How to Replace Rear Brakes and Caliper 08-17 Honda Accord

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,5 млн

Просмотров 288 тыс.

50% 1

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABF...
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old front brakes. This video is applicable to 08, 09, 10, 11, 12, 13, 14, 15 Honda Accord.
This process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oiv/1AX...
• Phillips Head Screwdriver 1aau.to/oiv/1AX...
• Complete Metric Wrench Set 1aau.to/oce/1AX...
• Complete Metric Socket Set 1aau.to/odv/1AX...
• Needle nose pliers 1aau.to/oa5/1AX...
• Needle nose pliers 1aau.to/oa5/1AX...
• 1/2 Inch Breaker Bar 1aau.to/oao/1AX...
• Ratchet 1aau.to/ojd/1AX...
• Socket Extensions 1aau.to/oig/1AX...
• Torque Wrench 1aau.to/ofe/1AX...
• Anti-Seize Grease
• Brake Parts Cleaner
• Bungee Cord
• Rust Penetrant
• Drain Pan 1aau.to/oaJ/1AX...
• Floor Jack 1aau.to/ocx/1AX...
• Jack Stands 1aau.to/ock/1AX...
• Wire Brush 1aau.to/oas/1AX...
Subscribe: / @1aauto
Check out our playlist:
Honda Accord 2008-2012 8th Gen: • Honda Accord 2008-2012...
For More Info visit us at 1aau.to/h/sC/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 145

@1AAuto 4 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@runcoach26 Год назад

Very well done; I like it when tool sizes are mentioned during the use of said tools, that bit of information makes it the most thorough DIY video in my humble opinion.👍

@cadleo 2 года назад

So, I just changed all my calipers, rotors and pads and bled my fluid on my 09 Accord and all Ive ever done is change my own oil. Ive never even seen someone do brakes before besides on RU-vid. It went great and your video was extremely helpful to the whole process. Thank you so much!

@224flash 3 года назад

I've always been a do-it-yourself guy (mainly home and auto body) but NEVER tried tackling brakes. Well, following your video I replaced rear pads, calipers, rotors and bled system. Took me at a newby pace most of day but saved a lot of money. Thanks again, much appreciated.

@ChmodX 4 года назад

Just wanted to say nice job, there wasn't a single question unanswered as you did this(torque, etc). Video is clear and you explained everything very well. THANK YOU!

@meyersmichael975 3 года назад

Wrong he forgot to tell you the first step take the cap off the brake fluid

@jtprice8775 4 года назад

Just an FYI, if you live in an area with road salt and long winters it is a good idea to add anti-seize to the mounting screws, if you choose to use them again. It really helps the next time you need to take them off.

@silverclouds3725 Год назад

Guys, this was a solid video. Props for the detailed narration by the mechanic and props to the camera guy for going the extra mile to give us the best view possible!! Good work!!!

@user-oq6hz8mq6i 11 месяцев назад

I honestly looked at the video length and said ‘oh man’..but it wasn’t just filler. All four done with no problems..thank you!!

@Beantownreview 4 года назад

I did as described last summer for the passenger side. Come this Saturday, I'll repeat this exercise for the driver's side. One thing I learned (yesterday) is that when you replace one side, you should replace the other as well. Do them in pairs. Don't wait a year like I did.

@1AAuto 4 года назад

+Beantown Review Thanks for the tip!

@petecampa Год назад

🤦‍♂️...

@MoeDesigns 2 года назад

Perfect, I will have this the laptop next to me in the garage when I change my brakes lol. I've got a 2008 Honda accord, just waiting for the weather to get warmer (Canadian weather is brutal)

@norb2464 3 года назад

The best detailed info on the internet on how to change a caliper and rotor on a 2014 Honda Accord. Great job!

@spaz5310 5 лет назад

This video legit saved me 500 dollars because the labor costs on simple things in Columbus, OH are wildly overpriced. Thank you very much. I'll share your channel with people I know that need this kind of help.

