Тёмный

How to Replace Rear Strut and Spring Assembly 2002-06 Toyota Camry 

TRQ
Подписаться 465 тыс.
Просмотров 87 тыс.
50% 1

Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ia/1ASTS00650
TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. This video shows you how to install new reliable TRQ struts in your 2002-06 Toyota Camry.
• Check here for more videos on the 2002-2006 Toyota Camry • Toyota Camry 2002-2006...
This process should be similar on the following vehicles:
2002 Toyota Camry
2003 Toyota Camry
2004 Toyota Camry
2005 Toyota Camry
2006 Toyota Camry
Tools you will need:
• Pry Bar 1aau.to/ogS/1AXAA00020
• 12mm Wrench 1aau.to/ohi/1AXAA00010
• 19mm Wrench 1aau.to/ohi/1AXAA00010
• 10mm Socket 1aau.to/ouQ/1AXAA00017
• 12mm Socket 1aau.to/oys/1AXAA00015
• 19mm Socket 1aau.to/okP/1AXAA00043
• 21mm Socket 1aau.to/okP/1AXAA00043
• Locking Pliers 1aau.to/obq/1AXAA00139
• 3/8 Inch Air Impact Gun
• Torque Wrench 1aau.to/opN/1AXAA00044
• Brass Punch
• Hammer 1aau.to/ogZ/1AXAA00091
• Rubber Mallet 1aau.to/oav/1AXAA00413
Subscribe: / @trq
Check out our playlist:
Toyota Camry 2002-2006 5th Generation: • Toyota Camry 2002-2006...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

