Buy Now!
New Control Arm from 1AAuto.com 1aau.to/ia/MGSMX00042
This video shows you how to install a control arm on your 2005-2007 Ford 500. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
This process should be similar on the following vehicles:
2005 Ford Five Hundred
2006 Ford Five Hundred
2007 Ford Five Hundred
Tools you will need:
• Pry Bar 1aau.to/oSe/1AXAA00020
• 10mm Wrench 1aau.to/oUE/1AXAA00010
• 21mm wrench
• 15mm Socket 1aau.to/obqF/1AXAA00015
• 18mm Socket 1aau.to/oaeU/1AXAA00043
• 19mm Socket 1aau.to/oaeU/1AXAA00043
• Dead Blow Hammer 1aau.to/oSU/1AXAA00091
• 1/2 Inch Ratchet 1aau.to/oaeU/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/oa69/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obqF/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oaBF/1AXAA00044
• 3/8 Inch Wrench
• Gloves 1aau.to/oZs/1AXSS00048
• Liquid Thread Locker
• Safety Glasses 1aau.to/oSB/1AXAA00343
• Floor Jack 1aau.to/o3a/1AXAA00068
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
5 июн 2023
