How To Replace A Water Heater Temp/Pressure Relief Valve

Подписаться 936 тыс.

Просмотров 411 тыс.

50% 1

If you want to help support Shannon to produce more videos like this, visit www.house-improvements.com/do...
Go to www.house-improvements.com for help. Shannon shows you how to replace the temperature & pressure relief valve on a typical residential water heater.
If you have questions about your home improvement or maintenance projects, stop by the forum on our website, where Shannon will answer your questions in detail for free.
Website: www.house-improvements.com
Facebook: / 180657245288627
Twitter: / house_improve
Video © 2015 SKS Media. Videos produced by SKS Media (House-Improvements.com) are provided for informational purposes only. The information contained in the videos is intended to give general guidance to simplify DIY (do it yourself) projects. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, SKS Media cannot and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, SKS Media will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional. SKS Media conducts all matters in accordance with the laws of Saskatchewan, Canada.

Хобби

Опубликовано:

19 мар 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 233

@nerdlove1071 2 года назад

My boyfriend just found this video, sent me a link to it and said, "I love this guy's energy. I feel better already. I want to give this guy a hug." He's down in the basement trying to fix the leak as we speak. Thanks for posting this. You're a good egg.

@matteliasmusic 3 года назад

saved my life this morning, valve was leaking like crazy and i just opened and closed the valve manually, and it sealed up properly again after that. thanks for this, 5 years later!

@dontbanmebrodontbanme5403 Год назад

I would tell anyone, however, to buy the relief valve anyway. I did and today, I finally couldn't get the leak to stop after tapping it and playing with the handle, watched this video and 20 minutes later, was back in business! I tell every homeowner that there are things you should have on hand, because it's not a matter of if things are going to fail, but when

@kenesto 5 лет назад

My sincere appreciation for your great how-to video Shannon! I never had an inkling of what to do with a Water Heater beyond lighting the pilot (even so guided by instructions labeled on the side).I had the trouble of an outdated TCP valve that finally had chronic leak problems so needed a replacement.Just your video alone showed me all I needed to do for the job !You make it easy,concise and straight to the point! You must have saved me a heap of cash to do it without a professional.Thank you so much for your upload---you are verg good!!!

@deniseporter6544 7 лет назад

Thanks Shannon!!! After watching a couple of your videos I was able to stop the leak without any cost---As opposed to having my unit replaced at about $800. Thanks again for your expertise that gave me the courage to trouble shoot my leak.

@HouseImprovements 7 лет назад

great!

@everestdelgado5442 Год назад

This guy is a joke ..empty 4gallos or 10if not empty the whole thing 👀

@mmsebulba 9 лет назад

Great video! Had water on the floor this morning, watched this video and released the pressure. Problem solved!

@leonardhoosier7016 3 года назад

Definitely helped!! I actually found out my pressure relief valve was bad when the water heater would only give hot water when I flipped and held on the relief valve!! Thanks a lot!

@royrose5877 5 лет назад

Just changed my very first pressure relief valve thanks to your video. Thanks!

@AsherMandrake 2 года назад

Thank you for this video. A label on the tank said to have a professional replace it, but I knew it couldn't be too difficult. You cleared up the mystery of replacing the valve!

@HouseImprovements 2 года назад

You can do it!

@ds99 9 лет назад

Another good lesson on home improvements. Thank you Shannon.

@T3chGuy007 4 года назад

This video is very informative and it helped me get the T&P valve changed on my water heater. Keep up the good work!

@capnjan9835 5 лет назад

Love your videos - glad I found you again. I have been fighting a T&P valve (been there for 9 years), and am now reduced to trying penetrating oil. With hope it will come out. Oh heck, even if I 'break something', that T&P has been leaking and either needs to be replaced or a new water heater needs to go in. Send me some good wishes!!

@DavidStrchld 11 месяцев назад

How did it work out (4 years into it)?

