No video :(

How to Replace Ignition Switch 1999-2014 Hyundai Sonata

Подписаться 33 тыс.

Просмотров 39 тыс.

50% 1

Need to learn how to replace your IGNITION SWITCH on your 1999-2014 Hyundai Sonata? Well, then this video is for you. If I can do it...you can do it!
-This video is certainly on the longer side; feel free to skip around. I'd rather the viewer have more than enough tips/tricks to tackle this job. If the cost is to make you suffer through more of my talking, then so be it.
-The vehicle I worked on in this video was a 2008 Hyundai Sonata GLS
Helpful Links:
-TRQ Ignition Switch for 2008 Hyundai Sonata (check website for your specific year): www.1aauto.com...
-Dewalt Full Socket Set: amzn.to/3BUH4Ko
-Gearwrench Flexhead Ratchet Set: amzn.to/3ycTtqt
-Klein Stubby Multi-Bit Screwdriver: amzn.to/3OBcLR8
-Klein Multi-Bit Screwdriver: amzn.to/3YgKbYk
-Skil Cordless Rechargeable Screwdriver: amzn.to/477N6Xr
-Tekton Hex Key/Allen Wrench Set: amzn.to/3QjdyHx
-If I forgot something, just ask me below
-(As an Amazon Associate, I may receive a small commission for qualified purchases using the Amazon links above; it does NOT affect the price you pay in any manner)
-If you're interested in checking out my other videos - which include CAR REPAIRS and FIREARMS CONTENT, with some of my older content centering around ELECTRONIC MUSIC MIXES, AIRSOFT, and some other MISCELLANEOUS things, then click this link: / elitekickboxer
~I'm also on IG: Scott_Fiala

Опубликовано:

31 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 68

@ELITEkickBOXER Месяц назад

If your key is stuck in your ignition cylinder or you cannot turn the key, you can attempt the following: 1) Wiggle/play with the shifter to ensure it is in park (or try to put it in park and neutral and back again with your foot on the brake -- if this is possible), and perhaps this can free up the ignition cylinder. 2) Wiggle the steering wheel side to side while trying to move/turn the key. 3) Spray some lubricant into the ignition cylinder. 4) If these steps don't work, you can attempt some form of brute force (though you may inadvertently make the situation worse), search Google for other means, or contact a mechanic. ***If anyone has this issue and resolves it or has a different method, please reply to this comment so others can learn from your experience.

@steveandsarahrutledge9105 14 дней назад

Great video because you explained it so simply and paced it well. THANKS! Was able to do this repair no problem. ***IF YOUR KEY IS STUCK AND CAN'T TURN TO ACC*** as mine was , I squirted several generous blasts of WD 40, tapped on the end of the key and other places while trying to turn it to loosen the pins: After about ten minutes, and after my youngest belted out a prayer in Jesus name for the thing to move, we got it moved. 2009 Sonata folks, there is an extra screw you have to detach and to get to it you have to pull out more of the left SIDE panel (the one pulled out initially.) Thanks again for the great video! Saved me 100's!

@ELITEkickBOXER 14 дней назад

Thank you for the feedback. Also, glad to hear it went well. Appreciate the info on your experience with the stubborn key not turning.

@susanabele394 5 месяцев назад

Yay!!! I did it... Someone tried to steal my 2011 Hyundai Accent about a month ago. I ordered a replacement ignition lock cylinder (with keys) via Walmart for $31, and it arrived in less than a week. The hardest part was wiggling my old key into the acc position, so I could remove the vandalized part. Aside from the delivery time and my apprehensive procrastination, the actual replacement took less than 30 minutes.

@williamhawkins5476 4 дня назад

Thanks very informative.I am having to replace my switch just waiting on it to arrive from the US to Western Australia very slow mail. Thanks again .

@richtrask6907 10 месяцев назад

Thank you so much for this video, I had the same repair on my 2008 Sonata, and this video was perfect in helping me thru the replacement of the Ignition Switch.

@RRack 3 месяца назад

I'm helping a family member replace his worn out cylinder. The issue is that the key often just won't turn. My question is how can we remove the old cylinder if the key won't turn to acc/start to depress the pin?

@jacobjackson7231 Месяц назад

Did you ever get it figured out? Having this same problem rn and I need to get this ignition out

@JGallis 6 месяцев назад

7:07 What if the ignition won't turn to the second position, what should I do to get it out?

