How to Replace Radiator 2008-16 Chrysler Town & Country

Подписаться 485 тыс.

Просмотров 108 тыс.

50% 1

Buy Now!
New Radiator from 1AAuto.com 1aau.to/ia/1AHCK00033
Overheating is a sure sign there’s something wrong with your cooling system. A leak, rust, or obstructions are all cases that may require a radiator replacement. Install a new TRQ radiator that’s engineered to fit your vehicle. This video shows you how to install one in your 2008-16 Chrysler Town & Country.
• Check here for more videos on the 2008-16 Chrysler Town & Country • Chrysler Town & Countr...
This process should be similar on the following vehicles:
2008 Chrysler Town & Country
2009 Chrysler Town & Country
2010 Chrysler Town & Country
2011 Chrysler Town & Country
2012 Chrysler Town & Country
2013 Chrysler Town & Country
2014 Chrysler Town & Country
2015 Chrysler Town & Country
2016 Chrysler Town & Country
Tools you will need:
• Phillips Bit in a Ratchet 1aau.to/oa/1AXAA00149
• Pocket Screwdriver
• Pry Bar 1aau.to/oa/1AXAA00020
• 10mm Socket 1aau.to/oa/1AXAA00017
• Coolant Funnel Set 1aau.to/oa/1AXAA00116
• Coolant Pressure Tester
• Coolant Vacuum Filler
• Trim Tool Set 1aau.to/oa/1AXXX00006
• Bent Nose Pliers
• Straight Cutters
• Ratchet 1aau.to/oa/1AXAA00016
• Drill
• Gloves 1aau.to/oa/1AXSS00048
• Safety Glasses 1aau.to/oa/1AXAA00343
• Drain Pan 1aau.to/oa/1AXAA00320
Subscribe: / @trq
Check out our playlist:
Chrysler Town & Country 2008-16 5th Gen: • Chrysler Town & Countr...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

5 фев 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@whoopinurdonkey 2 года назад

I don’t often comment on videos BUT THIS video walked me through doing this job perfectly. Saved me a ton of money and time. THANK YOU SO MUCH!

@christopherl4377 9 месяцев назад

TRQ !!! Please keep your high quality video tutorials coming. I would not have even attempted the radiator replacement without your professional instruction. You made the daunting task tangible, especially with the need to remove the whole front assembly. The quality of your production leaves all off the other DIY videos in the dust. I was able to complete the work in a little under four hours. Being able to stop and refrence the video for every step and fastener was priceless. Especially on reassembly where most of us ametuers get to that point of " where does that bolt go again" Helping average Americans to litterly save thousands of dollars-in there moment of need- is heroic in todays economy. Thank you and God bless you.

@arechj 2 года назад

I tried this repair without removing the front bumper cover on a 2010 Chrysler Town & Country 3.8L - and after 30 minute of trying to pinch the bottom power steering bracket radiator clips to free the radiator I gave up and removed the front bumper cover. Extra 10 minutes to remove the front bumper cover but makes removal and reinstallation of radiator 1000 times easier and less ghetto. This video is the best I've seen on RU-vid for this repair! Excellent work and thanks for sharing!!! Perfect video!

@williamkay2247 2 года назад

Tried it as well, this video definitely helped!

@Snowdog216 Год назад

Good info, Thanks! That is the case in a lot of situations. you try to do a repair without removing a part that is blocking access, you waste more time trying to work around the part than it would have taken to just remove it in the first place. On a Trailblazer/Bravada, etc people cut a slot in the fan shroud to remove the radiator, which looks bad if you go to resell the vehicle and takes say 15 minutes. This is done rather than remove 6 bolts holding the radiator support bracket, which allow the radiator to move forward a few inches.

@markkronz919 Год назад

Excellent step by step details. After watching the video, I was able to replace the radiator on my wife's 2009 Town and Country. It took me the better part of a day to complete the job. THANK YOU!!!

@crypticlife3494 Месяц назад

By far the best channel for literally all of my mechanical endeavors I've been exploring lately. This channel has saved me a few thousand easily for my vehicle. From minor repairs to major. Great work!!!

@KaterieDesigns 2 года назад

Awesome tutorial! Thank you for not turning up the speed-some of us need it point by point… 😁

@JordanJSparks Месяц назад

Got it figured, after the first couple hiccups this tutorial helped me step by step, thank you so much for being so detailed for us noobs . Bless you

@businessbywebofficial 3 года назад

Getting ready to take on this job on my 2010 T&C in just a few hours from now. Thanks for the detailed video.

