How to Replace an Axle U Joint / Jeep Wrangler JK

Подписаться 62 тыс.

Просмотров 90 тыс.

50% 1

ACDelco 45U0104 Professional Front Axle Shaft U-Jointamzn.to/3oM9kHp
Heavy Duty Ball Joint Press & U Joint Removal Tool amzn.to/37YciSJ
Milwaukee Electric Tools 2557-20 M12 Fuel 3/8" RATCHETamzn.to/2ElUxQS
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing.*
This Song was Downloaded Here www.epidemicsound.com/referra...
Royalty Free Music Provided By Epidemicsound
Video Recorded With
4k Hd Camera Panasonic g7 amzn.to/2CQ9h9M
4k Hd Vlog Camera Sony RX100 Vii amzn.to/2Hv1oHe
1080p Action Camera Hero 7 Black amzn.to/33g0PJz
EDUTIGE ETM-001 Microphone amzn.to/2OV9P2V
MagiDeal Black Fur Microphone Windscreen amzn.to/2s5tpQY
Rode VideoMicro Compact On-Camera Microphone amzn.to/2ronlmD
COOSA USB-C Power Bank 5000mAh Portable Charger and Wall Charger amzn.to/2qTypI3
USB C to USB C Cable 6FT amzn.to/31Tdguj
Canon PowerShot G7X Mark III Screen Protector amzn.to/2MRo8EL
Filter Adapter amzn.to/2pozneX
Triple Cold Shoe Mount Gimbal Extension Bracket
amzn.to/2pmqySH
Manfrotto PIXI Mini Tripod amzn.to/2pWz3nAThanks
Thanks For Watching and Please Subscribe ru-vid.com_c...
Facebook: / thelatemodeltech
InstaGram: / thelatemodeltech2.0
Pinterest: / thelatemodeltech
Twitter: / late_tech
________________________
DISCLAIMER
Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!
As an Amazon Associate I earn from qualifying purchases.
(paid link)
For sponsorship, product reviews, and collaboration, you can email me here:thelatemodeltech@gmail.com
________________________
#TheLateModelTech #jeep #wrangler

Авто/Мото

Опубликовано:

10 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 111

@marioramirez3014 18 дней назад

Bro, thank you for the step-by-step on the video and the quality of it and not skipping all around. Appreciate the hard work and the time I took to create this 👍

@Donnythelatemodeltech 18 дней назад

Thanks for the great comment brother!

@naamangeist7843 2 года назад

It's NEVER as easy as it looks on RU-vid! My 07 took me 4 hours per axle. These midwestern winters rust everything under your vehicle, making maintenance a nightmare.

@marieturnquist2003 Год назад

Exactly!! Looks so nice being to pull a hub bearing out and be able to re-use it. Corroded aluminum or rusty metal, bearings get destroyed trying to remove them. Cold chisel is your best friend at that point

@takingu2skoo462 Год назад

Good job good video unlike most with no lighting to see what the heck there doing

@craigtrompeter1922 3 года назад

Can't thank you enough! Great easy to follow instructions!

@windowcreek1798 2 года назад

GREAT VIDEO. SO EASY TO DO WITH THE RIGHT TOOLS. AWESOME.

@Cumbernauld1963 2 года назад

You saved me a ton of money on labor..thank you

@quigley6674 Год назад

Good overall how-to video. Just a point about the re-assembly, if the U-joint is tight upon assembly, it is usually because the caps are both pressed inward too much. If not corrected, it could lead to premature wear and failure of the U-joint. You just need to push the cross outward in each direction and ensure it's freely moving.

@Zachs6710 Год назад

Agreed, i was always told to give the yoke a couple firm wacks with a hammer so the ears can return to proper position as they are likely inward slightly from having the cups pressed in.

@robertveldman1901 Год назад

I was thinking the same. I always gave the yokes a wack or two to loosen them up. If you rotate the axle in your hands, the end shaft should easily flop around based on it's own weight.

@kevinlange7319 5 месяцев назад

I have replaced mine recently and developed a high pitched chirp in my 2015 JK while moving.

@jeeplord4067 2 года назад

Look how fast he took off that rotor. Amazing

@billjones7841 3 года назад

Awesome tutorial!

@NomadicKing Год назад

Thank you for giving socket sizes as you go.

@Donnythelatemodeltech Год назад

🍻

@afroman652 3 года назад

Great video !!! Very well done 👍🏼

@PLAYitLOUD78 9 месяцев назад

Love the sound effects. Great video. Thanks! 🎉

@Donnythelatemodeltech 9 месяцев назад

Most appreciated!

