Learn how to replace the impeller or water pump on your #Mercury four stroke outboard motor. Capt. Orlando of Nomad Fishing Charters takes you the process step by step.
At the 1:57 mark you are taking out the bolt that holds the annode plate on. Can you tell me what size socket to use? That bolt is way down a chamber and it would be very helpful to know what socket I'm trying to attach to it. Thank you!!!!
Shouldn’t matter as long as both the shifter and lower unit are in the same position. Sometimes the rod on the lower unit moves out of place and it becomes a bit of a PIA. If that happens and they don’t align, you’ll have to check their positions again. Good Luck, Capt. O
I believe that was a rubber seal that fits over the shaft and rests on the housing. Also applied some grease to the bolts to keep them from seizing up. Good Luck, Capt. O
@@CaptOrlandoMuniz thank you, switched it out today .. also replaced a broken speedometer while in there which the piece broke in side and had to reverse tap it out .. also had prop engaged in Forward so when I put it all together and fired it up the prop only spun ion one direction . so pulled it down and lifted the gear spindle and twisted it, that put it in Neutral pushed it back up and that was it .. thanks again.