@businessbywebofficial 3 года назад

Done! I'm no mechanic but got this done in about 3 hours start to finish. Thanks again for the instruction video.

@StupidRalph 2 года назад

Good to know. I'm about to do the same now.

@bscommenter Год назад

Excellent video. Saved me hundreds and hundreds of dollars allowing me to do it myself… and I’m not a car guy… I just know enough to be dangerous!

@dougquanstrom8034 3 года назад

Great video. I'm using yours as a front work tutorial, and Motor Cities for rear shots. Your close-up are more accurate representative of items like the clips for the condenser. A+++

@georgeson87 Год назад

You don't need to remove the bumper. You do not need a pry tool to remove the rubber bumpers or grease to put them back on. It took maybe 20 minutes to do without removing the bumper and not using an air ratchet to strip out the bolts in the plastic.

@carlapinheiro4834 2 месяца назад

Thanks for this detailed tutorial! Helped me and my husband a lot!

@dcoker1234 11 месяцев назад

Thanks for this video. I just completed this on my wife's 2016 Chrysler Town & Country. The whole job took roughly 4hrs due to me having to flush the engine twice to get all the stop leak out of the motor. I got everything from rockauto (the TYC Radiator PN#13064 $111.00, Motorcraft VC-1 engine flush $11.00, and VALVOLINE 877981 G30 Pink OAT Coolant 3 x $16.74). Whole thing cost me $222.13 w/ shipping. The radiator was a perfect oem replacement.

@TRQ 11 месяцев назад

+David C Thanks for watching our video! 1aau.to/m/Shop-TRQ

@JordanJSparks 2 месяца назад

super thorough! Thank you buddy

@lappinrappin 2 года назад

I’m a competent diy-r, I have a good suite of tools (minus something to deal with those hose clamps) and the job took me 3 hours start to finish. I wasn’t in any rush to get it done so 2 hours is possible for a first timer with the right tools. Those electrical plugs gave me so much trouble until I did the first one. It doesn’t help when the vehicle is old and they don’t slide off easily. The “tab” that you reveal when sliding the red portion back is the gray step piece. You have to push a larger flat head onto the gray part and it barely hinges. Then force the connector off. Once you do one the rest are easy- but when you don’t know exactly what you’re trying to accomplish it is frustrating. Some of the bolts are really tricky to get to so be prepared to get creative unless you have the perfect tool at the ready like he does in the video at each step. It goes back together in half the time it takes to remove it.

@timtillotson521 Год назад

Thanks for the video my radiator just got a leak just a few hours ago and you are going to save me a lot of money your video was awesome

@limavadyvalley Год назад

You did good. Thank you for the all the info and actual video of you doing the work in real time.

@Snickls 2 года назад

Thanks for the show. Gotta take the bumper cover to get to the two bottom CONDENSOR clippies...👀🎉 Darn. Thanks again.👍

@Corneli-l8r 7 месяцев назад

This video was satisfying and educational at the same time 😁

@Iam_Maya11 Год назад

Pretty awesome illustration step-by-step. Great video.

@jjparrish Год назад

Nice detail and narration. Thank you

@wiljr8931 Год назад

Great video and the guy is very handy. I am sure if I try to do that my car will never run again.

@AbslutZr Год назад

The coolant coming out of the hoses and radiator was pink, but the coolant in the reservoir was greenish. 😐

@ranwiz3327 2 года назад

Very nice video guide to this repair - highly recommended . I'll be sure to look for TRQ videos in the future. Couple of comments on this video. My vehicle ==> 2010 Town and Country (which I love) • Definitely take off the bumper. • I did NOT have to unclip the fan electrical connections. I tried to take one off - but they are stuck together right good. Seemed simpler to disconnect the fan shroud with elect connections in place. Was easy. • Missing from tutorial: at bottom of A/C condenser (in front of radiator) two 10mm bolts, one each side need to disconnect the A/C lines that cross at the bottom. • Actual 'yank' of the radiator did not release it. Turns out the rubber bottom supports were well stuck on. Additional yanks: the radiator came loose, but rubber remained on the frame. New radiator fit right back into them, No Problem.

@lynnfid5582 9 месяцев назад

Nice work! You make it look so easy!

@donniemcgowen4693 2 года назад

Did my Volkswagen Routan2009 which is made by Chrysler with Volkswagen badges. Video is extremely helpful. Done in 3 hours!

