Тёмный

How to Replace Front Brake Caliper 2005-2007 Ford 500 

TRQ
Подписаться 480 тыс.
Просмотров 1,6 тыс.
50% 1

Buy Now!
New Brake Caliper from 1AAuto.com 1aau.to/ib/1ABCR00668
This video shows you how to a new front brake caliper on your 2005-2007 Ford 500. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
This process should be similar on the following vehicles:
2005 Ford Five Hundred
2006 Ford Five Hundred
2007 Ford Five Hundred
Tools you will need:
• 15mm Socket 1aau.to/obrM/1AXAA00015
• 17mm Socket 1aau.to/obrM/1AXAA00015
• 19mm Socket 1aau.to/oafD/1AXAA00043
• 21mm Socket 1aau.to/oafD/1AXAA00043
• Brake Caliper Hanger 1aau.to/oiw/1AXAA00439
• T40 Bit 1aau.to/oDA/1AXAA00008
• 1/2 Inch Ratchet 1aau.to/oafD/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/oa73/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obrM/1AXAA00015
• Torque Wrench 1aau.to/oaCy/1AXAA00044
• Gloves 1aau.to/o2F/1AXSS00048
• Safety Glasses 1aau.to/oTP/1AXAA00343
• Floor Jack 1aau.to/o3Q/1AXAA00068
• Jack Stands 1aau.to/oSr/1AXAA00065
• Wheel Chocks
• Wire Brush 1aau.to/osF/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

14 июн 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 2   
@TRQ
@TRQ Год назад
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@twc20031985
@twc20031985 Год назад
I find that it makes it a lot easier and less messy to leave the brake hose connected to the old caliper until you have the new one completely assembled on the car. I find that easier to swap the brake hose over quicker losing less fluid and you don't need the pig mat.
Далее
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,4 млн
#kikakim
00:31
Просмотров 10 млн
I Built a EXTREME School Bus!
21:37
Просмотров 6 млн
80 Year Olds Share Advice for Younger Self
12:22
Просмотров 1,5 млн
How To Perform a Professional Brake Job (Pads & Rotors)
38:48
How to Complete a FULL Service on Your Car
10:22
Ford Brake Caliper Replacment w/ Tips!
16:14
Просмотров 406 тыс.
Brakes Still  Dragging? And Not a Frozen Caliper?
11:05
Просмотров 283 тыс.
How to Inspect and Lube Your Brakes (COMPLETE GUIDE)
18:05
Brake Caliper Slide Pin Grease
12:38
Просмотров 1,9 млн