Тёмный

How to Replace Rear Brakes 2004-12 Chevy Malibu 

TRQ
Подписаться 483 тыс.
Просмотров 40 тыс.
50% 1

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1APBS00078
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2008-2012 Chevy Malibu.
• Check here for more videos on the 2008-12 Chevy Malibu: • Chevy Malibu 2008-2012...
This process should be similar on the following vehicles:
2004 Chevrolet Malibu
2005 Chevrolet Malibu
2006 Chevrolet Malibu
2007 Chevrolet Malibu
2008 Chevrolet Malibu
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Pry Bar 1aau.to/oa/1AXAA00020
• 19mm Socket 1aau.to/oa/1AXAA00043
• Brake Caliper Hanger 1aau.to/oa/1AXAA00084
• Brake Caliper Piston Rewind Cube Tool 1aau.to/oa/1AXAA00061
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXAA00015
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels 1aau.to/oa/1AXSS00035
• Rust Penetrant
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Jack Stands 1aau.to/oa/1AXAA00065
• Wheel Chocks
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Chevy Malibu 2008-2012 7th Generation: • Chevy Malibu 2008-2012...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

4 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 12   
@TRQ
@TRQ 3 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@emilycruz6325
@emilycruz6325 3 года назад
Pushing down is not necessary, you can just twist it ,
@joecnc3341
@joecnc3341 2 года назад
Liked-Subscribed-Notified. Great video
@jessicagamboa1192
@jessicagamboa1192 2 года назад
What is that l little box called that he was using where the caliber is ?
@charlesthurston5172
@charlesthurston5172 9 месяцев назад
I have an 07 and the piston is jammed up and won't move on both sides I broke a c clamp trying to reset the piston
@allentony86
@allentony86 2 года назад
Great video. Thank you
@SpiderCraftNation
@SpiderCraftNation 3 года назад
Thank you!!!!!!
@MrOnering
@MrOnering 2 года назад
If the slide pins were mixed up. Which one goes where. Top or bottom.
@kathyboehnlein1367
@kathyboehnlein1367 8 месяцев назад
Well done!
@lloydalcon5097
@lloydalcon5097 Год назад
Does the plunger have to go all the time way back on calliper
@willferrmail
@willferrmail 7 месяцев назад
Thanks!
Далее
How to Replace Front Brakes 04-08 Chevy Malibu
9:17
Просмотров 199 тыс.
ЗЕНИТ - РОСТОВ: обзор матча
01:03
Просмотров 186 тыс.
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,4 млн
Lool 🤣💃🏻 BMW i4 ❤️
0:14
Просмотров 5 млн