How to replace front brake pads and discs - Vauxhall / Opel Astra J Insignia (COMPLETE GUIDE)

Подписаться 37 тыс.

Просмотров 122 тыс.

50% 1

This video is showing how to replace front brake pads and discs in Opel\ Vauxhall Astra J and Zafira C, Insignia 2.0 CDTI Engine. (COMPLETE GUIDE) !!
With this step by step video you can do it at home using all common tools. And you’re going to save a ton of money and fell proud that you’re fix your own car.
Special tools:
Toque wrench
Brake piston compressor tool
Tightening torques:
Brake carrier to hub - 150 Nm (if you are going to use new bolts 150 Nm + 53 deg) And add medium strength threadlocker
Brake caliper to carrier - 28 Nm (you can add medium strength threadlocker)
Brake disc to hub - 9 Nm
Road wheels nuts - 140 Nm
Greases that I use:
Guide pins grease : Bosch superfit silicone based (safe for rubber elements)
Grease under brake pads metal brackets, on wheel hub as a anti seize grease and under brake pads : K2 cera high temp,
Also brake cleaner
More "how to" videos related with brakes you can find here:
• How to replace rear br...
• How to rebuild rear br...
Cars guide DIY assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Cars guide DIY recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Cars guide DIY, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Cars guide DIY.

Авто/Мото

Опубликовано:

21 май 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 100

@daniel-swimmin 4 года назад

I can not say that you did it like a pro because you did it like a master of the pro, i wish all mechanics would do it as you did it, clean nicely everything

@markholland9978 4 года назад

What I like about this video is the attention to detail. You give all of the information and make it look so easy whilst being professional. Cheers pal!

@abbas1872 3 года назад

Perfect brake job. You cleaned and greased all the right areas with the right greases. If only all mechanics did as thorough job as you, we wouldn't hear so many noisy brakes.

@jeffjeffjeff2 2 года назад

Great video and channel. You are better than most mechanics who want to do a fast job and cut corners on cleaning the caliper and associated parts. Well done!

@satueskelinen6666 3 года назад

Helped a lot! And saved me lots of money, when I could fix myself the brakes! Thanks from Finland / Astra owner

@straightblast569 Год назад

You should see the crappy mechanics we have in Britain they have no pride in there work and just want to make quick money you are a master mechanic man

@keithrobinson1171 3 года назад

Great video, very informative for those of us who like to have a go at car repairs on our drives. Keep the videos coming.

@Grimzareaper666 2 года назад

think i found a new favourite for tutorials on changing parts out, you made it look easy and did a very thorough job. Thanks for the video :)

@typhoontim125 4 года назад

Very thorough! Excellent. I wish you were my mechanic!

@gunstig-no 4 года назад

Good video, Great with the Torque numbers on the bolts. Thanks a lot! :D

@Ghost011 2 года назад

Honestly, thank you so much for this informative and straight forward How To :')

@marcelwildeboer 3 года назад

Thank you for charging, its helping so much big like from me and follow from now on.

@TheGazza636 3 года назад

really clear instructions best one on the utube thanks man

@calbackk 3 года назад

Good video, thank you. I´m just preparing to renovate the brakes on my Astra J. As a newly retired I have all the time I need. Last time I did it was 1989. (Not the same car :))

@carsguidediy 3 года назад

Good luck with yours. Regards :)

@paulrobinson4960 4 года назад

Great Video! Very Useful thanks 👍

@bigdosser7777 4 года назад

Followed this guide today. Took a bit longer than usual but everything looks cleaner

@carsguidediy 4 года назад

Great to hear it :) Regards

@marekgregory4512 2 года назад

Cheers….. just done both sides……very helpful 👍

@pedrovision6987 4 года назад

Wow...great video...thank you!! Subbed!!

@montyncfc-om1cv 7 месяцев назад

Great video well explained. the correct methods and grease 👍👍

@andywhyte8170 3 года назад

Good video I reckon I would attempt doing this myself now , saving some money which is always good thanks buddy

@ausualsuspect9639 3 года назад

Have a go mate just make sure you use a bit of wd and half decent tools if they ain’t been touched for a while, you don’t wanna be rounding any bolts like I did my first time 😬

@Osborn85 Год назад

Excellent video for non mechanic people. ❤🎉

@Pontus.B Год назад

Thanks for your good instruction. I have just completed my first break change ever 😊

@jr5389 Год назад

👍🏴󠁧󠁢󠁳󠁣󠁴󠁿😎

@freddykrueger3589 3 года назад

Excellent Explained. Well done....

