How to Replace Garbage Disposal Splash Guard Gasket

Подписаться 84

Просмотров 54 тыс.

50% 1

How to Replace Garbage Disposal Splash Guard Gasket
Link for Gasket/ Splash Guard amzn.to/3lt00YD (affiliate link)
I show how I change / replace my garbage disposal splash guard gasket (aka rubber, gasket) on leaky or broken garbage disposal. P.S. This was my 1st video. I ended up with a small leak I noted a few days later and I re-did the video. This video you are watching is the new updated version. I will have to go to my 1st video and add a link to this one. If you are learning how to make youtube videos this is one of the things that you will encounter. I will leave the first video up so that you can see the different approach and we will go over ways to improve video capture and editing in a future video.
Disclaimer. The GME and stocks comments were just jokes. Invest in yourself and whatever you want as time and opportunities show themselves. Good luck!
Update: I posted this video a few months ago ( link to the old video that ended up with a leak • Replace Garbage Dispos... )
After a few months I realized it was leaking. Listen to the new video to avoid the same mistake I made the first time I did this.

Опубликовано:

20 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@kmh997 Год назад

Thanks! I appreciate that you were so specific about how the mounting ring works. All the videos I've watched so far gloss over it like it's intuitive. "Use a screw driver to unmount" is insufficient for a first timer! I was able to remove it and put it back up with confidence! I think beginners generally do these videos better because they know how an inexperienced person approaches the task. Telling what *not* to do, is as helpful/important as telling what one should do. I think you covered everything well!

@MrGeoffois Год назад

Thank you for this video. Helping a client sell a house and just realized we can get a new splash guard.

@frecklefaceu2 2 года назад

Thank you seems straight forward. Using support is a great idea.

@ILiveThereforeIAM 3 месяца назад

Nice overview, just what I wanted along with tips on what to look for not to do... Thank you! :D

@briant6742 3 года назад

thanks for showing this. my instructions didn't even show where or how to install the baffle.

@alcameron6071 7 месяцев назад

That's a great video. I'm getting ready to replace my splash guards, two of them fell off and I can hear them rattling around, I hope I can get those pieces of splashguard out of there when I pull the disposal out from under the sink.

@robsearle6197 4 месяца назад

Thanks man. Very helpful.

@garryfavor7614 Год назад

Good video, great tips. AND you’re not the only one that has to do-overs 😊

@irenafields3324 2 года назад

Thanks. You made it so easy!

@TommyTCB56 Год назад

First time for me.your way looks easy. Thanks

@autumndenison5627 Год назад

Thanks! I was able to change my gasket in just a few minutes!

@ginavia76 Год назад

Great video, thanks lots 😊

@GnosisMan50 Год назад

A scissors car jack with a flat piece of wood (about 6 by 6 by 1/2" thick) between the jack and the disposal would work much better.

@KJ-vc3sw 7 месяцев назад

Thank you. I'm going to have my mom watch this video so that she can take the bus over to my house and fix my disposal. My roommates and I are sick of stuff flying all over the kitchen every time we use it, she's sick of having to clean it up the mess when she comes over, and I'm tired of her constantly whining about it. Doggone it!

@jasonelepano Год назад

Nice work!

@johnhalchishick7094 3 года назад

Apartment maintenance replaced disposal and I think he did just what you said. I took it all apart , first he didn't knock out the plug for dishwasher drain. I did notice like you said the gasket looked deformed in one spot. I took the gasket off tried to reset it. Still leaks, matenance guy pulled it off but didn't replace the gasket, it's still leaking. Two piece gasket type, gasket doesn't have the splash guard built-in. Separate splash guard goes in from the top. I wonder if it was originally the one peace gasket and the new one is a two piece gasket set up. Would that make it leak. Anyway I think you're right he pinched the new gasket. Oh the push in splash guard also doesn't fit correctly. Kinda makes me think it was the one piece gasket originally.

@reneocasio3074 3 года назад

They need to fix that leak. I'm not sure what your setup is but eventually all that water leaking could create a mold issue and could damage the wood. I hope you don't have to wait too long before they fix it. Good luck!

@rodneysmart9774 2 года назад

My OG gasket was damaged/melted by pouring boiling pasta water down the sink. Run cold water and pour boiling water slowly. Now I have a double sink, we drain the pasta water in the other side.

@synthesizerisking2886 2 года назад

My garbage disposal was leaking and I could not get it off, so I got angry and tightened it back on and it just stopped leaking!!! My splash guard slides out from the top, so I will just slide a new one down inside from the top, if that works then I am good!!!😁😁😁😄😄😄