@JodyWarrick 7 лет назад

Thank you so much. Made the mistake of touching that damn release valve while trying to relight the pilot. Tried to open and close it to get it to stop leaking and it opened full and wouldn't turn off...yep.. needs replacing. Your video was spot on. Thanks!

@chanthadeth 5 лет назад

Thank you so much. I followed you step by step and finished it.

@Bob-TheTechGuy 6 лет назад

Thought this was very simple but always like to watch a pro do it first to make sure. Thanks for the video. :)

@toshatrollwarrior 6 лет назад

Thanks for posting these and helping ladies out!! 💪🏻

@AllAccess1992 6 лет назад

Thanks for taking the time to post this and help us that just don't know how to do these repairs. Followed your instruction and all is good now with my hot water heater. Many Thanks!!!

@davidgiles5030 5 лет назад

Good job. I feel confident to do this job and save myself some money. Thank you.

@mikemead2315 5 лет назад

Good job! Very complete and concise! Perfect mix.

@lauramartin9197 6 лет назад

Thank you so much for this video! Thought we had a big issue but released the pressure and it's all good to go!

@abubokor7123 3 года назад

য যদি জন্য ওকে ধরে জিজ্ঞাসা জৈবিক

@MrThinblueline 8 лет назад

TPR valve for my tank was 15 bucks from Home Depot. A little bit of my own labor saving a lot of money. Thanks for the tip!

@HouseImprovements 8 лет назад

+MrThinblueline Thats what we like to hear DIY

@dominickdeflorio193 9 лет назад

Always great videos Shannon. Thank you!

@fsguy78 6 лет назад

Great video!!! Good job explaining, demonstrating, etc. Very clear and to the point! Canadians are so nice!!! Thank you!!!

@kevinshah6425 6 лет назад

Great video! Thanks Shannon! .My water heater valve was leaking; I never opened this valve since last 12 years. I opened and closed the valve few times and problem solved.

@levicarter890 Год назад

Did you turn it off first?

@glennpickett7822 6 лет назад

Good video. But it would be useful to mention that the water heater won't drain through the bottom drain if air is not allowed to enter the tank. So open a hot water faucet nearby, or open the T and P valve. Thanks.

@dontbanmebrodontbanme5403 Год назад

Funny, I just replaced my valve (within the last 1/2 hour) and when I opened my bottom drain, a trickle came out, then nothing. I immediately realized that air needed to get into the system, but couldn't figure out how. Somehow (I don't know how), after about a minute or so, it started draining on its own. Two 5 gallon buckets later, I shut the valve closed, replaced the valve without a problem (teflon tape and pipe dope, people!), turned the water back on and everything went 1,000% perfectly, just like the video. AS I WAS WALKING AWAY, I said to myself, you know, opening a hot water faucet would have probably done what I needed! 😂😂😂

@lickablelisel 4 года назад

Thank you for your simple but very informative video. I will keep you in mind for my next project.

@Darrenbrown09 5 лет назад

Thank you for walking me threw this good sir.

@williamgeorgelopezjunior8533 3 года назад

Thanks for specifying 10 gallons because most people would probably assume they need to drain the whole thing

@leefrost1254 8 лет назад

Excellent video, thanks for saving the day.

@nursekrista2011 4 года назад

Thank you so much for helping me diagnose my problem and fix it myself saving much needed $$$. I learned so much and appreciate your help

@brmelectric 6 лет назад

Great explanation mines dripping I will change tomorrow. Thanks.

@TAmNGUYEN-wp9um 6 лет назад

Thank you for sharing brother. Now I know how to replace a water heater TP valve

@Honeybee-ur2hz 6 лет назад

Thank you Shannon for sharing, on Sunday 12/10 my son and I flash water heater tank just find out relief valve dripping today, we didn't replace it, I had a felling I need to turn on Pressure Relief Valve and turn off opposite direction and the dripping stop.