@jesseflores7790 Год назад

Thanks for the video. Appreciate your time!

@JB-bb1zw 2 года назад

You can do this job with out taking off the wheel bearing from the axle, its just a lil more cumbersome... when reassembling i use copper never seize on everything, that said if your gonna seat both cups at the same time you couldve just flipped it over and used the vise, (thats what the shop man says) i personally prefer to seat the caps one at a time,, i put one cap on, hold the u joint in place over drive the cap, then put the C clip on, then i slide the u joint to the other side and put the other cap on and then back drive it til i can get the last clip on . Some times ill even add a lil extra grease to make sure the needles stay put..

@Donnythelatemodeltech 2 года назад

@flyandfishwithfraser 10 месяцев назад

Thanks bud great video done deal on my 2010 140k

@gregbisesi9966 3 года назад

Good video. I used the BFH and deep well socket method to replace the driver side joint a year ago on my 09 Jk. I had just finished ......lol after 4 days of replacing ball joints ( thinking that’s what was marking the front end squirrely) so I repulled the shaft changed the bad u-joint. I should have changed the passenger side too, but had a severe lack of enthusiasm and that joint was still good. When I had my Yukon locker put in by a local shop they changed out the stock u joints with cheap ass Chinese joints. Got 50k on drivers and a bit over 60k on the passenger. I used a higher quality Spicer joint last time. Parts store didn’t have it in stock so using a Moog this time. Bought a ball joint press like yours for the ball joints, probably hammer the old ones out and press the new one in. Thanks for the video.

@Donnythelatemodeltech 3 года назад

🤙

@LevelUpMechanics 3 года назад

Great repair! Good info...

@brandonbonaccorso7235 Год назад

Thanks for the great video

@pierrepoitras1798 Год назад

Great video thank you😊

@hpiproceed97pcp20 2 года назад

Thanks bro !!!! Imma do this with my tj

@danedgar5132 2 месяца назад

Great video! Very helpful. Thanks . Unfortunately I have to do both.

@MrEddie2885 3 года назад

escelente trabajo

@Donnythelatemodeltech 3 года назад

👍😀

@steveheathcock6843 2 года назад

Thanks man, this helps a lot. Great vid..

@Donnythelatemodeltech 2 года назад

Thanks for sharing!

@LeeParks 24 дня назад

Great video. Thanks!

@Donnythelatemodeltech 23 дня назад

You're welcome!

@AT-yo9er 3 года назад

Nice video!

@davidibarra7854 2 года назад

Dam. You made that look so easy.

@mikebednarek8705 5 месяцев назад

ONE thing that this and another very good video did not do - EXTRA grease to the Needle bearings- Differential, Axles and Drivelines book recommends adding grease here - makes sense.

@Donnythelatemodeltech 5 месяцев назад

Thanks for the info!

@jeremyware8377 3 года назад

Dang Carmax need a mechanic like you!

@mag5482000 3 года назад

thank you sooooooooo much

@bentaylor9817 Год назад

Only thing you forgot to do was at the end when you finished one side of that ujoint was tight. Funny trick to do is literally hit the sides right under the caps with a hammer and the entire thing will loosen uo

@richtyler1353 2 года назад

Excellent video but if it’s stiff after you get done like it seemed o the one side you did just gently wack it a couple times and it lines everything back up correctly and it will turn freely. If you don’t it will wear out a lot faster

@JJBanuelos 3 года назад

Not going to lie the glove at end of the shaft was freaking me out 👀 Great Video

@Donnythelatemodeltech 3 года назад

🧤

@gregsousa7382 10 месяцев назад

Thanks for the useful info. I would recommend some safety glasses for next time.

@joerouth6255 10 месяцев назад

From my understanding it’s easy enough to covert axle shaft to accept full retaining clip instead of oem retaining clip (which falls out on occasion). Grinder and cut off blade is all that’s needed to mod shaft.

@pahick54 3 года назад

Great vid. Excellent camera work. Spend more on your parts, though.

@BrewCityRider 2 года назад

You make it look pretty easy. It would take me 2 days to do this job haha! That includes fighting all the stuck fasteners. I can't believe some people actually do this "on the trail." Not sure how that is possible. Anyway, I was just here to understand the job more after getting a quote from a local shop to do the job on my '07 JK, which sounded very high to me. $104 parts and $330 labor. I told them not to do it, and now I have to find a more reasonable shop to do it.