11 янв 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 55   
@TRQ
@TRQ 2 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@sylvestersere5440
@sylvestersere5440 2 года назад
Do you ship orders to Papua New Guinea?
@cleandiaper
@cleandiaper Год назад
Do NOT use vice grips. There is a metric Allen wrench you can place in the middle of the nut to prevent it from moving. Using grips could strip the threads.
@DooWops4U2
@DooWops4U2 Год назад
This is by far the best video for this repair I have watched . I feel more comfortable doing this on my own Thanks for your help and demo.
@ronaldwalker6114
@ronaldwalker6114 Месяц назад
I use 20v DeWalt half inch drive impact , being a mechanic for 48 years once batt. operated tools came out that's all I used and still do . No need to have a compressor at my house !
@Ed-eq8ui
@Ed-eq8ui 2 года назад
Wow, that was a clean, crisp presentation. Well done!
@filosoper
@filosoper 2 года назад
Thank you! I ordered the TRQ strut assemblies for both the front and rear and they are OEM quality. They work great! And this video helped a lot too!
@TRQ
@TRQ 2 года назад
+Allan Rimban Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
@SergioLopez-so6ph
@SergioLopez-so6ph 4 месяца назад
Do I have to do the alignment after I change all struts
@daveallen2455
@daveallen2455 9 месяцев назад
Impact gun pulled the sway bar nut off without any problem. Nice video.
@Sanjin-lr7ol
@Sanjin-lr7ol Год назад
Y'all always have the best videos. Watch them for countless vehicles I've worked on
@johnharris7115
@johnharris7115 8 месяцев назад
Fantastic video, direct & to the point, and very informative. Going to tackle this in the next few weeks, Thank you for posting , job well done !
@TyWhalin
@TyWhalin Год назад
The most recent estimate I got on the Internet for doing the rear struts on a 2003 Toyota Avalon XLS was $613.15. Good video too.
@Nolano386
@Nolano386 3 месяца назад
Another video had you take out the whole back seat and the speaker covers and stuff. thanks for your video showing the easier way.
@TRQ
@TRQ 3 месяца назад
+@Nolano386 Thanks for watching our video! 1aau.to/m/Shop-TRQ
@silverdragontaylir8252
@silverdragontaylir8252 6 дней назад
Perfect video(good craftsmanship
@rickfitzgerald4426
@rickfitzgerald4426 Год назад
Do both side struts before reinstalling the seat parts. Great informative video;
@Finnigan9
@Finnigan9 3 месяца назад
Excellent...great camera work, great lighting, great instructions and I could understand every word you said. A+++
@brother_jaha
@brother_jaha Год назад
Awesome video all the way to showing how to put the wheel back on! Nice nice nice you rarely see this type of video
@gregturman9935
@gregturman9935 Год назад
Great video on rear struts. Perfect !
@aryoerger
@aryoerger 6 месяцев назад
Very well done! I appreciate your help!
@ronaldholland2913
@ronaldholland2913 2 месяца назад
Great video! And, thank you for the torque values.
@NoName-tm2yq
@NoName-tm2yq 5 месяцев назад
Outstanding video! I can do this job now!
@louisj2285
@louisj2285 5 месяцев назад
great video. i watched then went out and did my car today. A few things: Allen wrench instead of pliers on sway bar bolt, definitely use a center punch or the like to get big knuckle bolts out once nut is off, when replacing use an 3" extension in the hole to line up strut if you cant knuckle bolt back in, the furthest back bolt on top of the strut has very limited space: make sure you have a tool that'll fit
@adamrocks529
@adamrocks529 Год назад
Really good video. Thanks!
@orlandorivera9011
@orlandorivera9011 5 месяцев назад
Very nice tutorial, its help me a lot, thanks.
@kennetheady1347
@kennetheady1347 Год назад
Thanks that's going to be easy to do.
@aaronjohnstontube
@aaronjohnstontube Месяц назад
Thx for the vid! Do you recommend replacing anything else when doing this?
@jaed2630
@jaed2630 Год назад
Why not just stick a screwdriver through the bottom strut hole and then un bolt the top. Would it still fall?
@anthonymoore8480
@anthonymoore8480 5 месяцев назад
Excellent, tutorial!!!
@nevraXmike
@nevraXmike 20 дней назад
These parts are listed in the description as 2002 Toyota, but in the hyperlink above, its goes to 2004. Will these still fit properly?
@ronniedaniels4587
@ronniedaniels4587 7 месяцев назад
Good tutorial!
@angieoh7108
@angieoh7108 3 месяца назад
Now do the passenger side strut and show how difficult it is to change!
@arymonem
@arymonem 2 года назад
Excellent!
@bernandoturner4840
@bernandoturner4840 Год назад
Lord Bless the Folk that have the Know how to Work on Cars….
@JamesTaylor-ce4mr
@JamesTaylor-ce4mr Год назад
Thanks!
@JamesTaylor-ce4mr
@JamesTaylor-ce4mr Год назад
Thank you
@righteous1229
@righteous1229 Год назад
Thanks helpful video
@TRQ
@TRQ Год назад
+RIGHTEOUS 1 Thanks for watching our video! 1aau.to/m/Shop-TRQ
@MaverickAus
@MaverickAus 2 года назад
Thank you, my 2005 Camry has disk brakes on the rear, does that make any difference to what is shown in the video?
@mayoroflickrun8388
@mayoroflickrun8388 2 года назад
no, same basic install
@paulvincentperena1838
@paulvincentperena1838 5 месяцев назад
is that the stock height of toyota camry?
@Sexyduffman420
@Sexyduffman420 Год назад
I have the same exact 2 locking piers you tried in the beginning 🤣
@trewten5579
@trewten5579 2 года назад
would you need an alignment after replacing the struts?
@judahlion2067
@judahlion2067 Год назад
Yes
@markgreiser464
@markgreiser464 Год назад
So, apparently there was a Lock, to the Backseat in the Trunk. Someone gave me this Car , so I know very little about it. I am now destroying my LR Seat. Other than that, thank you for the Video.
@JiltedValkyrie
@JiltedValkyrie Год назад
Hmm, this wasn't so bad... I think I can do this and save $1000 of quoted labour. I may take it in for an alignment, though.
@mengx94
@mengx94 Год назад
Just don't use Chrome sockets with an impact 😉
@jenniferscott5339
@jenniferscott5339 8 месяцев назад
How long does it take
@TRQ
@TRQ 8 месяцев назад
+Jennifer Scott We do not have an estimated timeframe on the repair.
@josephriddle2772
@josephriddle2772 Год назад
Yeah, but keep in mind that this repair job on this car is not completely rusted out, nore or the old struts
@JoseGarcia-ov1gc
@JoseGarcia-ov1gc 2 года назад
At 8:13 it should be 133 ft-lbs not 188 ft-lbs
@jaed2630
@jaed2630 Год назад
Tighter the better. Besides. How many tunes will you change the struts? U less they're total trash
@kylerogers3607
@kylerogers3607 11 месяцев назад
No offense man, but it looks like a couple of the lug nuts were beyond the torque wrench setting just from the impact. I get that you're saving time by running them down - but at least do a good job for the camera.
@xerorenegado15
@xerorenegado15 5 месяцев назад
Yeeah.. this is pretty difficult I'm just going to go to a mechanic
Далее
2002-2006 Toyota Camry Front Strut Replacement
9:19
Просмотров 2,4 тыс.
УНИТАЗ В ЛЕСУ?? #shorts
00:24
Просмотров 734 тыс.
когда мучает жажда // EVA mash
00:58
Просмотров 1,2 млн
ШОКОЛАДКА МИСТЕРА БИСТА
00:44
Просмотров 926 тыс.
How to Replace Rear Struts 06-11 Toyota Camry
18:39
Просмотров 180 тыс.
Most Common Strut Installation Mistakes!
14:02
Просмотров 1,1 млн
How to Replace Rear Strut Assembly 97-01 Toyota Camry
9:40
2001 Toyota Camry Rear Strut Replacement
12:23
Просмотров 206 тыс.
How To Replace Front Struts 2002-2006 Toyota Camry
9:20
04 Toyota Camry Rear Strut removal and Install
17:45
How to replace Knock Sensor 2002-06 Toyota Camry
15:20
three feet under the keel   #offroad
1:00
Просмотров 2,8 млн
Ява 638 сегодня в Тренде ?
0:14
Просмотров 297 тыс.