@kellyhatphoto 29 дней назад

Thanks!

@shanebaileycreates Год назад

Thanks a lot. You explained that perfectly

@ELITEkickBOXER Год назад

Thank you for the feedback.

@Hendrix642 5 месяцев назад

Great video, thanks man!

@SWAYL0W 11 месяцев назад

What if your key won’t turn at all it stays in lock

@ELITEkickBOXER 11 месяцев назад

What position is the key stuck in?

@Bigdaddywoowoo321 11 месяцев назад

@@ELITEkickBOXERoff

@keatonehrenberger8391 11 месяцев назад

Having the same problem, mine is stuff in off and will not rotate.

@itsjorgieeSF 10 месяцев назад

Turn your steering wheel and turn key

@jonathonholifield3166 4 месяца назад

@@ELITEkickBOXERhey, you gonn answer that question? Mines stuck OFF, too. So....

@explorer909 2 месяца назад

Q: Are the procedures the same if the ignition key is stuck in the ignition and won't turn?

@carlosmerino9739 27 дней назад

Well explained, thank you very much for this video. I am going to do this work on a sonata that we have at home and that has this problem.🖕

@savannahstewart3999 4 месяца назад

My key is stuck in accessory mode will this still work

@gardena90249 10 месяцев назад

Thanks for the video.

@watchandbeready9502 6 месяцев назад

Awesom video. Can you get a key fob to lock and unlock the car or do you have to unlock it manually? I have a 2009 Sonata

@ELITEkickBOXER 6 месяцев назад

You can get a new key fob; you just have to reprogram it for your car. I don't know the process off hand. There might be other videos on that.

@harrymcknight8275 3 месяца назад

What if the ignition is in the lock position

@shannonbarber6100 Месяц назад

Wat if the key want turn over

@jasonbostic8051 9 месяцев назад

My 2014 Accent ignition switch was vandalized by thieves. I am trying to depress the the little button to release the cylinder but it's not letting go. Does it have to be in ACC mode in order for this to work?? Unfortunately, they damaged it so badly there is no way to do this.

@ELITEkickBOXER 9 месяцев назад

I can't believe someone would do that. That's terrible. The ACC mode is the only position (that I am aware of) where that button can be depressed (due to the shape/engineering of the part). As I'm not a mechanic, you might want to consult a mechanic (at least for guidance on what to do). Is the cylinder stuck in a position that is not ACC?

@Theundisputedtruth 7 месяцев назад

Same here did you figure it out

@JesusSanchez-oc3sf 9 месяцев назад

I have a 2011 Sonata 2.4, what replacement model do I need? Amazon has 81970-3SA00 81250-3SA00. Will it be correct?

@kickkrazycustoms Месяц назад

Hey I am having some trouble with my 2011 sonata it started struggling to drive and sometimes shuts off when I slow down or come to a complete stop

@ELITEkickBOXER Месяц назад

Most likely one of two things: battery problem or alternator problem. Battery: poor connection at terminals and bad battery. I would disconnect both ends of the battery, clean the terminals and reconnect them ensuring they are on tight and you can't pull them off by hand. For the battery and alternator, you can bring it to a local advance auto store and they should be able to check both for you. As helpful as it is, i have some bad experience with that in the past in that their equipment/"method" was poor and was saying the alternator was bad when it wasn't. Though you can go to multiple places for confirmation if you'd like. If it's neither the battery nor alternator, you may need to have a mechanic look into it. Or look in the engine bay for anything abnormal (strange colors on battery terminals, wires with bare copper exposed, etc) You can also purchase this tool yourself: amzn.to/4cDEV7i It allows you to test the battery/alternator and you have it for life. Plus it's pretty easy to use and is on sale $20 off as of this comment.

@Dave-ey3nd 4 месяца назад

Ok what if you have lost the old set of keys so you cant turn the ignition .how do you get it out?

@ELITEkickBOXER 4 месяца назад

I'm gonna presume you have a few options: 1) bring it to a locksmith so they can turn it for you (or youtube it and see if it's something you can do with a lock picking set. 2) bring it to a dealer/mechanic. 3) see (google/youtube) if there is some type of universal key that can enable you to turn it. 4) use some type of brute force/cut off something that holds the switch in place (though i don't recommend this option). 5) i presume no spare keys or anything?