@1AAuto 5 лет назад

Thanks for checking us out. 1aauto.com +Spaz Derek

@jat102491 5 лет назад

I’m near there too and I agree it’s outrageous for labor costs

@allisonlizarraga6348 5 месяцев назад

Tky , you are a good teacher

@1AAuto 5 месяцев назад

+@allisonlizarraga6348 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@molynn1669 4 года назад

Great video, I'm tackling this next week on my '16 Accord. Honda wanted $470 to replace RR caliper because ebrake has siezed, then another $450 to replace rear brake pads and rotor. The front would be another $480. Over $1500 for brakes...no thanks. Bought all the parts for $250.

@1AAuto 4 года назад

+Michael Morrison Thanks for checking us out! Good luck! 1AAuto.com

@MrSupernova111 3 года назад

That's insane!!! I recently bought a four set of performance rotors (perforated) and brakes for about $300. The caliper can't be more than another $100-$200. You can do all of this in 2-3 hours.

@garybrooks2907 4 года назад

Fantastic video guy, best I’ve seen for explaining things, great camera shots and every step well covered, I wasn’t going to change my own caliper but I know feel pretty confident in doing so.

@1AAuto 4 года назад

+Gary Brooks Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@steveslivinski8182 Год назад

Great video. The only thing I did different was to prefill the caliper with fluid. Really reduced the amount of bleeding.

@1AAuto Год назад

+Steve Slivinski Thanks for the tip!

@pindiwal4717 5 лет назад

For first timers, rear brakes are different to front. Front brakes you can leave calipers on the rotors whereas, rear brakes, you have to take the entire caliper off. Keeping V strings on is a pain.

@MrSupernova111 3 года назад

You'll also need the special tool to compress the caliper piston as it needs to rotate to compress. There is also a specific way that it aligns to the brake pad.

@clever41504 5 лет назад

Thank you for the how to videos, will be buying from you guys soon

@1AAuto 5 лет назад

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +clever41504

@matase 4 года назад

If I'm doing piston and caliper replacement on the driver side rear, so I need to bleed the caliper/piston on the passenger side first and then go to the other side? I've changed break pads many times and rotors once, but never had to replace caliper before.

@fdbeast20b58 4 года назад

No way in hell that those rotor screws came off that easily, 99% you will need a impact driver to knock them out and this is coming from a honda master tech here.

@nottelling4828 4 года назад

I just bought my son a 2008 Honda Accord, and during the test drive I noticed a slight wobble when braking, so I plan on changing all the pads and rotors. I do not want to hear about stuck rotor screws... I had a 2014 Camry with the rear rotor screws practically welded to the rotor. I even tried drilling those bad boys out, unsuccessfully. Just called it a day and took it to the shop for the guys to mess with it. They said they had to torch it off (heat it up before twisting it off I guess)

@andreyv1 4 года назад

I had to drill mine out with a Cobalt drill bit. lol

@fdbeast20b58 4 года назад

Andrey V Lol I bet they can be a pain in the ass sometimes

@andrewcastleberry4921 4 года назад

I used a screwdriver on one of mine

@geo745don 4 года назад

Maybe he's in sunny Arizona

@alouiciousjackson5812 4 года назад

You guys sometimes do things that I find really questionable. For one thing, you can't clamp off old brake hoses. You will destroy the inner lining. It's far better and cleaner to simply insert a rubber port plug into the banjo end. An assortment of them can be found at any parts store for $5.

@wymi 4 года назад

I use a rubber valve stem for that.

@123clis321 Год назад

Shade tree mechanics. Love 'em.

@thurm101 2 года назад

Followed this video. It really helped me complete the job. Thank you.

@AbdullahAwamleh 3 года назад

Great video. Helped immensely with my install. However, I’ve read elsewhere that the torque spec for the caliper slide pin bolts is 17 ft-lbs, not 10 as stated. Should I be worried about this falling apart? Also, some other comments say that we shouldn’t clamp the brake line hose. Did I damage it by doing this?

@meyersmichael975 3 года назад

This guy the front slide pin torque to 37 ft-lbs hot the hell do you go from 37 to 10 in the back??

@battlehrfred 4 года назад

Excellenttttt 100-100 well done,full explanation professionally !!

@1AAuto 4 года назад

+battlehrfred Thanks for checking us out! 1AAuto.com

@donh215 5 лет назад

Now where have I heard that background music before?

@adamon2s572 4 года назад

love the quality of your guys videos, also them mutton chops thicc boi!

@jboyce6140 Год назад

Great demo, thanks

@Gino20202 4 года назад

I've never seen or heard of someone spraying the friction side of the brake pad (or the pad at all) with brake cleaner. I've only sprayed the calipers to remove the oils used in shipping. I guess that's ok to do?..

@erickelley9888 3 года назад

the brake cleaner evaporates with no residue, it just helps dissolve oils and grease that could've gotten on the pads that could make them slick when you fist use them

@rasulsmith7147 4 года назад

Great Video. Very informative and on point.

@val12628 4 года назад

Excellent tutorial video

@1AAuto 4 года назад

+En Ir I Thanks for checking us out! 1AAuto.com

@Vertikala-pc5ig 9 дней назад

Do you need to bleed all wheels or just that one? Thank you

@manickavelganesan6576 2 года назад

Hi, you didn't mention refilling the reservoir with the brake fluid before you bleed the brake calipers. People follow exactly what you do. Please add that point before you bleed and possibly show where it is and how much they need to refill.

@divinescience 11 месяцев назад

Great video

@justonemore9217 6 лет назад

Thanks brother helped me a ton

@1AAuto 6 лет назад

+just one more Thanks for checking us out. 1aauto.com

@secretsquirreladventures7778 2 года назад

First video a step was skipped. There are 4 metal “spring” clips never installed!

@MrSupernova111 3 года назад

Pretty cool! I thought you weren't supposed to clamp brake hoses?

@gebsvesonsin6432 3 года назад

You are AWESOME!! Thank you

@dilshah 5 лет назад

Excellent video . Thanks

@1AAuto 5 лет назад

+dilshah Thanks for checking us out. 1aauto.com

@holmzcat8493 5 лет назад

Thanks for putting this up. Had to watch a ton of crappy video until. I came across yours

@1AAuto 5 лет назад

+Vaping Tech Jay Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto

@brianm.595 5 лет назад

I have never seen those rotor screws come off so easily... You almost always need penetrating oil and an impact driver/hammer to get them off. I have had to drill one of them out in fact.

@andrewcastleberry4921 4 года назад

I used a Makita 18v impact on my 2001 accord and unbelievably they came out

@geo745don 4 года назад

@@andrewcastleberry4921 How do you use a 18V impact on Rotor screws

@ifensler 3 года назад

My impact worked for a couple. Had to drill out 3 others. Don't even bother putting them back in

@reivalentin 2 года назад

great video, i was wondering, did you just bleed both back tires? all four? or just the one?

@Hapshaw 2 года назад

Arn't those break lines lined with metal to where you shouldn't crimp them? I'm about to do this on my 2009 Honda but wanted to be sure of the lines not having a inner metal lining that would be permanently crimped if that clamp is applied.

@glennbrown9178 2 года назад

Excellent!

@cherylgaston479 5 лет назад

Very detailed nice video

@geoff4705 2 года назад

Is it safe to pinch the brake hose? I have read that hydraulic hoses have some structure, and you may damage it internally.

@Hapshaw 2 года назад

Im trying to find this out myself , was told the same thing about those lines

@virtusetglorie Год назад

Not safe

@Sunsetflorida1 3 года назад

Great video. Thanks for sharing.

@1AAuto 3 года назад

+Jeffrey Parshall Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@redsuxh8r131 2 года назад

I have 2016 accord with 75k. One rear caliper went bad, do you recommend to change both?

@glennbrown9178 2 года назад

Should you have squeezed off brake line near caliper? Left cap off brake reservoir during work? Just wondered.

