Тёмный

How to replace timing chain on a 2.0L Hyundai Elantra 

Junkyard Junkie
Подписаться 8 тыс.
Просмотров 35 тыс.
50% 1

🔧 Welcome to Junkyard Junkie, where we turn DIY car repairs into an adventure! In this step-by-step tutorial, we're diving into the nitty-gritty of replacing the timing chain on a 2.0L Hyundai Elantra. If you've been hearing unusual engine noises or experiencing performance issues, it might be time to swap out that timing chain and ensure your engine's optimal performance.
⚙️ In this comprehensive guide, Junkyard walks you through the entire process, from diagnostics to the final torque spec. We'll cover essential tools, safety precautions, and insider tips to make this repair accessible for both seasoned gearheads and DIY enthusiasts alike.
⏰ Why should you replace your timing chain? Over time, wear and tear can lead to a stretched or damaged timing chain, potentially causing serious engine damage. Keeping up with maintenance is key to extending the life of your Vehicle, and i'm here to guide you every step of the way.
🛠️ Tools and Parts Mentioned:
Timing Chain Kit
Wrench Set
Torque Wrench
Gasket Sealant
And more!
👨‍🔧 Our hands-on approach and detailed explanations make this guide perfect for those looking to save some bucks on labor costs or simply wanting to learn more about their vehicle. So grab your tools, put on your DIY hat, and let's get those hands dirty together!
🚗 Subscribe to Junkyard Junkie for more no-nonsense car repair guides, salvage yard adventures, and automotive DIY projects. Hit that notification bell, so you never miss an episode that'll have you feeling like a pro mechanic in no time.
📌 Have questions or want to share your own experiences with timing chain replacements? Drop them in the comments below, and our community of gearheads will be more than happy to help.
Thanks for tuning in, and remember - one man's junk is another man's treasure! Stay revved up with Junkyard Junkie! 🚗💨
In this video i show you how to change the timing chain on your Hyundai elantra. this is the 2.0L 4 cylinder with vin 5NP. They have a poor design on their motor anyway, but i show you in this the chain tensioner doesn't have a ratchet mechanism. but overall it is a pretty easy job and hopefully can help all of you out. If you enjoyed the video please leave a like, comment, share and subscribe. Thanks!
Tools and parts:
Tools used in most videos:
socket set: amzn.to/2ycTz7U
plier set: amzn.to/2Zs7na3
ratchet wrenches: amzn.to/3bXLYrz
electric ratchet: amzn.to/2ZDjOzQ
flash light: amzn.to/3egL5vS
pliers set: amzn.to/2AZqrC5
screwdriver set: amzn.to/2TESsFv
gloves: amzn.to/2TESsFv
pick set: amzn.to/2ZAfwsL
Disclaimer:
Due to factors beyond the control of JunkyardJunkie, I cannot guarantee against improper use or unauthorized modifications of this information. JunkyardJunkie assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. JunkyardJunkie recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of JunkyardJunkie, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not JunkyardJunkie.
0:01 - intro

Опубликовано:

 

29 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 104   
@renegarza3492
@renegarza3492 4 месяца назад
I work a lot on kia/hyundai, and this happens on 2.0 and 1.8. Sometimes, they will fire right up and other times, they will jump time again.Just did one today, and it did it.I have to put it back in time.
@JunkyardJunkie
@JunkyardJunkie 4 месяца назад
That’s wild to me that it’s that bad. Any upgraded tensioner or anything people can do to help this from happening again? I’ll pin yours to the top for now. Thanks for watching!
@benz240d
@benz240d 4 месяца назад
Been there, I did about 20 so far and you know what? I zip tie the two guides now just enough that it will NEVER literally never jump again. Foking insane.
@dieggogoncalves874
@dieggogoncalves874 2 месяца назад
@@benz240dzip tie doesn't melt?
@benz240d
@benz240d 2 месяца назад
@@dieggogoncalves874 I dont think so. if you are comfortable with a wire or something you can fabricate, sky is the limit. But as far as I'm concerned that's the fix. Lol
@dovhanimuleya6079
@dovhanimuleya6079 Месяц назад
What cause timming for i30 to jump aways
@KiarahJugares
@KiarahJugares 6 месяцев назад
Oh my God, this guide is EXACTLY what I needed and extremely informative. Thank you for taking the time to share this, it is very appreciated and helpful. Thank you.
@JunkyardJunkie
@JunkyardJunkie 6 месяцев назад
I’m glad I could help! Best of luck. Thanks for watching!
@diegow00baby19
@diegow00baby19 2 месяца назад
@@JunkyardJunkieme 2 thanks bro
@jharrison6557
@jharrison6557 6 месяцев назад
Just did one today, couldnt understand the reason for the 3 degrees....im assuming once you put tension back on the chain it will move the timing marks so theyll line up....i didn't do that though, i just used a couple of vice grips to lock the cams down and made sure the crank was positioned properly and installed the chain that way. Spun the engine over several times and the marks line up so im gonna cross my fingers that its timed right
@JunkyardJunkie
@JunkyardJunkie 6 месяцев назад
If they line up you should be good to go! Let me know how it turns out. Thanks for watching!
@jharrison6557
@jharrison6557 6 месяцев назад
@@JunkyardJunkie just cranked it up, so far so good
@jharrison6557
@jharrison6557 6 месяцев назад
@JunkyardJunkie I replaced the exhaust cam and cvvt unit for a p0017...after the repair I was letting it idle, checked for codes after 10 minutes and p0017 was pending. My stomach just sank....then I realized I hadn't reset the adaptive values and once I did that it's been smooth sailing
@JunkyardJunkie
@JunkyardJunkie 6 месяцев назад
Haha oh ya that would defiantly be a heart sinking moment. Glad you got it though!
@Ificommenttrashthenitstrash
@Ificommenttrashthenitstrash 4 месяца назад
had did you reset the values? just delete codes? ​@@jharrison6557
@Ificommenttrashthenitstrash
@Ificommenttrashthenitstrash 7 месяцев назад
2 things. When you first put crank at TDC, the repair manual states to turn 3° more before taking guides off. Not sure if you did it off camera. secondly, the reason the chain marks dont line up on sprockets after 2 revolutions is because, it takes nearly 100-200revolutions for them to line up again. that amount may be inaccurate, but i know it takes alot of turns. oh and one last thing for anyone willing to do this work. If you are doing this job, replace all of your timing components. The oil pump is actually part of your timing since the system runs off of oil pressure. If you have the code p0017, and you replace everything but the oil pump, you may still have a p0017 code. After alot of research and understanding with my own elantra after i did the work, i still had the code. This was back in September. i am now just ordering a new crankcase with oil pump after all these months because this job really exhausted me out.
@JunkyardJunkie
@JunkyardJunkie 7 месяцев назад
Great comment. I’ll pin it to the top for others to see. As for the up to 3degrees yes I did. I should have recorded it but no matter what you have to line it up with the mark on the chain. I understand it will eventually come back around mainly I’m asking why are they not using a ratchet style tensioner? Because if you hold tension on the chain while someone turns it it will line up perfect every time. So it jumping around before oil pressure builds seems like a terrible design that would be more prone to fail. Whereas, if they just added a ratcheting mechanism it wouldn’t be allowed to go back in. That is great advice you’re already in there might as well to save headache further down the road. Thanks for your input. Thanks for watching!
@31dz78
@31dz78 Месяц назад
Did it fix your problem? I just had my 2017 Elantra 2.0L fixed by a mechanic. I ordered the VVT Solenoid, the camshaft sprockets, whole timing chain kit including chain, tensioners and guides and I changed the oil pump too. Just to wake up this morning and seeing the p0017 code came back on my car. But its running fine I don’t feel like its not in time anymore but I might be wrong. Bro my comments keep getting deleted it cost me 1833$ CAD for the parts and 580$ Cad for the labor
@kilaparthikarthik3899
@kilaparthikarthik3899 Месяц назад
​@@31dz78hey there, today morning I got the tk tk tk noise from the engine and I showed it to the mechanic and he told it's a timing chain problem...I want to know how much it's gonna cost me to get it repair....please let me know....
@31dz78
@31dz78 Месяц назад
@@kilaparthikarthik3899it cost me 1833$ Canadian dollars in parts and 580$ in labor
@kilaparthikarthik3899
@kilaparthikarthik3899 Месяц назад
​@31dz78 please tell me how much it gonna cost....
@Lees_Automotive_36972
@Lees_Automotive_36972 7 месяцев назад
Hey you once used an air stapler, on changing a mustang convertible top will a hand stapler work?
@JunkyardJunkie
@JunkyardJunkie 7 месяцев назад
Haha yes you could have commented on that video. But ya a regular hand stapler will work. Make sure to get the right size stainless steel staples, that I mention in the description of that video. I believe I said in the video you can use a hand stapler it’s just easier and faster with the air powered. Hope this helps. Thanks for watching!
@TheYotamaster
@TheYotamaster 2 месяца назад
Great video. I have a 2017 Accent that I need to change the valve stem seals. Question where can you get a service manual for Hyundai’s? I can’t find one anywhere.
@JunkyardJunkie
@JunkyardJunkie 2 месяца назад
Thanks! I use alldata. They have it where you can buy the professional version where you can look up any cars but pretty costly. Or you can pay just to have your vehicle’s info. Highly recommend it I believe it’s like 50 a month for the diy version. Hope this helps. Thanks for watching!
@mustafafadel2035
@mustafafadel2035 Месяц назад
Hello I’m attempting this job in my garage, can you elaborate more on the three degrees? So I first line up the crank at tdc and spin it three degrees past TDC before taking off the crank pulley?
@JunkyardJunkie
@JunkyardJunkie 26 дней назад
Yes so you should be able to see in the images I provided. But if I remember correctly it is when you’re going to line everything up you will have to turn the crank shaft 1-3 degrees in order to get it to line up correctly. I hope this helps. Thanks for watching!
@mustafafadel2035
@mustafafadel2035 25 дней назад
@@JunkyardJunkie thank you for your response and explanation I understand now your video was very helpfull god bless
@gygy-wp3pb
@gygy-wp3pb 7 месяцев назад
I have a 2019 Elantra I’m replacing the chain bc out of timing. On the list of parts I see Timing Cover Gasket. Idk what that is and I can’t find it. Is it necessary ? I didn’t hear him mention it. Thank u so much
@JunkyardJunkie
@JunkyardJunkie 7 месяцев назад
Timing cover gasket is like this: a.co/d/1tQ2dwz You have to apply it all the way around the cover, but I show all of that in the video. Hope this helps. Thanks for watching!
@fashionstreet1
@fashionstreet1 Месяц назад
Very detailed video tutorial question how do tell if timing chain jump time?
@JunkyardJunkie
@JunkyardJunkie Месяц назад
Thanks! I worked hard on trying to make it a good video for everyone. How I checked to see if it was serious engine issues, is a leak down test. As shown here on my video: How to do a cylinder leak down test (EASY) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-41xnWPVSe14.html However if you just want to see if it jumped time, you could pull the valve cover and see if the two points line up. Hope this helps. Thanks for watching!
@RomanSherin-lm9cs
@RomanSherin-lm9cs 2 месяца назад
intake pasher was not lined with exhaust during chain installation or i mistaken?
@JunkyardJunkie
@JunkyardJunkie 2 месяца назад
It was I go on close to show that it was. Plus it was in line after the revolutions as well. Hope this helps. Thanks for watching!
@dustinwerner870
@dustinwerner870 4 месяца назад
So you don't have to put the sealant threadbond on the entire mating surface just where the 4 mating spots on the block and head? I'm know that what you showed but I'm just making damn sure before I put it all together. Thank you sir great vid.
@JunkyardJunkie
@JunkyardJunkie 4 месяца назад
So yes you want to go all the way around the cover and in the spots shown between cam carrier and head, and head and block. Trust me I know how much work it is to do but you’ll get it done! If I can do it you can do it. Best of luck. Thanks for watching!
@dustinwerner870
@dustinwerner870 4 месяца назад
@@JunkyardJunkie yes sir thank you so much I'm having to rebuild the entire engine in my 2016 Elantra get it threw a rod bearing right after I finished paying it off. But thanks for the reply junkyard much appreciated I got a rebuild kit from DNJ I got a couple gaskets that idk where they go or what they are if I added the pics of them you think you might be able to help me out there?
@mbpfilms8030
@mbpfilms8030 6 месяцев назад
If it doesn’t jump time can’t I just make sure that the timing is set at tdc and then just use a couple wrenches stuck together to hold the cams where they should stay?
@JunkyardJunkie
@JunkyardJunkie 6 месяцев назад
Ya if it hasn’t jumped time then ya that would work. Best of luck. Thanks for watching!
@Knarfgarage
@Knarfgarage 4 месяца назад
Hi I replaced the tensioner and chain with the guides and still have the 1 second rattle at start up any ideas on what it can be?
@JunkyardJunkie
@JunkyardJunkie 4 месяца назад
Ya that’s normal unfortunately. Like I showed in the video the tensioner is oil driven. So, it takes a second to build that pressure. Hope this helps. Thanks for watching!
@drewalessi9352
@drewalessi9352 6 месяцев назад
Man I’m so stuck I did all of this but I don’t know how to get the 3° I guess I just ran it and it ran bad took it off and it’s out of time
@JunkyardJunkie
@JunkyardJunkie 6 месяцев назад
Ok so remember that after you time it it won’t ever look like it’s in time again even when I did the two revolutions the marks no longer line up. But pretty common on these that the valve may be burnt. Check out my other video where I show you how to do a leak down test this will be a sure fire way to tell what’s going on. Hope this helps. Thanks for watching!
@giorgigkebadze184
@giorgigkebadze184 7 месяцев назад
Hello, I have a question. I have a Hyundai Elantra 1 and 8 engine 2015 Limited. When I start it in the cold, the sound comes from the engine. It is good if the oil does not burn. There may be a problem
@JunkyardJunkie
@JunkyardJunkie 7 месяцев назад
Those engines are known for that on cold starts as it waits for the engine oil to get back to the top. I know there was something out stating to use oem filters too or it could cause damage. Honestly Hyundai tend to have engine problems. If not that then the little plastic gear in your steering is prone to failing too. Hope this helps. Thanks for watching!
@Ificommenttrashthenitstrash
@Ificommenttrashthenitstrash 7 месяцев назад
@@JunkyardJunkieonly reason why hyundais have problems is because the US built models were poorly built. The korea built ones dont have the big issues the US have. Youll know if its korea built if the first letter of the VIN starts with K. if it starts with the number 5 or any other number, its a US build. Hyundais are really good reliable cars, i blame our country for purposly building an engine with poor quality or assembled parts so that the money goes around. Its the same corrupted business idea that Apple did when they were slowing iphones down per update. smh.
@Ificommenttrashthenitstrash
@Ificommenttrashthenitstrash 7 месяцев назад
GREAT video compared to others iv seen. this one is the best quality and helpful 💯
@JunkyardJunkie
@JunkyardJunkie 7 месяцев назад
Thank you that truly means a lot to me. Thanks for watching!
@rongraham1730
@rongraham1730 3 месяца назад
Ive got one to do next week so thanks for this. Great video and much appreciated!
@JunkyardJunkie
@JunkyardJunkie 3 месяца назад
Thanks! Good luck. Thanks for watching!
@Ernestosv982
@Ernestosv982 5 месяцев назад
I understand that Hyundai manufactured a new tensioner so that the chain does not skip. Does anyone know if it's true?
@JunkyardJunkie
@JunkyardJunkie 5 месяцев назад
Not that I’ve seen. Thanks for watching!
@Ernestosv982
@Ernestosv982 5 месяцев назад
@@JunkyardJunkie ok
@mattt9298
@mattt9298 5 месяцев назад
Getting ready to help my son with this job. He ran it low on oil and we're thinking the timing chain jumped because of that actuator needing oil pressure. I'm keeping my fingers crossed that he didn't damage the valves.
@JunkyardJunkie
@JunkyardJunkie 5 месяцев назад
I’m glad you’re helping him. That’s always good quality time. But I hope so too. Unfortunately these engines are extremely weak add that with low oil may want to do a leak down test to see what all is effected. I have a video on that as well if you need help. Best of luck. Let me know how it goes. Thanks for watching!
@tonygilliam2216
@tonygilliam2216 3 месяца назад
When you mentioned that the actuator needing oil pressure, are you talking about the two cam phasers sprockets that the chain go around on top.
@mattt9298
@mattt9298 3 месяца назад
It's my understanding that the oil pump supplies oil to the actuator to help keep proper tension on the chain.
@martincastro3612
@martincastro3612 2 месяца назад
I replaced the the timing chain it's in time cars not starting
@JunkyardJunkie
@JunkyardJunkie 2 месяца назад
Did you follow my other video? How to do a cylinder leak down test (EASY) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-41xnWPVSe14.html This will make sure your motor is healthy. If you have loss greater than 15 you could have brunt valves or other issues that has to be fixed. Hope this helps. Thanks for watching!
@MK-jz5ym
@MK-jz5ym 7 месяцев назад
Do you know what code was the reason to change the timing chain? P0014? I have a 2.0 that may have the same issue.
@JunkyardJunkie
@JunkyardJunkie 7 месяцев назад
It had p0014 along with misfire on 2 of the cylinders. I suggest checking compression. Hopefully this isn’t your problem but these engines are pretty terrible. If you do have to do it or want to remove your engine it’s not too bad, heres a link to a video I made fully covering it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mgPXhwb--aU.htmlsi=wjuzHfC0HyDTuWUn Hope this helps. Best of luck. Thanks for watching!
@MK-jz5ym
@MK-jz5ym 7 месяцев назад
Thanks for your reply. No misfire, just P0014. Runs great for 10, 30, 50+ miles at different speeds, but P0014 keeps coming back. Engine oil is clean, OCV's replaced etc...any other idea? I'll pay you to come fix it! 🙂 @@JunkyardJunkie
@artina.i5069
@artina.i5069 6 месяцев назад
Hi sir, please show me how to replace the gearbox filter if possible
@JunkyardJunkie
@JunkyardJunkie 6 месяцев назад
The client didn’t want that yet if he ever does I will. Best of luck. Thanks for watching!
@christopherhernandez2434
@christopherhernandez2434 6 месяцев назад
Do u know what will cause the timing chain to jump. ?
@JunkyardJunkie
@JunkyardJunkie 6 месяцев назад
Usually a tensioner going bad but it could be other things like your timing chain guides breaking or chain slack and etc. Hope this helps. Thanks for watching!
@annacahill5394
@annacahill5394 6 месяцев назад
Nice to learn and see whats done for this repair. This one might be a little out of my league. Dang it. lol.
@JunkyardJunkie
@JunkyardJunkie 6 месяцев назад
I’m glad I could help. Don’t be so quick to count yourself out remember if I can do it you can do it. Thanks for watching!
@annacahill5394
@annacahill5394 6 месяцев назад
​@JunkyardJunkie it seems like it might be difficult to do in the car?
@andrew9493
@andrew9493 4 месяца назад
Do you need to take the water pump off to get the cover off
@JunkyardJunkie
@JunkyardJunkie 4 месяца назад
No I did but it’s not needed. Hope this helps. Thanks for watching!
@kangaroopawquilts
@kangaroopawquilts 2 месяца назад
The reason your tensioner is moving in and out, and the reason your chain is hopping on the cam gears is because it looks like you may have forgotten to reduce chain slack or backlash on the right side of the crank sprocket upon installation of the chain. This is also the reason for the recommended 3 degree adjustment. Remember the tensioner can only reduce chain slack on the left side of the crank sprocket for obvious reasons.
@JunkyardJunkie
@JunkyardJunkie 2 месяца назад
I did the 3 degree adjustment. But can you explain why you think this would be the issue? As I showed in the video the tensioner doesn’t have a ratcheting mechanism. So it is purely tensioned via oil pressure.
@terrellscaife2411
@terrellscaife2411 2 месяца назад
Great content
@JunkyardJunkie
@JunkyardJunkie 2 месяца назад
Thanks a lot of time went into it. Glad I was able to help. Thanks for watching!
@janonymous-uj2vx
@janonymous-uj2vx 4 месяца назад
Just changed my chain but still have the same problems.. its still making that sound when revving like the one in your video, its the exact same sound. Do you think i shouls replace the phasers?
@JunkyardJunkie
@JunkyardJunkie 4 месяца назад
Did the teeth on them look wore down or anything?
@tonygilliam2216
@tonygilliam2216 3 месяца назад
There is a dial pen on the inside of the exhaust phaser that can shear off and if it's gone it will still have a problem until you replace it. Needs checked once you remove the chain. The exhaust is bank 1 phaser against the firewall. The big sprocket looking round deal the chain wraps around the two of them. The other is the intake bank 2
@johnfranklin5277
@johnfranklin5277 2 месяца назад
How many miles on this car?