@hbuttsjr 8 лет назад

Excellent video!! I am on my way to home depot to get a new PRV. Thanks for being so thorough!

@HouseImprovements 8 лет назад

+Harold Butts Good luck.

@supersamschwartz 5 лет назад

Thanks Shannon! You are a life saver! Subscribing now

@maedrosbott5274 3 года назад

Thanks man, much appreciated, it was helpful. Simplicity is the greatest cunning.

@floridaboy1700 8 лет назад

Life Saver! This was perfect!

@alx2300 9 лет назад

Thank you very much for this video!

@kevo7878 5 лет назад

Thank you so much for saving me money!

@timfruend1276 5 лет назад

Thanks for the info. I opened the relief valve and it stopped leaking. Thanks again for the info.

@reganfletcher2094 7 лет назад

just wanted to say thank you for this video. I had no idea I was supposed to release the pressure once/year let alone once/month. I watched your video in the first place because I assumed I was going to have to replace the PT valve and wanted to save money by doing it myself, but after watching it I tried just relieving the pressure and within a minute or two the dripping stopped. Thank you!

@HouseImprovements 7 лет назад

great

@clydebarker8321 6 лет назад

Regan Fletcher it will be back. It dripping is a symptom of a serious issue such as too high temperature and building excess pressure over 150 psi... this video doesn't go into depth of the causes of opening. Never cap it off for one..never. if your water is very hot turn it down to a safe setting about 120 degrees. Most water companies install one way check valves at the meter creating a closed system and when your water is heated by the heater it expands and can push the valve open. The valve hasn't failed. You would need a thermal expansion tank at the wh. The gas control valve could also be bad and heating above 210 degrees . Just flipping the lever won't correct the issue I'm sure. 35 yrs experience service plumber contractor.

@geoffrundlett1697 8 месяцев назад

Thanks as always Shannon! Love your videos!

@Celtics_617 9 лет назад

I never knew what that valve did until now. I'm gonna start to open my valve to the water heater every month.

@bkbug6416 4 года назад

My plumber says don't do that because it wears out the spring inside then you'll have more problems.

@squirrelattackspidy 2 месяца назад

Thanks for letting me know it's okay to use pipe dope / threat pipe sealant. It was one of the questions I had.

@mcafton 7 лет назад

Thanks for the video. it helped a lot. my valve works, but is leaky. took it apart and there was no tape or anything on it. so cleaned it out and put it back on and we are about to see if it works.

@z-man2343 Год назад

Just finished replacing the PRV on our Bradford-White tank after watching this video. Couldn't have been easier, thanks! Oh yeah, and it only cost me $18.99 (plus tax).

@HouseImprovements Год назад

Nice work!

@llg7456 3 года назад

Great video! Simple and short!

@jahr4c1 2 месяца назад

Great video. This just helped me replace my pressure relief valve for the first time. Thank you!

@danawilson2771 7 лет назад

Hey, Shannon ... Thanks for a good, clear explanation. I'm cleaning an Atwood heater on our RV and simply needed to know if it was safe to put a pipe wrench on the PT valve. I wouldn't dare put a 2-foot pipe wrench on it though but apparently Mr. Bailey got away with it. ;-) Keep up the good work.

@HouseImprovements 7 лет назад

Thanks

@brianpeelle8016 4 года назад

Greatly appreciate this tutorial. Followed the steps exactly, having to use some Liquid Wrench to loosen the pipes, but it all worked great! I fixed the problem for about $15. Thank you so much!

@mrjohnknott 8 лет назад

Thanks legend ! Well presented

@willmiles100 8 лет назад

Great video. It helped me fix my hot water tank problem -thanks.

@HouseImprovements 8 лет назад

+Will Crawley perfect

@denisdeblois6790 2 года назад

Great video. Very useful as always. Thanks!

@phoso1 3 года назад

The best teacher on RU-vid.

@peterfallnbigl3582 4 года назад

Very well done..good presentation skills...thanx

@BufordPusser582 2 года назад

Great informative vid. Thank you for taking the time to post!