@jessicalaraby2828 6 дней назад

this is the ignition lock cylinder not the ignition switch... it may be hard to find this part at an auto store without the correct part name

@ELITEkickBOXER 6 дней назад

That's embarrassing on my part 😆. Thank you for the info. Interestingly enough, the website that sells the piece calls it the ignition switch. I realize the ignition switch and ignition lock cylinder are two parts of the pie. Nevertheless, I appreciate you bringing that to my attention (and that of others).

@henrypaulsen2303 2 месяца назад

So what you’re saying is the ignition has to work in order to take it out??? What if when I put the key in it just moves freely, no positions to click into.

@ELITEkickBOXER 2 месяца назад

If the ignition is stuck and can't move, which does seem to occur for many people, my guidance ends there as I am not knowledgeable enough to answer that. If it moves free but does not click, as seems to be the case with you, I would think (though I could be wrong) that that would not be a problem. I say this because turning the key and putting it in a certain position allows a pin to be depressed (as shown in the video) and it can only occur if the key is in a certain position. I wouldn't think it matters if the key "clicks in position " only that in CAN go in the position noted in the video. Though if you attempt this, I am curious to know if that is the case.

@elparanoicotimes 4 месяца назад

does the new key open the car doors too? also how to change the keyfob

@ELITEkickBOXER 4 месяца назад

The new key will be cut different than the one you have, so you will need two keys, an unfortunate caveat. The key fob, or any key fob not connected to your car, needs to be synced/programmed to your specific vehicle. There should be some basic steps in other videos/youtube/car repair manuals

@jaykasprick1782 Месяц назад

I ordered the new lock cylinder from Hyundai for my 2012 Elantra, new lock cylinder for the door comes with it...1 key for both door and ignition 👍

@leibyrodriguez2565 9 месяцев назад

hey would this work on a hyundai elantra 2008 my ignition switch is on the steerign wheel column also?

@ELITEkickBOXER 9 месяцев назад

I'm not sure. But look at the website (in the description) and see if you can find the replacement part. Before you order it, see if you can remove the panel/access the ignition switch on your car. If you can, I think you know the answer to your question.

@yourvictor77 5 месяцев назад

Any of you had a problem getting the key out?😢

@flymaki 4 месяца назад

happened to me yesterday trying to figure it out lol 😮‍💨

@explorer909 2 месяца назад

1:02 - I can appreciate you showing everything that needs to be done, but why do you have to disconnect a battery terminal?

@ELITEkickBOXER 2 месяца назад

"Need" may be subjective in all honesty. You are working with the airbag: i personally would rather be safe and not accidentally activate the airbag and have it deploy while you're working on it.

@dennisclary4476 Год назад

Mine has the switch on the column. Is it still the same premise?

@ELITEkickBOXER Год назад

What car and year is it? Honestly, I don't know. I would look for the switch on the 1aauto website and inspect the pictures. You can compare it to the one in the video and go from there. If it's similar or appears the same perhaps it shouldn't be too far off. Maybe the paneling might be slightly differently shaped, but look around to see how it attaches compared to the one i showed

@yourvictor77 5 месяцев назад

Do a need to program the new key?

@ELITEkickBOXER 5 месяцев назад

You do not.

@yourvictor77 5 месяцев назад

@@ELITEkickBOXER thanks

@key2yap13 Год назад

Hello sir I have a 2012 Hyundai n my ignition is attached to the steering column n not to the side like yours is, would it still be the same fix ?

@ELITEkickBOXER Год назад

Is it a Hyundai sonata?

@key2yap13 Год назад

Yessir

@key2yap13 Год назад

@@ELITEkickBOXEReverything was the same I just had to take the bottom cover off instead of the sides thank you for your video ! Very helpful 🫡

@ELITEkickBOXER Год назад

@@key2yap13 Glad to hear it. Hopefully your comment will help others in a similar position. Thank you!

@Nothing2uuu 11 месяцев назад

Did you have to get the key programmed on your 2012 sonata?

@Toastedtonberry 11 месяцев назад

My cylinder is in the steering column

@ELITEkickBOXER 11 месяцев назад

What specific make model year do you have?

@mrsamsung8184 10 месяцев назад

I can't believe nobody's run into this yet on a 2014 era or so Hyundai Elantra /sonata ...if the key gets stuck in the ignition and it's not a shift lock release problem... then disconnect the battery...that's the only way the keys going to come out untill repaired