@daveclark8337 Год назад

If you pull the cap off the reservoir while removing the caliper, the fluid would drain out faster from the line because you break the vacuum.

@sickness700 5 лет назад

Great video thank u

@1AAuto 5 лет назад

+sickness700 Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

@Letitflow1-1-1-1 Год назад

I changed the rear drivers side caliper but it's not engaging. What did I do wrong? Air in the system? Brake pedal has zero pressure

@tsj4341 3 года назад

Why do you tear out the slide pin boot at the same time as the slide pin? The pin is designed to hold the boot in place. If you remove the pin first, the boot comes out easily and is not destroyed. It can be used again many times if it is not cracked.

@C7eeN 2 года назад

Should you not be clamping the brake hose as you did? Couldn't it damage the hose?

@andreyv1 4 года назад

What to do if parking brake doesn't work (doesn't hold car on hill and is very easy to raise)? The only thing i've done to the car recently is changed my rear brake rotors/pads and I believe that's when my parking brake stopped working. Is there a way I can get it to work again? thank you

@MrSupernova111 3 года назад

You probably installed the backside brake pad incorrectly. It needs to line up a specific way with the caliper piston so you're E-brake works.

@BA-gn3qb 3 года назад

While I agree with 80 ft lbs of torque on the bracket bolts, everything I have read on the original Honda caliper slide bolts show 17 ft lbs. Is yours only 10 due to the new manufacturer specs?

@georgedori51 4 года назад

the screws holding the rotor on do not have to be re installed.

@1AAuto 4 года назад

+Jesus Saves Thanks for the feedback!

@MrSupernova111 3 года назад

You can buy new ones like I did. Still, its a good idea to lubricate them before installing them to save headaches on the next time.

@MicMurphy1981 6 лет назад

Thats why i buy all my car parts for all out cars from here they will always get my business

@1AAuto 6 лет назад

+King Murphy Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@boostednick 5 лет назад

I'm assuming you'd also have to top off the master cylinder as well at the end if you bled alot of fluid out? Anything special that needs to be done for that? Or just pop the cap off, top it off, and you're done?

@swaggerjacker1482 5 лет назад

Probably already done but just too it off

@rigobertoguevara1860 6 лет назад

Very nice video

@leilanigonzalez3459 6 лет назад

Just finish the job and realized I put the left caliper on the right side and the right on the left. Seems to be working fine. Does it matter which side I put the caliper on? The only difference I can see is the emergency brake is mounted on the top instead of the bottom

@mustangjoe8352 5 лет назад

You will have some trouble when it comes time to bleed the brakes if you ever need to do that your bleeder screw is now on the bottom instead of being on the top which will make it difficult

@mustangjoe8352 5 лет назад

I did the same thing and have to switch them back over because of that bleeder screw won’t bleed properly next time you need to

@genespleen 5 лет назад

This will mean that your bleed bolts will be towards the bottom of the caliper, rather than near the top. Bleeder bolts are always oriented at the top of the caliper, so that air can be bled. What you've done (and it's not an uncommon error) will make bleeding the brakes in the future unsuccessful, since it will not be possible to push entrapped air out of the caliper.

@alanarcher5954 4 года назад

I have a 2010 Accord Crosstour, My calipers don't have that x that lets you tighten them down, plus the emergency brake application doesn't seem to exist. Otherwise it look like a good video!

@cadleo 2 года назад

Great video, but Honda recommends this order for Accord 09 - 1 Left front 2 Right front 3 Right rear 4 Left rear. I assume its because the ABS unit is more rear mounted.

@natewebs Год назад

Excellent video but the brake line clamping was a bit sketch. A plug would likely be better.

@rickyhudgins5064 2 года назад

Had problems with pads because of shims.do you really need the shims?

@popalot711rb 2 года назад

What did I do wrong if I followed all step except bleeding. Break lights won't go off and pedal keeps going straight to the floor with no pressure

@davidhollfelder9940 Год назад

On mine, the parking brake cable will not allow caliper release/remove .. cable short/not enough slack.

