Тёмный

How to Replace Front Sway Bar Links 1988-02 GMC Sierra 1500 

TRQ
Подписаться 465 тыс.
Просмотров 62 тыс.
50% 1

Buy Now!
New Sway Bar Link Set from 1AAuto.com 1aau.to/ia/1ASSL00056
Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle. This video shows you how to install new TRQ sway bar links on your 1988-2002 GMC K1500.
• Check here for more videos on the 1988 to 2002 GMC K1500 Sierra: • GMC K1500 Sierra 1988-...
This process should be similar on the following vehicles:
1988 GMC K1500
1989 GMC K1500
1990 GMC K1500
1991 GMC K1500
1992 GMC K1500
1993 GMC K1500
1994 GMC K1500
1995 GMC K1500
1996 GMC K1500
1997 GMC K1500
1998 GMC K1500
1999 GMC K1500
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 10mm Wrench 1aau.to/oa/1AXAA00010
• 13mm Wrench 1aau.to/oa/1AXAA00010
• 10mm Socket 1aau.to/oa/1AXAA00017
• 13mm Socket 1aau.to/oa/1AXAA00015
• 22mm Socket 1aau.to/oa/1AXAA00266
• Air Chisel 1aau.to/oa/1AXAA00270
• Socket Extensions 1aau.to/oa/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oa/1AXAA00044
• Rust Penetrant
• Hammer 1aau.to/oa/1AXAA00091
Subscribe: / @trq
Check out our playlist:
GMC K1500 Sierra 1988-2002 4th Gen: • GMC K1500 Sierra 1988-...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