@mronemanband1 Год назад

Get rid of it everything chrysler touches is junk and falls apart !

@jaydeguzman764 3 года назад

Thank you for the video, help me alot before I did the job. And I did bought the radiator from 1a auto. Thank you for the other videos as well!!! Stay safe stay well!!!

@TRQ 3 года назад

+jay de Guzman Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@widmaerarmand7108 3 года назад

@@TRQ aaaaadaààas was

@PearComputingDevices 3 года назад

Technically you don't need to remove the fascia, but you will then need to be fairly flexible. Working around that isn't for the unfit for sure. But I admire your commitment to quality.. very nice job.

@BMJAUDI 3 года назад

By facia do you mean the front bumper cover?

@williamkay2247 2 года назад

The bottom ones on my VW wasn’t a clip but a slot, they must of changed it for the bottom clips shown in the video.

@BigDoggTKO 5 месяцев назад

Thank you for the excellent video. You saved me a lot of money!

@bigcountryjd Год назад

Did it twice using this video as a guide.

@thedoolangrouprealestatese6928 4 года назад

Excellent video

@TheGeno2001h 2 года назад

Thank you your video helped me a lot thank you

@victorortega9924 2 года назад

Omg thanks my friend I did it god bless you

@soniarondonlucky8263 2 года назад

Good job, am impressed

@BuffaloEskate 3 года назад

How did you get the last clip out in the bottom left of the radiator... (Where you say... This one is a bit harder... And then just cuts to another part?!?!??

@edwinocampo2600 2 года назад

Brother...thank you. I give you *****..you know how to teach...thanks alot

@matthewjennings4622 Год назад

Thank you for this video. Using it as a reference I was able to change mine in 4ish hours (slow and steady) I’m not a confident mechanic and this was the first real big project I did. Thank you!!

@hankmoody5514 Год назад

Well, that took about 3.5hrs. It wasn't even that bad. Thanks for the tutorial

@TRQ Год назад

+Hank Moody Thanks for watching our video! 1aau.to/m/Shop-TRQ

@KL-xx6il 4 года назад

Best video for this work on RU-vid.thank you. Well explained.

@dialtome 11 месяцев назад

Brother. I love you man. Thank you. Save lots of money. I guess. Change my car radiator my self. 👍

@TRQ 11 месяцев назад

+dialtome Thanks for the feedback! 1aau.to/m/Shop-TRQ

@trayquariusbrowniiiesq.3001 Год назад

thanks for helping me fix my verichle

@jasper_0123 Год назад

Thanks nice job

@mm242099 3 года назад

What size hose/tubing did you use on the petcock drain nozzle?

@Steveh112 Год назад

Thanks for posting the video. I had replaced the radiator on my 2005 Town and Country a couple years ago and it only took about an hour and I didn't even need to watch a video. So I attempted to replace the one in my father in law's 2008, and what a difference in difficulty level 3 years newer! I never would have expected to have to take the whole front end off. Also I was working outside in 18 degrees. Worked on it 3 hours the first day and almost 6 the 2nd, but I finally got it in. Never would have finished the job without the excellent detail in your video. It's -3 today so I'm happy to have finished it yesterday. I do have a couple questions: First, one of the rubber cushions fell off that go on top the right hand tab on the top where the clip that holds the hood latch cable sits on and I didn't find it until this morning. Is it worth taking the top piece back off to put it in? And secondly, what is the trick to get the tabs on the bottom of the condenser into the clips on the radiator? On mine, the top snaps in, which was easy to release, but the bottom just sits in L shaped clips. It was very difficult to lift the condenser up high enough to clear the top of the clips and get it seated in there because the radiator kept wanting to lift with the condenser. I didn't think I used any excessive force and I didn't pry or anything, but the clip on the right side broke right off of the new radiator. It's sitting in the left clip and securely snapped in on both sides of the top, so it's not going anywhere. Just wondering what I could have done to make that step easier? I wasted close to an hour getting it in place. Typically, how long do you think this job should take? Thanks again, one of the best instructional videos I've ever watched.

@seatime674 2 месяца назад

On the '08-16 is there a bleeder screw for coolant air bleeding??

@yngsol 2 года назад

Can I use my old radiator cap for this?

@leahb8181 3 года назад

I ran the van with the heat turned all the way up and was baking. The fan never actually turned on even when the thermostat was at the the halfway point. I had to turn the ac on and all the way cool for the fan to kick on.

@willardfasto4494 2 года назад

Anyone know the torque spec on the bolts?