@AndreysLife 2 года назад

Lol that for sure. Last time I tried to take it apart the joints were so stuck inside that only way was cut it apart. Cause tried even on a press and they didn’t want to move.

@Anschutz270 Год назад

I had a drive shaft ujoint on my Dodge that was so bad that we tried to push it out with the outrigger on an M984 Wrecker (~55k lbs) and all it did was crack the cap and lift the truck up.

@poorshab Год назад

Here in the great white north of Michigan use a two arm puller to remove the assembly instead of beating on it!!

@takingu2skoo462 Год назад

What I needed to know more then ever is how you put the ring on it and stick it back in

@208miuwu 2 года назад

Damn 210K miles 😳

@spudeleven5124 2 года назад

There was a huge trust factor toward the end that the caps wouldn't drop off and scatter needle bearings everywhere.... :-O

@bluesriot2 Год назад

thanks man great vid great camera work and lighting and editing . i pulled the axles on my 96 gcl after spotting the movement inside the u joint caps , most of the needles were gone. not having a bj press i decided to drop them at a driveline shop and for around 225 i had new spicer joints , he quoted 200 but said they were really a bitch , i believed him lol they'd been there over 25 years . ball joint press from harbor freight looks like it's high on my list of tools to acquire . thanks also for mentioning socket sizes , always helpful fo sho ! liked and subbed ciao4now peaceout jj from nj

@Donnythelatemodeltech Год назад

Thanks Joe for sharing! Comments like this just make my day. Thanks again!

@josephcamacho6588 2 года назад

If ujoints on frontaxcel shaft are warn out shaft could that cause front end to shake at about 40 mph apond loud mean drivibelity?

@josephcamacho6588 2 года назад

Would the jeep shake hard if front axceil shaft at 40mph?

@pahick54 3 года назад

Spend more for a quality spider and get a grease fitting.

@Baileybear85 2 месяца назад

Im having major issues with my ujoint job, I have a 2012 Jeep Wrangler sport JK. I go on any auto parts store website, put in my vin, and shown a selection of everything that SHOULD fit. I pickup some Spicer 5-153x joints with the intention of replacing both fronts as a day job. Fought with the damn joint for 4 hours with success, but the brand new joints are significantly smaller than the bore. This is a time sensitive issue and i really need this fixed by tonight. Any help/advice is more than appreciated.

@MrFivepointfivesix 3 года назад

Great video pretty straightforward using common tools just curious was that a Milwaukee M18 it sounded like it cuz I have the same thing that's definitely a lifesaver to getting off big bolts nuts, and I also have a brand new ball joint press that never used it's good to know I can use it for that as well, mine is pretty loose but not like yours , it's a 2011 Jeep Wrangler jku ,I think when I change mine out I'm going to do both sides cuz I'm running Nitto 37$ and I'm going to get greaseable fittings, thanks for the very helpful and useful info keep up the good work and keep up the videos thank you

@Donnythelatemodeltech 3 года назад

Yep ,m18 is great. And the ball joint press , you can use it on all kinds of parts and in all kinds of places.. Great tool. Thanks for sharing !👍

@mrpeanut7099 Год назад

21mm socket 36mm 12mm 12 point Ratchet Dead blow hammer Hammer and chisel

@randyscripter6205 Год назад

Great video! Just wondering about that center hub nut. Is there a torque spec or procedure for reassembly?

@Donnythelatemodeltech Год назад

There is a Torque spec for everything. I just hit it with the impact.

@troypurnell7479 19 дней назад

Would it be better to replace the whole shaft?

@Anschutz270 Год назад

Doing this today. I ship my Jeep from Alaska on the 9th and it chose to start clicking.

@truthjustice4089 3 года назад

Invest in impact sockets,, nice video

@Donnythelatemodeltech 3 года назад

My 500$ 1/2 inch socket set works fine for home use.

@jorgeortiz2131 3 года назад

hello the end of the axle does not want to enter can you help me

@elgastsos210 10 месяцев назад

Think this could be my issue. Just curious could you actually feel the u joints were bad while driving? Got a little quick back and forth play in my jk steering wheel. It's driving me nuts??????

@Donnythelatemodeltech 10 месяцев назад

I could just hear it.

@slowep3chep722 Год назад

Damn bro, make it look way to easy

@Donnythelatemodeltech Год назад

Got that EP3? Honda boy?

