How to Replace Front Sway Bar 1988-02 GMC Sierra 1500

Подписаться 480 тыс.

Просмотров 40 тыс.

50% 1

Buy Now!
New Sway Bar Kit from 1AAuto.com 1aau.to/ia/1ASSL00183
When your sway bar has rusted or bent to the point of causing problems with your suspension, steering, or alignment, you’ll need to replace it, and likely the links and bushings as well. This video shows you how to install an entire kit of sway bar, sway bar links, and sway bar bushings with brackets on your 1988-2002 GMC K1500.
• Check here for more videos on the 1988 to 2002 GMC K1500 Sierra: • GMC K1500 Sierra 1988-...
This process should be similar on the following vehicles:
1988 GMC K1500
1989 GMC K1500
1990 GMC K1500
1991 GMC K1500
1992 GMC K1500
1993 GMC K1500
1994 GMC K1500
1995 GMC K1500
1996 GMC K1500
1997 GMC K1500
1998 GMC K1500
1999 GMC K1500
Tools you will need:
• Pry Bar 1aau.to/oi4/1AXAA00020
• 10mm Socket 1aau.to/o4H/1AXAA00017
• 22mm Socket 1aau.to/ocQ/1AXAA00266
• Acetylene torch
• Torque Wrench 1aau.to/oyr/1AXAA00044
• Gloves 1aau.to/oeP/1AXSS00048
• Rust Penetrant
• Safety Glasses 1aau.to/oaL/1AXAA00343
• Floor Jack 1aau.to/owG/1AXAA00068
• Hammer 1aau.to/on5/1AXAA00091
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
GMC K1500 Sierra 1988-2002 4th Gen: • GMC K1500 Sierra 1988-...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

31 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@brappplife9879 4 года назад

Holy crap what a rust bucket

@itzzztristangaming7979 8 месяцев назад

“Watch for the body, it’s the only nice thing on this truck” Not the camera man showing the rust 😂

@tedlyb 4 года назад

Swapping out the sway bar on my Suburban now and I'm having a hell of a time getting the mounts to go in place. Thanks for the illustration that I'm on the right track!

@justinmartinez9891 3 года назад

surprised it didnt fall apart more taking off those bolts and bushings

@epyoncat Год назад

I can’t believe the amount of rust!

@nestorroman2694 3 года назад

Man you make it look simple! Excellent information Sir.

@freedomforall5071 2 года назад

that truck been at Fertilizer Plant!!!

@mcrowley8460 2 года назад

I don't think the new parts will improve anything the crusty frame will flex itself around them & continue to disintegrate. I'm impressed with you getting those sway 10mil bolts off with the impact & extension.

@arturomacarthur799 Год назад

Gracias, thank you very much.

@OverVolts83 5 месяцев назад

in video you say put bushing slits facing rear, in haynes manual book says slits towards the front, when replaced mine the old ones faced front also

@MakinEndsMeet69 3 года назад

Well it definitely helps having air tools and being on a lift. You know I am disabled so I did one side first and let me tell you I think it would be easier just to drop both sides in the whole bar first like you did I still have to do the other side so I'm going to take the one side loose again and I have some welding to do on the frame on the driver side because the bolt had rotted through on the big bushing clamps so I will have to weld in some new metal with a nut on the back side. Nice job man

@TRQ 3 года назад

+Joseph D'Angelo Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@Hectorson3 3 года назад

Made that look so easy. I think its the same set up as my 1993 K1500

@hawkdsl 2 года назад

What can one do when the bar bolts wont tighten all the way down? (Internal press bolt spins in frame). Anyone have any ideas?

@EVM1978 3 года назад

Why would you need to replace the sway bar? bent or rusted? I asked this before watching the video, is that truck up for a whole front end replacement? soo much rust...

@travelingecho 3 года назад

That swatbar Is going to put last that front end

@jimmyu6079 2 года назад

Those bracket bushings are mf to get back in

@leepower3748 3 года назад

How did he get the bar below A arms?

@mikey4016 3 года назад

Did you really put new components on that rust bucket and let it back out on the road? That thing was so rusty it is a dangerous vehicle. And I'm someone who prefers old vehicles, but when you live in the rust belt, you can't have nice vehicles and they need to just be crushed and melted down, there are holes rusted through the frame and when you can see it in as many spots as you could see it in this video, you can be sure it has almost no structural integrity anywhere.