No video :(

How to Replace Front Brakes 94-02 Dodge RAM 1500

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,5 млн

Просмотров 102 тыс.

50% 1

Buy Now!
New Brake Kit from 1AAuto.com 1aau.to/ia/1ABF...
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old brakes. This video is applicable to 94, 95, 96, 97, 98, 99, 00, 01, 02 Dodge RAM 1500
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oNT/1AX...
• 21mm Socket 1aau.to/ojB/1AX...
• 1/2 Inch Breaker Bar 1aau.to/ofV/1AX...
• Ratchet 1aau.to/oPF/1AX...
• Torque Wrench 1aau.to/onf/1AX...
• Brake Grease
• Brake Parts Cleaner
• 10mm Allen Wrench 1aau.to/o8/1AXA...
• Wire Brush 1aau.to/oci/1AX...
For More Info visit us at 1aau.to/h/bQi/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@benone1259 2 года назад

freakin 3/8

@christopherjeremiahcullen2012 3 года назад

10mm was not the correct Alan size for the caliper pins on my my 98 dodge 1500 4x4.. Mine was 3/8 - hopefully this can save anyone else as many trips to the store as I did to get the right socket bit!

@chiefpacman 3 года назад

THANK YOU same for my 97

@NinjaofApathy 2 года назад

Yep 10mm is wrong. Good info thanks

@spelunkerd 4 года назад

That's a good review. These old floating calipers are held in V shaped grooves of the mounting bracket that can get rust jacking over time. Newer versions of the Ram were modified with clips to reduce that. The lower groove is seen at 11:28 of this video, on the lower left. There is a top one as well. For those who have these old style calipers, it would be wise to file down rust on the mounting bracket and the part of the caliper that has to slide in the grooves freely, then apply a small dab of caliper grease or antiseize there to prevent the caliper body from binding when it floats.

@1AAuto 4 года назад

+spelunkerd Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@justincox4096 3 года назад

The best online and with just the right level of sarcasm

@1AAuto 3 года назад

+Justin Cox Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@acu112 Год назад

Thank you for sharing, 2 vehicle's ago I went through the same steps comparing rotors, until my brother saw something wasn't right, he flipped both rotors face to face and the stud holes were about 3/16 difference. Sharing my experience, hopefully you and fellow RU-vid fans will benefit from my experience. Thank you.

@Ron-im6mj 4 года назад

What a great brake job. I would have this man change brakes on all of my cars. Great job.....

@jamesharding5335 2 года назад

You're just soo good at what you do, I am becoming a mechanic on my own thanks to you bro, and 1a auto of course but it's mostly you Len, you da man

@Serbianguy432 2 года назад

As always, good job. I enjoy your tutorials as they are very well done.

@ghostboi3391 Год назад

the rotors on the 98 are also the hub for anyone wondering

@ChrisWard64658 4 месяца назад

Great presentation. thanks

@louiszankowski7443 4 года назад

I have watched both the front and rear brake videos , as I am replacing all of the hardware for the rear and pads and rooter fo r the front .. I found these to be an outstanding teaching moment . Great job-

@1AAuto 4 года назад

+Louis Zankowski Thanks for checking us out! 1AAuto.com

@TheBoarder420 4 месяца назад

One major issue I had was he didn’t say “that’s not going anywhere” when he slapped the wheel at the end. Rookie 😅

@chiefpacman 3 года назад

Good video. More 94-02 Ram!

@russelllopez5424 3 года назад

Thia video is very good. Made it so easy for me to do the job. Excellent mechanic. Thanks!

@1AAuto 3 года назад

+Russell Lopez Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@RamonLFrancisco 4 года назад

Nice technique and explanations. Thanks.

@1AAuto 4 года назад

+Ramon Francisco Thanks for checking us out! 1AAuto.com

@markmolinari777 2 года назад

GREAT vid, Len! THANK YOU! I have a 2000 Dodge Ram 1500 and I really want to do the brakes myself. I also saw the vid for the rear brakes. That vid was EXCEPTIONALLY WELL DONE! Absolutely everything was shown and explained how to do. All I have to do now is, to work up the nerve to do it all! (LOL) One question, though... Shouldn't you clean the new discs with something prior to installation? Thank you, Len!!!

