This Old House general contractor Tom Silva helps a homeowner install a new pair of basement bulkhead doors. (See below for a shopping list and tools.)
SUBSCRIBE to This Old House: bit.ly/Subscrib...
Shopping List for How to Replace Basement Bulkhead Doors:
Steel bulkhead door [amzn.to/2mS7uu5]
Fast-setting grout [amzn.to/2nti8aR], for filling voids in foundation walls
Pressure-treated lumber [amzn.to/2m38rj3], to make new sills
3 inch decking screws [amzn.to/2n1oga1], for attaching sills to house framing
3 inch masonry screws [amzn.to/2mZxNOS], for attaching sills to foundation
Self-stick membrane [amzn.to/2nzEMyz], applied to pressure-treated lumber
Metal spray primer [amzn.to/2lrNT3E], for protecting fresh cut ends of metal parts
Silicone sealant [amzn.to/2m0Dkog], to seal flashing
Exterior-grade oil-based paint [amzn.to/2lniuPP], to serve as a topcoat finish
Tools List for How to Replace Basement Bulkhead Doors:
Right-angle grinder [amzn.to/2mV18Ku] with a cutoff wheel [amzn.to/2m0ZsyZ], to cut through old door hinges
Flat bar [amzn.to/2nr23m2], for prying
1/2-inch drill [amzn.to/2mSflaY] with mixing paddle [amzn.to/2nxNTzM], to mix grout
Two 5 gallon buckets [amzn.to/2lRrXiI], one for mixing grout, one to hold water
3 inch paintbrush [amzn.to/2m4MKzh], used to wet concrete prior to grouting
Pointed brick trowel [amzn.to/2m1rYR2], for smoothing grout
Circular saw [amzn.to/2mVSZWe], to cut lumber
Layout square [amzn.to/2lnevCK], for making square crosscuts in lumber
Cordless drill [amzn.to/2mSflaY
Hammer drill [amzn.to/2m0OI3u], to drive in masonry screws
Utility knife [amzn.to/2mWQ0gc], for cutting self-stick membrane
Caulk gun [amzn.to/2lm6C0j], to dispense silicone sealant
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldH...
Twitter: bit.ly/ThisOldH...
bit.ly/AskTOHTw...
Pinterest: bit.ly/ThisOldH...
Instagram: bit.ly/ThisOldH...
bit.ly/AskTOHIG
Tumblr: bit.ly/ThisOldH...
How to Replace Basement Bulkhead Doors | Ask This Old House
/ thisoldhouse
13 сен 2024