@JunkyardJunkie
@JunkyardJunkie 2 месяца назад
89k. Hope this helps. Thanks for watching!
@johnfranklin5277
@johnfranklin5277 2 месяца назад
Thanks. Was curious. I have a 2017 Elantra I bought new in August of 2016. It's been a fantastic car. I have 105.000 thousand miles on it now. It has had 0 repairs, and 0 issues. Only things not original on the car is tires ,2 batteries , and wiper blades. It runs and sounds like new, uses no oil. I do take very good care of my cars. It has had 3000 mile oil changes, using Castrol GTX, 5 30, since new. 5 20 recommended, but owners manuel says 5 30, 10,30 may be used, so I chose that. Most reliable car I've ever owned. I've only bought new cars since 1980, so I've had a bunch, some expensive, some cheap like this car. None have gone 100.000 miles without needing some repairs. Even the brake pads are original, I had them inspected 4 months ago when I bought new tires, again I was told, nope there stil good, still don't need new pads yet! Amazing. And no, I'm not running stop lights, and going thru stop signs! 😊
@JunkyardJunkie
@JunkyardJunkie 2 месяца назад
That’s great. I do love the look and feel of these cars. The fact you had it since new and kept proper maintenance I guarantee has helped it do as well as it’s doing. But, they are known to have weak motors. Keep up the good maintenance and I hope you get a ton more miles out of it!
@familiadinizemwashingtondc3072
@familiadinizemwashingtondc3072 5 месяцев назад
Thanks my friend
@JunkyardJunkie
@JunkyardJunkie 5 месяцев назад
I’m glad I could help! Thanks for watching!
@samuelqwesi6895
@samuelqwesi6895 4 месяца назад
So means the chain makes doesn't matter anymore
@JunkyardJunkie
@JunkyardJunkie 4 месяца назад
Huh?
@yagamiyassine1435
@yagamiyassine1435 7 месяцев назад
good job
@JunkyardJunkie
@JunkyardJunkie 7 месяцев назад
Thank you! I’m glad I could help. Thanks for watching!
@mikkelparmley30
@mikkelparmley30 7 месяцев назад
Good video but you neglected to show the crank at TDC before installing. I've been retiming this same engine for the past year because of following the step that state to turn the crank two to rhree notches and then realigning the camshafts. Come to find out I shouldn't have touch the cams only move the crank 2-3 notches then install the chain. You were kinda doing the same thing I always do but you didn't move the crank the 2-3 notches. I just finished it again on today 3-3-24. Also you didn't need to remove the water pump only the pulley.👍👍
@JunkyardJunkie
@JunkyardJunkie 7 месяцев назад
Thanks but for the 2-3 notches I included the resources on screen and showed the end result that it’ll line up With the colored link. Glad you got yours straightened out. Thanks for watching!
@emmicocoa
@emmicocoa 4 месяца назад
Hello I had a noise on my elantra and my dad figured out it was the chain tensioner, he replace it and the noise is gone, but now when we turn on the car the RPM is between 1500 and 2000 on parking, and it give us the code P0016 AND P0017 can you help us? He didn't change the chain, just the tensioner, does he need to move the timing or what does he need to do? Thanks in advance
@emmicocoa
@emmicocoa 4 месяца назад
​@@JunkyardJunkiehelp me please
@forgetfulme1719
@forgetfulme1719 4 месяца назад
@@emmicocoa crank timing advanced, not at tdc
@benz240d
@benz240d 4 месяца назад
​@@emmicocoayour chain is out of time. This chain job is very critical and the steps are crucial.
Далее
TIMING MARKS CHAIN KIA FORTE SOUL 1.8 2.0
6:13
Просмотров 219 тыс.
КАК БОМЖУ ЗАРАБОТАТЬ НА ТАЧКУ
1:36:32
Witch changes monster hair color 👻🤣 #shorts
00:51
HOW TO REPLACE TIMING CHAIN ON HYUNDAI ELANTRA
30:03
Просмотров 252 тыс.
Сборка мотора #G4NA
31:50
Просмотров 37 тыс.
HOW TO SET TIMING MARKS ON HYUNDAI  ELANTRA TUCSON
7:47
Hyundai/ Kia .Code P0017 Solves In This Video .
9:57