@theoneals4569 3 года назад

Shannon appreciate it man I just installed it and thank you

@debbieryzebol3059 5 лет назад

Thanks for the info, it is a great help!! Ben

@SheepHunter9780 6 лет назад

Great video very informative

@moore3james3 4 года назад

Thanks for this tutorial. Made me feel like a fake plumber. Worked like a charm

@doripoulin884 6 лет назад

Thank you for posting your help on changing a pressure valve! Appears to be simple. From mobile hairdresser : New Images By Dori.

@kc0ptv 3 года назад

Thanks, you answered my concern!!

@geojor 9 лет назад

good info, thanks...

@neilwilliams8608 6 лет назад

Do you have a video showing the pipes disconnection to the release valve. Awesome video. Thanks a lot.

@ricardovaldez4658 Год назад

Seeing this makes me wish I went with my gut and changed it myself

@jeffulsh2020 2 года назад

Awesome man, thank you 🙏🏼

@jeffreyboyle628 7 лет назад

Thank you

@toneg.4111 4 года назад

Thanks for your help !👍

@HouseImprovements 4 года назад

Any time!

@dontbanmebrodontbanme5403 Год назад

Just the information I needed! My relief valve was leaking and no matter how much I tapped on it and flipped the valve handle, it wouldn't stop. I bought two different style replacement valves, because I had no idea which one was right (I didn't feel like leaving the house without hot water while I uninstalled it and ran to Home Depot) and thank God, one of them was perfect. It couldn't have gone easier. I should actually do this once a year, because when I did so, the first gallon or so that came out was a disgusting rust/mud mix and I've heard that draining out your tank once a year can help get the crap out. Thanks for the information.

@danielwilson9593 2 года назад

Very helpful in 2022!

@Rover0010 6 лет назад

Shannon, great video, should the ceramic center be solid or floppy? Mine only leaks about 8-12 oz after heat up, so I pulled valve and the center rod just flops around, does that indicate it is broken? Thanks

@ngbay160 2 года назад

Very helpful video!! Thanks. I was in panic mode until i found this video

@victorperatero4587 8 лет назад

great video!!thank you

@HouseImprovements 8 лет назад

+Victor Peratero you're welcome, Victor.

@damonblankenship9450 Год назад

works for me !!! Saved me $$$$$

@eagl0215 2 года назад

Thank you sir!

@pdeboer1987 2 года назад

Thanks, I did it!

@jarrodbritt2887 Год назад

Thank you!

@mikemead2315 5 лет назад

Can shut off the hot water side too, or if someone turns on a hot water faucet, it will allow water in the hot water pipes to drain back into the hot water tank, and drain out the hole while fixing - a unexpected face full of water is always surprising ;-)

@flguyindc 7 лет назад

Thanks for the helpful video Shannon. I know you mention it in the video, but Is it really necessary to turn off the gas ignitor when swapping out the valve? I'm trying to avoid turning off something that might not come back on. Thanks!

@HouseImprovements 7 лет назад

I would recommend it but you may be able to leave it on pilot instead?

@MrWheresmykeys 4 года назад

Now.I will do it monthly after I replace it. Thanks

@morkarmorgan3161 2 года назад

Thanks Good Info

@CookiePepper Год назад

I do check once or twice a year.

@greknar2 8 лет назад

Thank you so much I saved couple of hundred dollars :)

@HouseImprovements 8 лет назад

you're welcome Giri.

@rhoodj Год назад

Contrary at most of mu AO smith system, P&T my pressure relief valve is located on top of my tank.

@MyKonaRC 4 года назад

Oh wow, thought my big channel locks were big enough. Looks like I need a pipe wrench for more torque!

@bernardomolina2913 3 года назад

Thank you sooooo much

@dizleran9276 7 лет назад

I started doing plumbing a couple months ago .. I learned the lesson not to touch anything thats been in water or holds water unless its already damage and needs replacement .