@ilsozanatta7545 3 года назад

Very good video lol. Thanks 😊

@craiglangley9224 2 года назад

Great job

@dukedepommefrites8779 Год назад

Great video.

@serviceteam8408 2 года назад

Profi.. and TOP..!! Danke

@denizvuqitrna8271 4 года назад

I replaced my discs and pads a month ago on a second hand car i bought. After 2 days of driving the brake caliper decided to sieze up while driving causing smoke!! The car i bought must of been sitting around for such a long time that rust must of built u in the caliper piston and when new pads were installed the rust caused it to seize up! what a head ache! the smell was horrible haha. Good video! Subscribed.

@denizvuqitrna8271 3 года назад

@@bc-mr1si hi. Yeah I did. I don't know why it happened so I'm presuming it was just old and siezed.

@mbz4652 3 года назад

@@bc-mr1si If you open the bleed nipple, air will come in right? If I only open the reservoir cap is it ok?

@lukakrulc1092 4 года назад

Exelent!

@ryanrepairs6944 2 года назад

Good video thanks

@Mokry_Pierd 2 года назад

Great video,nothing else to say.

@raymondheaney7132 4 года назад

Brilliant video. just like to ask one thing, can i use red grease to lubricate slide pins. Many thanks

@bigroo 2 года назад

What an excellent video, exactly what I need right now. I assume it is the same principal for the rear wheels on the Astra J? Also could you please list the greases / sprays etc. that you used in the video?

@jr5389 Год назад

Cheers 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿😎

@litzvideogames2798 4 года назад

Hi ur videos is amazing maybe u can make also a video of changing of broken lug wheel for opel astra j thank you

@anthonyburgess4408 4 года назад

Hi great video would this be same method on a MK1 Zafier and is everything you used in the video needed like the greases and pastes

@WebReports 4 года назад

Great video!! It helps me a lot to change my discs and pads next weekend. What are you using in that spray bottle to clean?

@carsguidediy 4 года назад

Thanks ;) It's a regular brake cleaner, you can buy single can. Regards

@andraskeresztesi9732 4 года назад

"If fitting new pads, before refitting the caliper, push back the caliper piston whilst opening the bleed screw. This is to prevent any dirt/debris being forced back up the hydraulic circuit in the ABS modulator" !!!!! From Haynes service instruction.....

@flaviodeslandes 2 года назад

or, remove brake fluid reservoir cap..(?)

@tomo21120323 4 года назад

Thanks for this, I've just removed my discs and pads and I am just waiting on the replacements being delivered. If only commercial garages were as professional as you! Cheers!

@mirfan83 Год назад

Great instructional video indeed. Would you mind us telling about the brand of brack pads you recommend? Thanks.

@mbz4652 Год назад

ATE, Brembo, TRW, Bosch, ferodo, Zimmermann

@shifty2755 4 года назад

Great video. I'm about to do some on a 2013 1.6 astra. Question for you: Do you have to tell the ABS module that you have changed the brake pads?

@carsguidediy 4 года назад

Hi there. No you don't have to tell ABS module anything, 100% mechanical job. Regards

@shifty2755 4 года назад

@@carsguidediy Thanks for the reply! ✊

@calbackk 3 года назад

I need to buy a tool for unwinding the the brake caliper. What would you say are the requiremements/specification? I have seen there are different models and differenst sizes of the actual circular pad that do the pressing. I suppose it must not be too big. What is the right size?

@andrewshennan2774 Год назад

This guide was brilliant. My only query is that after following this guide I seem to have air on the brake pedal. Could it be that not opening the bleed nipple has pushed air into the system and damaged the brakes somehow?

@mbz4652 Год назад

Did you find an answer to your question?

@raducumucu1 Год назад

I also got spongy pedal after changing front rotors and pads + rear pads, feels like air in the system

@sallylane728 4 года назад

Hi, great video. Is it necessary to bleed the system after replacing these parts? Thank you.

@sallylane728 3 года назад

@@bc-mr1si Thank you.

@Robbie_B Год назад

Hi mate. I just snapped a guide sleeve bolt that need to be 28nm... what is the size and pitch of this bolt please mate??

@CroIntr00X 4 года назад

excelent, but one thing in mind, when using ATE coated brake discs you don't need to degrease them (its says in manual) because paint prevents rust its not bare surface so it doesn't have any grease on, brake pads will clean disc surface after few miles

@littlereptilian7580 2 года назад

Opel Grandland x 1.2 2018 . Does anyone know the tightening torques for the brake caliper and pins ?? Thanks

@preemptivestrike6465 2 года назад

How can you identify which brake pad goes on the outside and which one goes on the inside (the piston side)?

