Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ia/1ASLF00328
This video shows you how to install a lower control arm with ball joint on your 2006-2011 Chevrolet HHR. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This process should be similar on the following vehicles:
2006 Chevrolet HHR
2007 Chevrolet HHR
2008 Chevrolet HHR
2009 Chevrolet HHR
2010 Chevrolet HHR
2011 Chevrolet HHR
Tools you will need:
• Pry Bar 1aau.to/oc/1AXAA00020
• 15mm Wrench 1aau.to/oa/1AXAA00010
• 15mm Socket 1aau.to/ob/1AXAA00015
• 19mm Socket 1aau.to/ob/1AXAA00043
• 21mm Socket 1aau.to/ob/1AXAA00043
• Socket Driver
• Torque Wrench 1aau.to/oc/1AXAA00044
• Copper Anti-Seize
• Hammer 1aau.to/ob/1AXAA00091
• Rubber Mallet 1aau.to/oa/1AXAA00413
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
31 май 2022
