No video :(

How to Replace Front Sway Bar Links 06-11 Honda Civic

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,4 млн

Просмотров 90 тыс.

50% 1

Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ia/1ASFK02849
In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 06, 07, 08, 09, 10, 11 Honda Civic.
🔧 List of tools used:
• 14mm Wrench 1aau.to/tha/1AXAA00010
• 17mm Wrench 1aau.to/tha/1AXAA00010
• 19mm Socket 1aau.to/tig/1AXAA00043
• 1/2 Inch Breaker Bar 1aau.to/tcF/1AXAA00078
• Ratchet 1aau.to/tBQ/1AXAA00016
• Torque Wrench 1aau.to/tgE/1AXAA00044
• Rust Penetrant
• 5mm Allen Wrench
• Floor Jack 1aau.to/tgo/1AXAA00068
• Jack Stands 1aau.to/tgn/1AXAA00065
• Wire Brush 1aau.to/taS/1AXAA00079
For More Info visit us at 1aau.to/h/agy/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

28 дек 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@tun6006 Год назад

All your videos are simple and straight forward which I love. I just wish I had access to a quarter of the tools and space to do any of this stuff myself.

@billyeason9899 3 года назад

Ratchet wrench dominates here

@calebs5469 3 года назад

That's all I was thinking the whole video

@collinasgarali2777 2 года назад

good mechanic. good job. patience is always the key

@edwardinvegas 2 года назад

2 comments. Need (easier) to use a ratchet wrench for removing the nuts. You didn't torque the nuts for the Front Sway Bar TOP nut is 28 Foot lbs. BOTTOM nut is 25 Foot lbs. as per the Honda Service / Repair manual.

@BigPackets Год назад

what do you do if you stripped the allen key?

@jackslater2297 4 года назад

What size/drive breaker bar is that?

@jaredreynolds7192 Год назад

I use pliers or a vice grip to crack it free it tears the boot in the process but if it's being replaced it doesn't matter makes it a lot easier and faster

@AD-pb4vq Год назад

Any torque spec for the link?

@primalphatman Год назад

What if u used the allenkey to tughten the links?

@buskerbusker8826 2 года назад

Should you align the wheels after this?

@txkwrld 2 года назад

every time you work on suspension get a alignment

@onilovni1234 4 года назад

I bought new links for all 4 wheels on my Acura TL and I can't wait to change them to get rid of the rattling noise! Does anyone know why Honda sway bar links make so much noise even if they appear to be alright?

@FleetTech97 3 года назад

Make sure when checking them that both front wheels are off ground. Because if you just jack up one side the link Is under tension and won’t make noise

@allantreyes4445 3 года назад

Sometimes the nuts are only loose need only to tighten them.

@Mission7608x2 2 года назад

Any reason you don’t use impact tools in your videos? Is it the noise or you guys just don’t like them?

@kneebarx Год назад

no way these come off that easily...

@SnedzTheBricklayer 5 лет назад

I can do this!!! Just starting out with car DIY , can you recommend good Jack's or something to lift the car off the ground and won't kill me? Lol

@1AAuto 5 лет назад

+Gaming Construct Thanks for checking us out! You can go with our kit that comes with the trolley jack and 2 jack stands. This will be sufficient with a vast majority of vehicles. This is a great starter jack and the link to this is www.1aauto.com/trolley-jack/i/1axaa00068

@craigmoorer5927 5 лет назад

Take this from someone who has screwed around with those Allen keys; don’t even bother. Just take a grinder and cut the bolt out on the side of the rubber boot on the link.

@charbelsalem2965 3 года назад

How much the price for the original

@reeda.1105 3 года назад

I love you guys so much lmfao

@eckoblaze 5 лет назад

Civic 2010 making clicking noise when turning steering wheel.. maybe this is the culprit? Or other bushing joints?

@monicosanchez7320 Год назад

Anyone know the size for front sway bar bolt size

@soufianemess7681 3 месяца назад

Hi, if anyone has an answer to my question please welcome! I just removed the link it from my civic then I realized the new one are slightly different in a way that it doesn't do a 90 degrees, it's slightly leaning. These are the original ones tho! Does anyone have an explanation?

@LopSidedPopCan 6 лет назад

Will this be the same as the si?

@trevlouie 6 лет назад

similar but should be the same

@LopSidedPopCan 5 лет назад

SFN Poker thank you!

@Goodnightandgoodluck-c7m 3 месяца назад

Is there a need for alignment after this? Anyone thanks

@whatdadogdoin7531 Год назад

Do I need to get an alignment after this??

@1AAuto Год назад

+what da dog doin?? Yes, you would need an alignment after this installation.

@aa-mc9ci 3 года назад

Who is one is right ?who is one is left?

@Barn94 5 лет назад

its about time for a news brush

@1AAuto 5 лет назад

+BarnHaas Thanks for checking us out!

@skunkycatog 3 года назад

What would be the reason for switching these?

@josephfarr2988 3 года назад

The rubber bushings get bad after a while and become loose causing a knocking sound while driving, not a major safety issue but it could affect the handling of the vehicle

@jean-pierremallet3524 8 месяцев назад

I put AC delco links on all 4 and fronts are failing after only 1.5 year. should have put oem honda links. originals lasted 14 years

@johnbugman1 5 лет назад

What was the purpose of changing these out? Car symptoms ??!

@TylertheGeek28 5 лет назад

A knocking or clunking noise coming from any side of the vehicle when going over bumps, almost sounds like a broken shock but you can definitely feel something is wrong with the steering.. trust me all four of mine are broken lol

@1AAuto 5 лет назад

+Rezuh Snipes Bad handling and a rattling noise from the tire area

@turdsandwicher Год назад

@@TylertheGeek28 I have a Civic and mine is completely broken on the passenger side. But I didn't notice any issues with the car I only noticed because I was changing tires.

@wade4839 5 лет назад

My car doesn't have these 2007 honda civic type s 2.2 Europe

@1AAuto 5 лет назад

+Wade Ragsdale While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. 1aauto.com

@arielunicorn2442 5 лет назад

What the simpton if stabilizer link filure bos?

@1AAuto 5 лет назад

+Ariel Unicorn Typically, you will hear some knocking noises coming from the strut area. 1aauto.com

@gwhite0992 5 лет назад

In the northeast.....take grinder and cut through rust, 2min done

@craigmoorer5927 5 лет назад

Xactly.

@brianr.541 4 года назад

Where exactly did you cut them off? I'm thinking this is what I will need to do on my 2008. And did you use a regular angle grinder?

@tonistarks2874 3 года назад

Dude I did the same for all my all my four sway link bars on 2007 civic Honda..When I tried the first and saw that the car had its original Oem sway links bars and the rust and troublesome it was giving me.I said screw and busted it out my grinder...real fast !

@turdsandwicher Год назад

@@tonistarks2874 Did you cut the nuts off or where did you cut with the grinder?

@chetanhanda 6 лет назад

How can you tighten it without a torque wrench ? what do you mean nice and snug ?

@FlameHazeist 5 лет назад

It means don't overtighten (apply excessive force for a socket of that size) or undertighten (apply too little force). When in doubt, tighten a nut first, then put on a second nut and use a torque wrench to get the feel for it.