No video :(

How to Replace Ignition Lock Cylinder 1999-2006 Chevrolet Silverado 1500

Подписаться 509 тыс.

Просмотров 22 тыс.

50% 1

Buy Now!
New Ignition Lock Cylinder Kit from 1AAuto.com 1aau.to/ia/DMIM...
This video shows you how to install a new ignition lock cylinder from TRQ on your 1999-2006 Chevrolet Silverado 1500.
Estimated installation time for a professional technician is approximately: 48 minutes
This repair was done on a 2004 Chevrolet Silverado 1500 Base 4.3L Extended Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• 8mm Wrench 1aau.to/oku/1AX...
• Trim Tool Set 1aau.to/oaAX/1A...
• Gloves 1aau.to/obfV/1A...
• Safety Glasses
• Pick 1aau.to/o5C/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 10

@TRQ 3 месяца назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@strangeroamer3219 3 месяца назад

I did this myself months ago. You can also just shift to neutral and avoid disconnecting the battery altogether while avoiding it turning on. That's what I did.

@mr.velocitystack4133 9 дней назад

What if my key will not allow the tumbler to rotate to the "on" position? That is whole reason I need to install a new one.

@lsimpson6223 13 дней назад

Your model may be a different year than mine. I had to remove the lower part of the steering column cover because there are 2 screws holding the top ½ down. 1 short screw right behind the ignition switch/cylinder, and 1 long screw on the opposite side behind the turn signal lever/switch

@sanchoancho6510 Месяц назад

Hey Jason. If you ever want to sell thjs truck. I’d love to buy it from you. I’ve grown to like watching your videos. Taught me a thing or two and now I’ve been working on my own Silverado because of your videos. Thanks so much!!