Step-by-step guide on how to replace a bearing. If you have any questions, leave them in the comments below and I'll get back to you.
Tools Necessary:
-Pry bar.
-Rubber mallet.
-3lbs Sledge hammer.
-4lbs Sledge hammer.
-Ball peen hammer.
-Camber guage.
-1/2in. Impact wrench.
-30mm Socket (12 point).
-22mm Socket.
-19mm Socket.
-17mm Socket.
-Flat tip screw.
-22mm Wrench.
-14mm Wrench.
-17 mm Wrench.
-1/4in Ratchet.
-1/4in Extention.
-10mm Socket.
-Side cutters.
-Small & large water pump pliers.
-Snap ring pliers.
-Chisel.
-Punch.
-Anti-seize.
-Big sledge hammer.
-20 Ton hydraulic press (with adapters & bearing separator).
Too all those that have subscribe, a big mahalo for your support and for those of you who haven't yet don't forget to subscribe, give me the thumbs up, and share with your friends & family! Thanks for watching, aloha!
21 окт 2020