How To Replace Garage Door Bottom Seal

Подписаться 992 тыс.

Просмотров 248 тыс.

50% 1

Seal Used (18 ft): amzn.to/2LD3ZBY
With a little knowledge this one is a super quick fix. I would recommend having a helper when pulling the new bottom seal through the channels which will make things a lot easier.
Tools Every Weekend Warrior Needs
Makita Corless Drill Combo Kit: amzn.to/2Jsw78j
Dewalt Drill Bit Set: amzn.to/2w0xAA4
Dewalt Screwdriver Bit Set: amzn.to/2UqTvK9
Craftsman Screwdriver Set: amzn.to/3bAsNEG
Eklind Allen Wrench Set: amzn.to/2wKDu8M
Pliers (4-Piece Set): amzn.to/2JlYUM7
Stanley Utility Knife: amzn.to/2Us2pqG
Stanley Tape Measure: amzn.to/2WPzr5K
Studbuddy Stud Finder: amzn.to/33SaZC4
Johnson Torpedo Level: amzn.to/3dzx5Ot
Stanley Hammer:amzn.to/39tudPL
Buck Bros Wood Chisel Set: amzn.to/2QTebYO
Klein Voltage Tester: amzn.to/2XMa1I2
Wire Strippers: amzn.to/2NHHKuS
Little Giant Ladder: amzn.to/2UrFmfG
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@leewhitmore5350 3 года назад

Over time the bow for the vinyl will collapse from being in contact with the floor when the door is closed. A good solution is to cut a long piece of old hose and thread it into the bow all the way across the door. It will keep the vinyl shape and provide a longer lasting bottom seal.

@chrisbartz5439 Час назад

Could some foam backer rod work too?

@hascjl 3 года назад

Thanks for a great video!

@EverydayHomeRepairs 3 года назад

Happy to help!

@bobabooey8367 3 года назад

Thanks Scott and for not playing unnecessary background music

@metallideth8105 Год назад

Another tip is to fold the extra few inches of weather stripping at each end and tuck them back inside the channel. This will prevent you from having to use screws to keep it in place as well as serve as extra stripping if it ever shrinks!

@katrinaherring4507 7 месяцев назад

Whenever I have to 'thread' something; screen seals, bike handles etc, I spray soap and water in forward direction and on material; really helps.

@Badge1122 3 года назад

Thanks for not having loud stupid music playing

@EverydayHomeRepairs 3 года назад

I use background music sparingly. 👍

@yojoehd 11 месяцев назад

I really liked your idea about a "one-man" operation. I work alone in my home fabrication shop and I have had to design many assists like you demonstrated to be able to work without assistance. Up here in northern Wisconsin, on Lake superior, I always spray the bottom of my garage door seal with silicone so it does not get frozen to the concrete surface. That saves your seal and the nylon gear system in your garage door opener from trying to pull a frozen door.. Now, if you could just tell me how to keep those darn rodents from chewing on my garage door seal. I'm going to try to butter the outside edges of the seal with some Asian fire oil this winter.

@quindarius3074 2 года назад

I called a garage repair company to get a estimate and it was going to be $121.00 for trip charge, labor, and rubber seal. I believe I can change the seal myself. Thanks for the video.

@delinquense 9 месяцев назад

Actually that might not have been such a bad deal. the key here is that the seal that Scott was using was apparently a vinyl one and they were going to use a rubber one. you're much better off going with a good quality Rubber seal any day

@sifat9667 28 дней назад

That's cheap for what the work is and how annoying it is to get through the channel.

@DavidJones-by9uy 4 года назад

The clamps holding up the seal is a game changer! Thank you for that! This is the content I come to RU-vid for!

@EverydayHomeRepairs 4 года назад

Oh yeah, super handy for sure. Like a 2nd set of hands 🙌

@sil19583 3 года назад

@Gr8thxAlot Год назад

My Wayne Dalton seal (w/ round bead) was an absolute bear to replace due to resistance in the channels. I had to spray it down with liberal amounts of fluid film to get the seal to slide through.

@ConstructionMachineryChannel 4 года назад

Did you end up having to use the 2 screws to hold it in place? Did it make it through the winter ok? I'm also in the Midwest (Illinois, Chicago) and am curious how important it is to use the 2 screws.

@EverydayHomeRepairs 4 года назад

Nope, just bent the channel in slightly at each end. Made it through the winter with no problem and no shifting. Best of luck 👍

@ConstructionMachineryChannel 4 года назад

@@EverydayHomeRepairs Great, thanks.

@arielstereo5484 2 месяца назад

Great info! Our garage stop seal does not run end to end. The installer left out like three inches on each side with no seal. The seal needs to seal the entire bottom correct?

@RussSanderlin 2 года назад

How did you know to select 2.5”? Is that the distance between each track?

@knagl 2 года назад

Measure the width of the seal that you currently have and match that. It will be a larger number than the distance between the tracks since it will be installed in a "U" shape as part of the width.