hold pressure

my clutch won’t go into gear and did a lot of bleeding

Dirtyfluid over n over rubber hose melting...flare leaks....parker flare seals

zafira clucth master cylinder

How much would you charge someone for you doing the job

What are the reason for a master cilnder change

But I wouldn’t say “how to change any clutch master cylinder.” If I had a Nissan I’d be good to go though

Not sure if i was watching a clutch video or a video about youtube ads

Um, what is a clutch? Are those the button thingies on the steering wheel that make the transmission shift? Is that what is called autostick system? I knew some one that had an autostick car. I think the clutch cylinder was going bad because he drove it like a regular car with no pushing the buttons on the steering wheel. Maybe she took out the clutch and let it drive like an ordinary car.

And mines is shitty and plastic, I should of figured that from an American made truck

duralast leaks😂😂😂😢😢😢😢😢😢😢😢😢😢😢😢😢

Hey I know this video has a couple of years but I had a question. I have a Nissan patrol with a clutch booster does this method that ur showing going to work for me as well ?