How To Replace Front Axle 04-08 Ford F150

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,5 млн

Просмотров 140 тыс.

50% 1

Buy Now!
New CV Axle Shaft from 1AAuto.com 1aau.to/ia/1AAC...
1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to 04, 05, 06, 07, 08, Ford F150
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oIu/1AX...
• Pry Bar 1aau.to/odp/1AX...
• 18mm Wrench
• 21mm wrench
• 12mm 12-Point Socket
• 13mm Socket 1aau.to/oCd/1AX...
• 21mm Socket 1aau.to/oin/1AX...
• 8mm Socket 1aau.to/oxX/1AX...
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/oJc/1AX...
• Torque Wrench 1aau.to/okA/1AX...
• Assistant
• Floor Jack 1aau.to/oiY/1AX...
• Hammer 1aau.to/ofm/1AX...
• Jack Stands 1aau.to/oiX/1AX...
For More Info visit us at 1aau.to/h/ah9/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@austinnewman6834 Год назад

Best tutorial I ever seen

@juanriverany 3 месяца назад

I just replaced the driver side in my truck, just by watching this video! Thanks a lot

@JuanMartinez-t8f Год назад

Just let you know you guys are really good keep some way with all details torque. And tricks and all information you guys are great

@youdontknowmyname6956 3 года назад

Im completely removing my rack to replace it and I'm doing the cv axle n hub at the same time. Do you think I'll still have to pull off the upper control arm?

@leobizahalonie4001 Год назад

Thank you, good video

@arturocena377 5 месяцев назад

Thanks You for You video this help me alot

@tija99g.23 2 года назад

Great video ,, Thank You do I need to get the Front end realigned If I only replaced the Passenger front side CV Axle & wheel Hub Assy ?

@CMichaelLyle 9 месяцев назад

I have a question. My ring and pinion is trash. Can I remove my axles and drive the truck without any issues?

@liaqatbutt5407 3 года назад

How you replace front differential seal on 2004 Ford F-150 fx4

@JoeSmith-jr5ek 7 лет назад

WOW, I just picked up a ford F150 and thought I would see what replacing the CV's would take. Compared to the old 1993 Isuzu I had, this is a much easier job! The Isuzu was 10 hours of work, this looks to be 2 to 3 hours.

@yadirabella1 Год назад

The cv axle can fit right or left side ?

@francisbrun5970 4 месяца назад

How much does this usually cost at a shop

@stevecronin4258 3 года назад

Do I need to replace hub if my cv axle broke

@locknload9143 2 года назад

Did you? Mine axle just went. Waiting ona tow. Thanks

@tija99g.23 2 года назад

@@locknload9143 don't tow just Jack it up and replace CV axle and Wheel Hub assy right thier , $800 bucks at Service Shop ,, under $250 to $300 including buying the list of tools if you don't have them Al I neede was to gwt A 21MM AND A 12 MM 12PT SOCKET

@jiwbink Год назад

OK STOOPIT QUESTION TIME, UPPER CONTROL BALL JOINT WAS SPINNING SO I MELTED THE INSERT.... I CANT FIND THE 21MM NUT,ANYWHERE (W/O BALL JOINT,MINE IS MADE TO CONTROL ARE,SO IM LOOKIN AT A HUNDRED DOLLAR NUT! CAN THE NUT BE USED W/O THE INSERT??

@wiggylab1957 2 года назад

Is the default position on the hubs engage locked without vacuum does the vacuum make it Freewheel unlock ?

@adifferentpointofview1404 2 года назад

How long does this job take from start to finish?

@Lancair007 6 месяцев назад

It's called a steering knuckle. You also failed to mention the stub shaft going into wheel bearing must be correctly aligned.

@adifferentpointofview1404 2 года назад

How long does this job take from start to finish?

@bennie1304 2 года назад

Awesome video per usual but one thing the lug nut torque should be 150. Just remember the joke my shop tech used to tell me

@black67mgb 5 лет назад

You do not have to take off all the ball joints, just take off lower shock and it will come right out the back, just did it so easy

@1AAuto 5 лет назад

Thank you for watching our video! +Hollowof Hishand

@grrsanjose 5 лет назад

its just as easy taking out tha ball joint

@williamkay6916 3 года назад

YOU FAILED TO MENTION THAT THE STRUT WOULD BE UNDER A LOAD IN TRYING TO DO IT THIS WAY

@Omar.Al-Ali 4 года назад

Dose the same procedure applies to the 14-20 trucks?

@1AAuto 4 года назад

+omar 224 This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c

@GoldVP... Год назад

You don't need to remove tie rod, or upper control arm. Just remove suspension, and drop the cv out the back

@xboxgod1601 4 года назад

Thanks fore helping me

@locknload9143 2 года назад

Those are 2 different sizes!? Last time I replaced one, it litterly broke into 2 pieces because the parts store guy told me it was the same. I'll be taking my parts in for now on.

@benwentzell4350 7 лет назад

This does not require an alignment afterwards correct?

@1AAuto 7 лет назад

+Ben Wentzell You may want to get one done

@danwilliams1616 8 месяцев назад

And that's how I would do it

@matthewcruz6932 4 года назад

It’s not an exact fit at all. Not ONLY THE VIDEO CLEARLY SHOWS that they are completely (different) size (length). Also I’ve follow this video it cost me so much back forth to return this CV axle. It’s better to buy the FORD original PART AND PAY THE EXTRA$120 plus $$ to deal with the back and forth.

@xxdemonshitxx 2 года назад

I was wondering about that. Dude says they're "identical" even though the shaft in the middle is obviously shorter than the original. That sucks you were misled like that.

@tija99g.23 2 года назад

@@xxdemonshitxx The Boots are longer covering mor of Shaft I went with Advance Auto ( CARQUEST item for my 2006 4WD f150 and it looks like this new one But it works just fine !

@A.C.71 2 года назад

4:53 he puts it back in without applying any high temp wheel bearing grease? Another video showed applying wheel bearing grease first? He also states "now you can remove the jack..I see no jack?

@gironmike24 3 года назад

The 6 12 point 12 mm nuts are hard to take off lol

@tija99g.23 2 года назад

Yes just be sure no short cuts MUST be 12 pt 12 mm for tightest fit and DO NOT use Impact wrench at the beginning IF you strip them then YOu have to cut them off . I used 1/2 drive 12mm STD socket, But I sprayed WD PENETRATE OIL ON THEM THE NIGHT BEFORE AND AGAIN That morning they came off fine .