@stephanwashington7172 2 года назад

What type of funnel did you use where can I buy this from?

@bambam23-vi1kl 8 месяцев назад

Easier to do if you have a recovery a/c machine, The pass side a/c lines make it a tight fit. Removing those lines make it easier. By the book.

@aaronwagner8904 2 года назад

Has anyone used this procedure on a VW Routan? I know they swap badges with the T and C, just want to be sure I cover bases before starting.

@aaronwagner8904 2 года назад

I answered my own question. It's all the same. Great video!

@BuffaloEskate 3 года назад

On the "vericle"!!! 😂

@TRQ 3 года назад

+Buffalo Eskate Thanks for watching our video! 1aau.to/m/Shop-TRQ

@BuffaloEskate 3 года назад

@@TRQ just had the guy at the shop tell me... "You got a hole in radiator and need to have it replaced so I replaced the radiator with a brand new one and come to find out it was just the hose or a $3 clamp... But I did not realize until I already replaced the entire radiator which is not too easy when HAVING NO LIFT AND NO POWER TOOLS.. BUT GIT THE NEW ONE IN JUST TO SEE THE SAME LEAK AND FOLLOW IT TO THE HOSE AND CLAMP!!! WHAT A WASTE OF 2 DAYS... AND $300 FOR THE RADIATOR AND COOLANT!!! UGH

@BuffaloEskate 3 года назад

Yes I found it to be informative and will mention your channel in a video or two on the channel!!! Thanks for the time put in to put the video up brotha!!!

@williespoonemore3392 3 месяца назад

Ya yep , easier said than done . Bottom line with two elbows do you fasten them to the windshield

@marcusjackson271 2 года назад

What is that device he used to create the negative pressure in the system and then refill. I always have an issue with getting air in my cooling system.

@mipassionanime 2 года назад

You don't need that system that is just for show I just put plain water on my radiotor

@Snowdog216 Год назад

I think it was basically this device. I have never used one, but I've seen them used in other videos. And on some vehicles they are required as the system will not "burp" out the air pockets. It does check that the system holds pressure and can eliminate/reduce the burping process. The reviews have some good info/user experience. **** Sold at Harbor Freight, SKU 64985, Brand MADDOX, Cooling System Test and Refill Kit

@JordanJSparks Месяц назад

All the tabs were missing on the bottom of my van, the hiding bolts on the sides just broke off on both sides , couldn’t even turn a millimetre they just broke right off, on one side the bolt busted in half, on the other side the metal was rusted and just turned to dust. I got the red tabs to move for the electrical but can’t see which tab inside you’re talking about. Couldn’t find any assemblies for the fog lights on mine. There is nothing there on my vehicle and no electric wires there whatsoever. And nothing with a green tab. Overall you were super thorough in this video but it doesn’t seem to match my 2009 grand caravan. Unfortunately.

@user-yb1ct4mc3o Год назад

is this a 3.6 engine?

@ADHDvato86 Год назад

The vehicle or virehicle?

@theresawilliams1323 3 года назад

Will this work for 09 Aspen?

@TRQ 3 года назад

+Theresa Williams We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

@JordanJSparks Месяц назад

I’m already lost on step one: I don’t see anything that looks even remotely similar to these ‘Fog Light Assemblies’

@JordanJSparks Месяц назад

My bumper also doesn’t have push clips :/

@jonathanm505 7 месяцев назад

Verichle is halarious

@sly2392 Месяц назад

half of what he takes off the vehicle really is not needed to remove the radiator off a chrysler mini van.

@ADHDvato86 Год назад

When you get paid by the hour ..

@andrewsullivan1292 3 года назад

Veerhicle

@keithbenson9968 2 года назад

I see why the install is over $300 (cad)..

@fangdanian Год назад

must be nice working on new sh#t.

@hansyvaldez6211 7 месяцев назад

Really? Cars designers couldn't make it more difficult

@charlescoveleski1653 4 года назад

Way to much removal this is a bad mechanic ! Much easier to do without destroying this car !!

@samuelsheffield1459 3 года назад

Chrysler calls for the grill/bumper removal. He is following guidelines, not guessing as he goes. More removal= less chance of breaking another part trying to remove an originally broken part.

@BMJAUDI 3 года назад

Charles Coveleski, what the hell are you talking about? Nothing was “destroyed”

@leahb8181 3 года назад

I didn't remove the grill/bumper and got it done (diy). Nothing was broken.