@HouseImprovements 7 лет назад

fair enough. don't fix if not broken??

@dizleran9276 7 лет назад

well right . . out of curiosity I touched the pressure release valve on my moms water heater just because and it hasn't stop leaking till this day . I guess I should replace it my self if the land lord don't send some one out soon

@HouseImprovements 7 лет назад

If they have not been used often then they tend to jamb up with crud.

@mattpkp 6 лет назад

Yeah its always better to have a bomb in your basement that may kill a family member then operate a valve once a year.

@scp234 8 лет назад

Does anyone know what the black soot like stuff is above the valve? I have this too.

@gabrielegiuffre 3 года назад

thank you so much .... now i can work on mine :-)

@treblarefils 7 лет назад

I just want to comment and say for people who may be wondering my valve had been leaking for a few days i was going to replace it but i figured id open and run it and close it a few times. My valve had never been opened ever in 5 years. I opened it and closed it a few times bunch of rusty water came out i ran it till it was clear also seemed it had some air in as well. Well it doesn't leak anymore after just operating it a few times thankfully lol

@HouseImprovements 7 лет назад

Thanks.

@dizleran9276 7 лет назад

maybe I need to do that .. mine keeps leaking after I pulled it open from not touching it in 2 years

@johnenriquez7044 5 лет назад

Minus4Plus6 I did the same to mine and it has been dripping for over 2 hours. How long after you operated again did it stop leaking ?

@Brendalo1 4 года назад

Good information, direct to the point thank you, the job seems pretty straight forward.can you buy that relief valve, over the counter? a nice break from some videos wheredude thinks its his big break, & you have to listen to Monty Hall for 20 minutes to get 5 minutes worth of info Thanks again Jeff

@jn4806 3 года назад

Thanks

@dap5790 7 лет назад

I replaced one today. It came with Teflon tape on the threads, and the guy at Lowes said to add more tape to it if need be. No pipe dope needed.

@westvalley411 Год назад

My new rheem pressure valve on side of gas heater arrived in box with valve overturned so not direct line to base.. can I move back counterclockwise 1/4 turn?

@bgrady24 4 года назад

Just bought a new income property and noticed this was leaking on one of the units...I’ll add this to my arsenal of things I can do!

@ToddMiley89 4 года назад

My 3 year old water heater started dripping occasionally from the tpr valve. A Plummer said I needed an expansion tank. My old water heater lasted years without one of those. I just purchased a new valve at the hardware store and he said that I dont really need a tank either, that even newer valves can go bad.

@HouseImprovements 4 года назад

They can go bad, even newer ones but many times it is a sign of needing an expansion tank.

@michaelharless1658 5 лет назад

So you shouldn't use Teflon tape on that connection? I'm anew diyer

@blancavega4565 5 лет назад

Hi Shannon, A brand new 50 gallon water heater was installed a day ago. A day later the water pressure in the restrooms sinks and shower is slow and the water is lukewarm. I text the installer and he says it might be the new water heater but he's not sure what to do.

@johnrohrs7608 2 года назад

Thanku

@plancktime6859 7 лет назад

I have this ringing hissing sound coming from my water heater. When I turned off the pilot and flame the sound stopped, I tried to turn it back on and the pilot will not light, the 4 or 5 small pipes leading to the water heater have caulk sealant stuff coming off. The pipes attached to the main gas pipe coming into the house. Is the problem that I need to reseal with better caulk sealant on those pipes, will the pilot then light and be fine after that? Is it like the water heater will not light if there is a leak, if so how would the water heater know its leaking is it because of the pressure coming from the pipes is to low? Could the pilot orifice be clogged also? Thank you so much you guys that do these how to videos on RU-vid helped me and other people many times

@HouseImprovements 7 лет назад

Your gas heater will not know if there is a leak. Have a pro come have a look before you continue!!!!!