How to Replace Rear Driver CV Axle 2002-2005 Ford Explorer 

Buy Now!
New CV Axle Shaft from 1AAuto.com 1aau.to/ib/1AACV00252
This video shows you how to install a rear driver CV axle on your 2002-2005 Ford Explorer. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2002 Ford Explorer
2003 Ford Explorer
2004 Ford Explorer
2005 Ford Explorer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Pry Bar 1aau.to/oa/1AXAA00020
• 18mm Wrench
• 10mm Socket 1aau.to/oa/1AXAA00017
• 19mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• 36mm Socket 1aau.to/oa/1AAST00006
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
• 3/8 Inch Drive Ratchet 1aau.to/oa/1AXAA00015
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Cloth Rags 1aau.to/oa/1AXSS00035
• Copper Anti-Seize
• Liquid Thread Locker
• Center Punch 1aau.to/oa/1AXAA00055
• Drain Pan 1aau.to/oa/1AXAA00320
• Hammer 1aau.to/oa/1AXAA00091
• Rubber Mallet 1aau.to/oa/1AXAA00413
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото