How to replace tire for Ninebot MAX, tire replacement 

You make it look so easy 😐 i been struggling for 2 days now

A tip for anyone buying a scooter don’t buy one with numatic tyres you will regret it solid tyres only

Changing electric scooter tire is the same as changing a tracker trail tire, it is not easy 😐

Wonder if my local bike shop can do it. That looks like a PITA :)

very nice thanks to uload this one

I change the tire already but the air is not getting in

Tried replacing mine today. The self sealant was everywhere. What’s the best way to clean it? 5 hours later and the tire is in the wheel but I can’t seat it do to the sealant from the old tire.

손으로 쪼물딱거려서 들어간다면 많이 늘어난 타이어라는거밖엔....그리고 샤오미 무선펌프로 비드면 안착은 쉽지않습니다.

I dont have a vice grip or clamps... should I go buy clamps now?

What size tires am i looking for. I know it's 10 inch but on the tire it says 60/70-6.5 is that the tire size I should be looking for?

What about replacing the tire valve-the part where it pumps air into the tire-can it be replaced without taking the tire out? Where can we get those tools that you used?

What is the name of those black plastic tools you used to take the tyres off with?

Good effort to change that tire but bad system of the company because there is not an easy plug where to disconnect cables from that tire.the way this guy got it you have to disconnect many things that at the end is not worth it for the costumer and mechanic. The engineers of these days are missing few things everywhere!

Fan, is this a vid for professionals only? I got excited with the knife and fork. Freaking rubber alternator this is madness

I tried changing my back tire today and could not get it on whatsoever… any tips/tricks/suggestions?

The two black plastics to change the tires. Which manufacturer is it and where can I buy it? Do you have a link?? Thank you!!!

4.5 bars is a lot, isn't it? I remember the recommendation was 3.5 bars. 🤔

Followed these steps but my tire will not bead not allowing it to pump up

Great video but wish he explained what he was doing

Hi, I just want to know if how much air did you put in the tire? Is this automatically calculated by the xiaomi air pump? This is the exact video that I'm looking for to maintain my Ninebot Max. Thank you!

The hardest part, how did you get the cable disconnected?!

How you manage to pump till 9bar whit xiaomi pump

I replaced the tyre of my Ninebot today, but I could not pump up it. The air is escaping because the inside of the tyres is not perfectly fitted and I have a manual pump.

Is it okay to slime the wheels?

My motor lost the black rubber around it is it important.

How did you make the 5 gallons of tar inside the tire not make your job Messy where is the tar?

Still selfhealing tires?after d replacemnt?

Did everything but when I tried to put air doesn’t fill up. So my question is do I need a air compressor for it to work? Or can I just fill up in a gas station?

Ehh if you make a link to a website perhaps it would be nice if the website was also available in English?

What is the air compressor called how much is it I want to get one

와 잘보고갑니다 덕분에 배우고 가요^^

After mounting the tire, it wouldn't inflate. I even tried using a starting fluid and fire to seat the bead and it still didn't work? Do you have any ideas I could try?

I don’t get it back. Seems to be impossible. I needed 2 hours To get the tire off and now .... 😭

From where can I order tires for ninebot max? Is there any specific site on the internet for this?

I don’t understand how the hell you are able to just snap it back on like that?!

Does this tire fit to Xiaomi m365 PRO? and where to find them (tires only)?

Anyone know where to get the exact screw replacements for the bottom battery cover? A few have been damaged and after I get them off I won't be able to reuse them, so I need replacements. I was hoping I could get them from a hardware store.

Can anyone explain the how he uses the cable ties? I've got a problem to get the tire back on the rim

My inner tube won’t come out how do I screw it out

Will stickers pop these tires?

Do I really have to have this heavy presser? What if I'm running flat in the middle of nowhere. I need to have some easy kit with me at all times. What should such a kit include, and how to perform? Thanks!

What do you call the tools?

i had a xiaomi m365 before i got so much punchers😩 i want to buy this model do u think it will be better for the punchers ?because the road condition is very bad in montenegro

I have a question. Can the vavle be replaced? I have a bad flat where it seems the valave is busted every time I fill it up the vavle will stop at 21psi and start releasing the air. Thanks in advance!