@popalot711rb 2 года назад

Do u have to bleed breaks after putting new break calibers on or is this something u wanted to do?

@daveclark8337 Год назад

You must bleed them. See how much brake fluid he drained out of the old caliper at the 8:45 mark? That much new fluid needs to be pushed back into the new caliper and you have to get the air out of the lines. Also, if your brakes are so old or neglected that calipers need to be replaced, the existing brake fluid is probably old and shot too, so you might as well flush it through until the fluid runs clear.

@luckycharms1254 4 года назад

Hi nice video... can I used the same method on my 02 accord or is it’s different way to do it ?

@1AAuto 4 года назад

+Lucky Charms We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task.

@casperthesavage22 4 года назад

Always awsome vidz

@JaZu 5 лет назад

Interesting, I thought the drag reduction pins were required...

@byronsito5048 5 лет назад

Jacob Zuniga I noticed that two he didn’t put the pins in to separate the pads

@wymi 4 года назад

OE pads and a few aftermarket pads come w the holes for using the drag reduction pins. I always use them. This video lost me when he put lube on the pad ends, that will attract dust and dirt.

@popalot711rb 2 года назад

What did I do wrong? if I'm done and pressing break and pedal keeps going to floor and having no stiffness.

@coythibodeax3185 2 года назад

What about the brake line my Honda has a brake line connected to the brake bracket????!!!?

@jakef311ify 6 лет назад

I did this to both rear calipers on an 08 TL.. after bleeding the brakes multiple times I had great brake pressure. Then, I started my car, the pedal went to the floor with ease. Is there something I'm not doing? Does something have to be "reset"? Help!!

@chooseanameforme888 6 лет назад

This happened to me. I turned on the car and bled them again and it was good to go.

@bcuz8998 6 лет назад

You need to run engine during the bleed process

@thatboisniper2664 5 лет назад

sounds like the master cylinder

@rhdtv2002 5 лет назад

13:43 - do NOT screw back those Honda Rotor screws - throw them out. The video is great otherwise

@MrSupernova111 3 года назад

Buy new ones and lubricate them.

@lennydemers77 3 года назад

You guys do such a great job with the video and explanation - well done! #RICKGREENFORGOVERNOR!

@filibertovargas8354 3 года назад

That's a really good video nice and clear..

@popalot711rb 2 года назад

I have 2000 honda accord ex coupe 4cly

@mikhailyuren6781 9 месяцев назад

How come you don't press the piston while car is on is 1000 times faster to retrieve both pistons it won't hurt nothing it doesn't even need to bleed it

@JuanMorales-ks4ll Год назад

where did you get those parts

@nadeemmohammed4770 5 лет назад

Any link to the parts? Need rear caliper for dc2/db8 i did a swap from 4 to 5 lug on my DA7 integra.

@1AAuto 5 лет назад

Thanks for watching! What year is your Integra? +Nadeem Mohammed

@nadeemmohammed4770 5 лет назад

I have a Jdm da integra. That's 90-93 Acura integra in America. So I swap 4 to 5 lug complete. So I believe it's the dc2/db8/ek9 5 lug complete set up I have

@1AAuto 5 лет назад

Thank you for contacting us back. If there have been modifications done to the vehicle we are unable to guarantee the fit and function of any of the items we carry. We apologize for any inconveniences and thank you for checking us out! +Nadeem Mohammed

@mikediodato 9 месяцев назад

How about the fact that he bleeds the brakes wrong and there is no pin to line up on the damn brake pads.. also the caliper was not seized up .. But aside from that was a decent video

@greenh7181 3 года назад

I thought you bleed the caliper farthest from the abs module.

@ziDeCePTiioN 4 года назад

What tool were u using on bleeder valve ?

@MrSupernova111 3 года назад

Its a plastic clamp plier. You can search for it on Amazon. However, I've been told that brake hoses should not be clamped as they are rigid hoses and clamping them will damage them unlike regular rubber hoses.