@edwinokeefe2345 3 года назад

you folks are awesome

@alcameron6071 4 месяца назад

Great video just a couple questions. After you install the pads on one side, do you pump up the brakes till you get a hard pedal before you do the other side and then just repeat the process? Another words pump the brakes each time you finish a wheel. Also, can you use white lithium grease on those sliders?

@nojunkwork5735 Год назад

So the grease you got on the brake pad is just supposed to wear off?

@kjhgkluigliuh 2 года назад

Thanks man. Great video Great prices. Cant wait to dive in

@zakkturner6031 3 года назад

It is not a 10mm its a 3/8 allen yall are welcome they are wrong i just bought a 10mm alle and it does not work its a little too big

@Vibekilla666 3 года назад

What year was the truck and was it 2wd or 4x4

@Shanice169 2 года назад

@@Vibekilla666 mine is a1996 2 wheel drive and I too just bought a 10 millimeter set that doesn't work just as Zakk stated

@robkitchen5344 14 дней назад

Well, my break clips for the pads are on each end, so this is useless for me. It doesn't work with 2000 Dodge Ram 1500

@pubby8668 3 года назад

Did this, realized I need a new stud, no idea how that works either 😭

@joedarden2276 Год назад

Outstanding

@brandocooper6530 2 года назад

Hello I'm doing my front brakes and rotors on my 99 1500 4x4 5.2l, my pads came with 4 rubber bushing i can see where the bigger rubber bushing or seal goes on the end of the caliper bolt but i have i have a flatter round indented rubber seal or bushing and then just 2 rubber o-rings where does the flat one and the 2 o-rings go? I have 4 sets so each caliper bolt has the end piece and the other 3

@CodLV Год назад

After finishing the drums i spun the wheel and it’s very tight. Barely gets moving. Could it be because of the 33’s? I didn’t check before so I don’t have any comparison but when I opened it they did get tighter so I’m just gonna ride it out

@backyarddiver86 2 года назад

Verry Nice...

@andrewburnes98 Месяц назад

I'm more concerned about all that rust, damn

@carlodonnell146 Год назад

No one ever takes the time to explain the cooling fins on rotors and identifying directional rotors on dodge ram specifically; it sure would help a lot if directional rotors were touched upon more when rotors/ pads etc were being installed. I tried the screw-driver trick on my dodge ram to see if I have directional rotors, but it didn't tell me anything because I was able to install the screwdriver either way. Any help out there? thanks!!!!!!!!!!

@natureandrandomstuff Год назад

My front brakes are different. I think the rotor is attached to the hub.

@chinolsx1818 3 года назад

I have a 99 Ram 1500 2WD, I was wondering if 4x4 rotors are the same and will fit or ?

@1AAuto 3 года назад

+Chino Lsx These rotors will only fit models with 4WD.

@marswrld2489 Год назад

Should’ve done the caliper too

@benone1259 2 года назад

good video though

@BADD400 5 лет назад

Good video

@DavidHernandez-ue4fz 4 года назад

Same process for 99 wagon 1500?

@1AAuto 4 года назад

+David Hernandez We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@joepiol5105 4 года назад

The caliper slider seals should have been replaced. Sometimes they come with the new pads. The inner seals seemed to be missing.

@1AAuto 4 года назад

+J Piol Thanks for the tip! 1AAuto.com

@brandoncartwright8829 3 года назад

Wth, this dude really putba new wheel bearing in and claimed he cleaned it

@bananapuffcream1 3 года назад

No he doesn’t LMAO

@wv02m 5 лет назад

OMG LOOK AT THAT SALT DAMAGE

@DixonBottoms 4 месяца назад

9mm, bud

@brandone6252 4 года назад

Time for an axle seal

@Gilpinales1 4 года назад

I jad a problem. My rotors are together with my hub. I don't know hoe to explain but my rotors didn't came out just like that. Looks like a had to take a bolt on the middle of the rotors.. I wish I could send tou a picture