26 апр 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 43   
@TRQ
@TRQ 3 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@mindyourbusiness702
@mindyourbusiness702 3 года назад
"You can use a 10mm wrench, if you have all day" bruh that killed me 🤣🤣
@TheUndertoe
@TheUndertoe 3 года назад
If you can even find your 10mm the sons of bitches always get lost 😂
@Gzusgeek
@Gzusgeek 3 года назад
An excellent video...so well done. I have watched thousands of auto repair videos and this was one of the best. Hope you get tons of subscribers.
@chrissupport
@chrissupport 6 месяцев назад
Beautiful truck, but that's some serious chassis rust - I feel better about mine now. My links were rusted solid and I cut them with a sawzall. I need to get an air chisel. Thanks for good instructions and saying the slot in bar bushing goes to the back.
@grayjc
@grayjc Год назад
I recently repaired my 1996 GMC Yukon and found that the stabilizer link bushings were difficult. It would have been much easier to reinstall with the bolt flipped around as your video depicted but I found that the upper swaybar did not have much clearance and I was concerned the swaybar would contact the bolt threads on bumpy roads. I replaced the assembly with the bolt in the down position. Thanks for the video. Sorry for my late comment.
@TRQ
@TRQ Год назад
+John Gray Thanks for watching our video! 1aau.to/m/Shop-TRQ
@BBB-ly8ro
@BBB-ly8ro 3 года назад
What harbor did you guys bring this madden to top from?
@ismaeljimenez9190
@ismaeljimenez9190 3 года назад
Thanks man I love your videos You always make it look like a piece of cake
@ericbeal6358
@ericbeal6358 Год назад
One question, what's a vericle?
@whenever-199iq
@whenever-199iq Год назад
good video. Professional
@ronniebuchanan6802
@ronniebuchanan6802 2 года назад
Dude, use a Sawzall to cut the old links off!!!
@livinlovinlaughin99
@livinlovinlaughin99 Год назад
My sway bar is sitting directly on top of my new sway bar links giving me zero clearance, and now I've stripped out my sway bar bracket bolt trying to adjust it all, this is very, very, very frustrating I don't know what I have wrong.
@dieselwrench3621
@dieselwrench3621 2 месяца назад
I think road salt has gotten the better of that frame
@jameslyall5517
@jameslyall5517 3 года назад
That is a great video
@TRQ
@TRQ 3 года назад
+James Lyall Thanks for the feedback! 1aau.to/m/Shop-TRQ
@tylerdubois9020
@tylerdubois9020 3 года назад
Isn't this the same guy from 1A-Auto?
@mikefdieseltech3851
@mikefdieseltech3851 2 года назад
This seems quite a bit easier if one of them is just completely gone lmao 🤣
@TrapHouseZombie
@TrapHouseZombie 2 года назад
I know the feeling. Just bought a 97 Z71 from my uncle a couple days ago and the steering has a bit of play in it so while I was doing an oil change I looked around underneath and seen the passenger side one of these was just dangling there snapped off.
@JamieMac203
@JamieMac203 2 года назад
Doesnit matter which way the bolt goes ? Up through the lower control arm or down through the bar ? If that makes sense
@jackygracing895
@jackygracing895 2 года назад
I was also wondering that
@jackygracing895
@jackygracing895 2 года назад
After doing it I can say I think it doesn’t matter. When I pulled the original end links off it was bolt going down and nut at the top. But when I put it back together I did bolt going up and nut on top since it was easier for my situation. Haven’t had any problems
@itsruffoutchea6636
@itsruffoutchea6636 2 года назад
I'd be so upset with all that rust under my vehicle. Glad I live in the south.
@djkoold8833
@djkoold8833 2 года назад
me too
@corydunaway
@corydunaway 2 года назад
Had to be a northern truck with that amount of rust underneath
@maxpooga
@maxpooga Год назад
Yep going to the mechanic 😂
@sntruck
@sntruck 4 месяца назад
Why is your bolt upside-down
@centralcoastcamper9631
@centralcoastcamper9631 3 года назад
What a rust bucket!
@jakeman4325
@jakeman4325 2 года назад
Nice Veerhicle
@cadillacman8223
@cadillacman8223 3 года назад
damn thats crusty! great video
@TRQ
@TRQ 3 года назад
+Cadillac Man Thanks for watching our video! 1aau.to/m/Shop-TRQ
@redneckwonderland
@redneckwonderland 3 года назад
the 92 2wd has completly dif upper control arms wish ya could reach through em Ill probly cut em and then weld a big ass plate over i i spose! lol ;P
@uruiamnot
@uruiamnot 18 дней назад
Dude, the manual says to torque the end links only once the vehicle is at the correct ride height and the wheels are holding the vehicle. So this is wrong.
@Spellcheekswammablamma
@Spellcheekswammablamma Год назад
That’s a lot of rust!
@tnbass2833
@tnbass2833 Год назад
I'm pretty sure I saw rust holes in the frame of that thing
@lht5dy31
@lht5dy31 11 месяцев назад
Pain in the ass! In order to get the bottom nut on, you need to compress it with a bar, or have an extra pair of hands. The thread just barely clears the inside bottom a arm.
@averybeam4120
@averybeam4120 13 дней назад
Brother that rust on your vericle tho
@tylerturpin7171
@tylerturpin7171 2 года назад
Verhickle
@pestbytrade
@pestbytrade 2 года назад
Seriously rusted control arm
@daddymaloney3392
@daddymaloney3392 2 года назад
Forgot to show the bottom and how it goes in ffs !
@daddymaloney3392
@daddymaloney3392 2 года назад
Like does the washer go into the hole?
@brian7189
@brian7189 2 года назад
Seek Jesus! Repent for the Kingdom is at hand! Jesus is the way! The truth! And the life! He’s the ONLY way! Open the Bible, read and understand that we are in the last days! Put your full trust in him! Believe 1 Corinthians 15 1-4!
@thelikebutton4405
@thelikebutton4405 Год назад
"Veerhicle"
Далее
How to Replace Sway Bar Bushings and End Links
9:51
Просмотров 4,1 млн
Is it impossible to cut off so much?💀🍗
00:14
Просмотров 4,1 млн
Despicable Me Fart Blaster
00:51
Просмотров 4,7 млн
Top 5 Problems GMC Chevy Truck 4th Generation 1988-02
7:46
Sway bar links replaced 2013 Chevy Tahoe
8:24
Просмотров 15 тыс.
How to Replace Sway Bar Link 07-13 Chevy Silverado
10:48
Budget Truck Restoration (start to finish) / DIY
40:33
Просмотров 107 тыс.
1998 GMC K1500 Upper and Lower Ball Joint Replacement
29:26
three feet under the keel   #offroad
1:00
Просмотров 2,8 млн