@bobl8687 3 года назад

Awesome video! Just curious... how much would a shop charge for a job like this? (just change both U joints)

@Donnythelatemodeltech 3 года назад

Around 3 hours, at what ever the shop rate is

@shawneastman9225 4 месяца назад

I was just quoted $1100 for one shaft at the local JEEP dealer.

@jayak3768 6 месяцев назад

It would be better if jeep comes up with whole axle replacement instead.

@jasonstorie8740 Год назад

If an axle retainer is still in the axle housing how do you get it out

@Donnythelatemodeltech Год назад

Coat hanger

@coachwhitford7315 3 года назад

If u-joint is stiff after installation just give one med-light sharp blow behind the cup at the yoke. Gotta love CHINA!

@vedranjerkovic2951 Год назад

What were the symptoms did the front end vibrate after it failed?

@Donnythelatemodeltech Год назад

Just noise

@frankiebe4818 2 года назад

Hi question here. So its okay to hammer(metal hammer?) the axle(axle nut) to separate hub from axle Great vid btw tnx

@Donnythelatemodeltech 2 года назад

Be " careful"

@kidgenius43 2 года назад

When I did this job, I backed the wheel hub bolts about a half inch out, put a sacrificial socket on them, and beat ‘em with a hammer till it was knocked loose.

@WilliamVG Год назад

Btw, new Jeep wrangler owner here, 2019 JL Sport S. I have a clicking sound when 4wh is engaged,only when the wheel is turned. This is most likely a bad U- joint?

@Donnythelatemodeltech Год назад

Possibly

@MafiaHitmanX4 3 года назад

Did it squeak when you would drive ?

@Donnythelatemodeltech 3 года назад

Yep

@82ndsniper1 2 года назад

The 36 mm bolt has reversed threads ?

@Donnythelatemodeltech 2 года назад

Nope

@queensapphire7717 3 месяца назад

None of these guys ever have a frozen bolt.

@danhambrick6331 3 года назад

Do you still have your XJ?

@Donnythelatemodeltech 3 года назад

Stay tuned.......

@tchandler187 3 года назад

How long did this take you?

@Donnythelatemodeltech 3 года назад

Hour.

@tchandler187 3 года назад

@@Donnythelatemodeltech Thanks, gonna try this weekend

@cliftonlindsey5747 3 года назад

The clips are suppose to be installed with the round towards the axle and hub shafts. If you notice on the yokes, there is a machined recess. This is to help center the u-joint and assure proper preload on the bearings. You're welcome. But, I have over forty years experience working on everything from Automobiles to Zenith televisions and everything that starts with every other letter of the alphabet in-between.

@Donnythelatemodeltech 3 года назад

Strange comment . Thanks , I guess.

@cliftonlindsey5747 3 года назад

@@Donnythelatemodeltech How is technical advice on proper u-joint installation a "strange comment"? What's strange is: you making a video on how to do something the wrong way and have no clue of what I'm talking about. But, the next time you replace any u-joint with C clip retainers, you'll see what I'm referring to.

@Donnythelatemodeltech 3 года назад

Thanks Cliff, it would be very helpful if you could watch more of my videos and give me some more wonderful advice. I am working very had to a good job and experience would be very very helpful. Thank you again for your time. 🥠

@ufcsportswear Год назад

how much does a mechanic actually charge for a job like this?

@robheddrick8829 Год назад

About $500 total for 3 hours labor and $125 in parts. Could be more depending on the quality of parts you use.

@Roadking556 3 года назад

Ha ha ha no rust, My 13 mm hub fasteners were so rusted out there wasn't even threads left on the ends. The hub had to be chiseled off. The universal clips were part of the yoke and had to be cut off. Had to press them out with a 20 ton press. Which ended up bending the yoke. New parts yoke and spline, hub bolts, universal joint. This Job was absolutely miserable. If you live anywhere the State spray the roadway with a deicer even on nice days to deplete thier stock for funds. Just buy a new vehicle.

@jonbonson6030 Год назад

Unless it’s a regreasable U-joint, it’s a waste of time.

@1991tommygun 3 года назад

I dont bother with the balljoint press, just cut the old joint with a torch/grinder and tap the caps thru with a socket and hammer

@calebsurpass Год назад

How long would the grease last? I usually regrease every 5k miles but the axle ujoints I have are non-greasable. Was wondering how long they last or is it a take it off then regrease every so often 🥲

@Donnythelatemodeltech Год назад

I haven’t greased these since this … probably gone around 80k on them.