Hello, Where I can find the same tool for changing the tire? Thanks

60/70 6.5 tires are such worst without having any brand names on the tires and you should watch james angelo tv on his video with segway ninebot g30 with blade gt parts and you would be surprised the way he built his into different and man he has bezt tuners ive ever heard

Hii I’ve just put new tire on my back one but I’m struggling to pump up 🤔

Hello friend, I have looked at your video, how to change the tire, my problem is that I buy a tire the same, I put it in its place and the air does not enter, try with the compressor and if the air entered, but 2 days later it went down again, you see that through the tongue The air comes out, by chance do you know if he uses any sealant or glue?

Is the process removing the tyre much easier than the Xiaomi M365 Pro since it doesn't have the inner tube anymore?

Missing some crucial information

If the old tire Is broken can i Just cut It?

Nice

sveiki,klausimas iškilo į šitą modelį nesideda kamera? nes mačiau i g30 dedasi,pas mane g30 II max,man isilyde gelis iš padangos,reikėtu pasikeisti

A que lado de la rueda delantera va la arandela ?

Does this tire fit to Xiaomi m365? Did You check it?

I have the same air pump. What is that attachment on the end you hooked up.

Why not use metal?

Heey i change the tire but when I try to fill it with air the air get out along the rim in 1 section. Any idea to fix it. It was a pain to get the old one off and the new one on?

is the rear fender a little bit twisted to right or mine is damaged? 🧐

Where can I buy the kit to remove the rim?

Does anyone know where I can get throttle & brake repairs in Los Angeles? Nine box max

please help, what size of that wheels nut? i need id so badly

How did you get the side panels off?

This video is missing crucial commentary. It took me 5 hours, seriously brute strength and 2 ppl to replace my tire.

Hello I have the same wheel flat I don’t know if send it to the company or do the whole process I see many video of the front wheel but this is the only one about the back one. Please help bro.

Bullshit there’s no way there that easy to change 😂😂

Hi thanks for your video, Where did you buy the plastic piece for remove the wheel (don't want to use iron tools) Thanks

Hast du ein link für das Werkzeug was du benutzt würde es mir gerne kaufen

4.5 bar 🫢?

This video is full of it everything he did in this video i tried the tire doesn't even budge i tried everything it won't even inflate enough fome to remove

How did you take the motor out

how can i get like your air compressor?

Just mute the music

Wait its all rubber

I really can not understand how you can install the tire so easily.... I tried 30 minutes and gave up...

do the max and the max g30 have the same tire size? i have a max on order

could do without all the loud noise !

kiek oro reikia pusti i max30 padangas? gal kas pasakys?niekur nerandu info apie tai.

Doesnt work for me. Anyone got an idea?

Thats one flimsy tire, mounting it by hand.......

I dont belive you can squeeze orginal tire like that. Put them on is almost impossible

Where do you get replacements for the g30 max's tires?

Hands down the worse wheel design I have ever worked on for a escooter, fitting the new tyre is nothing like shown. Taking it off was even worse.

What a nightmare

Does anybody know I got a segway max scooter my back tire started gushing out some sort of black gew around the rim but after watching this video it doesn't look like there's any thing inside this tire what can it be help

Save time and just cut the old tire off

Малко течен сапун и ще е по лесно

FAKE VIDEO. It is imposible to make by hand. They should have cut a strip of rubber to fit so easily.

Shitty advice. Using iron lever won't damage the rim, maybe scratch it a bit. Don't give yourself unnecessary stress by using the filmsy plastic level. Go ahead and use a proper long metal lever. It will make the job much more easier.

Hydraulics.😆

Changing the tire is not as that easy… Garbage

Why did you edit out your video at 2:26. Tire doesn't install that easily you liar

No sh!t you need an Alan key!!! but Hahaha wtf first 30 seconds dont use anything metal then first thing used is Metal 🤣🤣🤣 Next time just be like metal is used but don't be barbaric and use metal in bits it can damage