How to replace the Water pump on a 2014 Chevy cruze 

Thank you for watching I really appreciate it

Thanks for watchin really apreciate it, besure to like and subscribe for more tips and tricks.

I'm about to do the same thing for my gf... how was it replacing both?

Your very humble for doing that mechanics in my town charge 1000-1500

Thanks always nice to help out ,it's what everyone else should do when possible,it makes life better for everyone.

You are an awesome human being!

thanks for watchin ,I really apreciate it the kind words

thanks for watchin I'm glad I was able to help you out.

Yeah. $600 at my “local shop” (Aaron’s Automotive) in College Station Texas, but not gonna mention names….nah. The $150 plus “diagnostic fee” taken from my son was enough. I’ll do it.

Done. No issues or problems. I put on a new tension idler and belt also.

Same my local shop wants 600 to 800

1100 to 1500 to replace pump and belt in Florida smh

thanks for watchin

Thanks for watchin really apreciate it

Thanks for watchin I'm glad I was able to help you, besure yo subscribe for more helpful tips and tricks, thanks again

thanks for watchin

thanks for watchin really apreciate it besure to like and subscribe for more tips and tricks

thanks for watchin really apreciate it

thanks for watchin

thanks for watchin

thanks for watchin

Thanks for watchin really apreciate it besure to like and subscribe

Thank you I did quick question do you know where someone can buy the bolts to the water pump?

If you have a old bolt for comparison you can get the thread pitch and the diameter of the bolt and probally get one from any good hardware store or well equipped parts store

thanks for watchin really appreciate it

$1700?!

Your welcome thanks for watchin

thanks for watching

thanks for watchin

Thanks so much Cris! The dealer diagnosed it and never mentioned that this has a special coverage service bulletin for this issue!

@@CJ-io7cl did they repair it?

Thank you and your post, it is definitaly true in Loveland colorado. To have someone do it would be around 700 , at the least it would cost me about 80 and a day. Thank you so much, King GMC took care of it , wish i knew you because i would send you something, thank you sooooo.... much

thanks for watchin

He said he had a jack supporting it

the rtv is stands for room tempture vulcanzation, , which means it hardens at room temp. I usually put it together with the gasket and longs as it's not 30 or 40 degrees, let it sit for a hour before I ad coolant .thanks for watching

Need it too

I put em back on, just were I decided to end the video

yes they are thanks for watchin

I'm not sure you could have a cracked housing or bad gasket thanks for watchin

Your welcome thanks for watchin and be sure to like and subscribe for more tips and tricks.

yeah when you take any mount off you should always support the engine some how,thanks for watching.

I'll work one up and put it in the description thanks for watchin besure yo like and subscribe for more helpful tips and tricks

it tool a couple hours but I have all the tools I needed right there thanks for watchin.

Thanks for watchin ,I think it was a gates and I got it from adavenced autoparts ithink. Besure to like and subscribe for more tips and tricks

I dont think this has a bleed screw you may need to look at a manual,thanks for watchin.

Just fill the radiator up then run the car up to temp and fill the resavoir up to full hot mark and recheck after running for awhile!! Hope this helps you..

Taking the thermostat off is required in order to put it on the new water pump. I hope this helps. Thanks for watchin and besure to like and subscribe

good yes thank you. I just had my waterpump replaced couple weeks ago and my car is worse than before. The reason I replaced the waterpump is because I had some vanishing antifreeze I had to top off but no visible leaks and no overheating. the thermostat housing and hoses were replaced about a year and a half ago and it never overheated afterwards . But since I've had the waterpump replaced my car has overheated 3 times. However after I had the waterpump replaced it over heated within the first week. Three times in 3 weeks and the last time there was zero fluid in the reservoir. When I added coolant into the reservoir it poured right out onto the ground. The shop that replaced the waterpump said its leaking from the water outlet aka thermostat housing. The thermostat housing is only a year and a half old so I'm wondering if they are either lying to me about the waterpump not being any good, attached right or if they damaged the thermostat housing when they replaced the waterpump. (The thermostat housing and hoses were replaced at a different shop).

@@tallterrilaw8646 its possable that your thermostat is sticking causing it to over heat. If you had a leaking head gasket it could cause the water fo disappear also .It's also possable the thermostats could of been damaged when it was put back in. I hope this helps

@@fixergood well it's no longer gradually disappearing its pouring out majorly. Thank you

​@@tallterrilaw8646did you check the bottom of the reservoir or line there for cracks or a tear? Where exactly is the coolant ending up?

I am also asking

Yes it is thanks for watchin

Thank you for doing the video

@@TRUSTY901 you welcome thanks for watchin

thanks for watchin I think this one was leaking