@Solymr21 2 года назад

hi, great video! would this work on the newer Vauxhall Insignia (2017-2020) ? Thanks

@carsguidediy 2 года назад

Hi there, it might be some slight differences but the whole process is very similar. Regards :)

@Solymr21 2 года назад

@@carsguidediy thanks :)

@sheennshine7 4 года назад

Could the copper grease be used for the guide pins if I didn't have any normal grease ?

@carsguidediy 4 года назад

Hi there, copper grease is bad to use with rubber elements, It's better to leave old grease than use copper one. Try to buy silicone grease. Available in any parts stores. Regards :)

@TheMirsad91 4 года назад

Hello, i want to ask if it is same procedure for the rear disc? P.S. I have regular handbrake.

@carsguidediy 4 года назад

Hi there, It's similar, but you have to retract caliper piston with retracting tool. You can check it how to do it in our video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8C_6vK7phmw.html Regards

@TheMirsad91 4 года назад

@@carsguidediy Thank you 😉

@gregor_bs335 3 года назад

Are you sure that the slider pin with rubber is on the top ?

@Ravsawicki1 2 года назад

Are you sure element with rubber shuould be on top?

@stephenquinn4826 Год назад

Do you not need to open the cap on break fluid reservoir when winding back the piston ?

@ellemarta Год назад

Yes you need to open the cap of break fluid

@bigdosser7777 4 года назад

Thanks for that, I would never have bothered to clean everything and I'm pretty sure the mechanics I have used didn't either as they done it far too quickly. I'm gonna follow this guide during the weekend. Looks a thorough job. I have the copper grease already but what grease did you use for those carrier bolts?

@carsguidediy 4 года назад

Hi there. Sorry for so late answer. If you are asking for guide pins, I'm using brake silicone grease ;)

@shifty2755 4 года назад

Basically, any high temperature grease will do.

@bertbox69 2 года назад

I have the Vauxhall workshop manual and just in case the caliper mounting bracket should be just 40nm torque,it's the wheels are 150nm

@BS-fz8td 3 года назад

How fix the front plastic ? Like in video preview blue car

@AhmetCan-fi3rx 9 месяцев назад

🎯♥♥♥

@rapman724 Месяц назад

Whats diameter of for wheel 2009 insignia 29,4 or 29.6 or 30.2 ???

@haroldgregory4807 Год назад

U made it look easy well done I shall do them my myself thank u .

@evieemaya88 4 года назад

Is the car at the start an Astra J or the insignia? Great video keep it up

@carsguidediy 4 года назад

Hi there ! It was Astra J 2.0 cdti 2013

@Rab_-cg9hd 2 месяца назад

Just a heads up to anyone trying this. The wee screw that holds the disc on is made of chewing gum, not metal it seems. I’m now stuck trying to figure this headache out 😂

@Spinrekisme 4 года назад

I have the electronic hand break is this just the same procedure?

@carsguidediy 4 года назад

Hi there, If you are replacing front brake pads and discs it doesn't matter. Regards ;)

@Spinrekisme 4 года назад

@@carsguidediy unfortunately it's the back☹️

@peeterjullinen6236 2 года назад

Isnt the wheelnuts 150nm?

@pitapita70 4 года назад

What about 2012 1.7cdti 123bhp?

@carsguidediy 4 года назад

Hi there. It's the same, you might have smaller brake discs but procedure is the same. Regards

@ugunskrusts7761 Год назад

...Shouldn't you have unscrewed the cap of the brake oil reservoir before work?...

@aggeloskirannos4218 4 года назад

Why I must to change the clips?

@daniel-swimmin 4 года назад

because they come included with the brake pads so why wouldn't you

@raducumucu1 Год назад

this video is a bit fake. The Screw that holds the disc never ever unscrews - it is stuck and it will break and will need 1 hour to get out. Also all screws and guida slides work very very hard to remove. In your video everything is so easy

@destiladosdealambiquelyvidigal 4 года назад

I'm sorry, this obsession. you made a mistake in returning the embulo; Before returning the embolus, it is mandatory to open the bleed. For the old fluid, dirty. Do not return to the system by damaging the ABS.

@Lawrence-Joseph-Norse Год назад

Repent to Jesus Christ! Are you a sinner? Luke 5:32 King James Version 32 I came not to call the righteous, but sinners to repentance. Luke 13:3 King James Version 3 I tell you, Nay: but, except ye repent, ye shall all likewise perish.