No video :(

How to Replace Water Pump 00-04 Ford Focus

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,5 млн

Просмотров 112 тыс.

50% 1

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEW...
1A Auto shows you how to repair, install, fix, change or replace a broken, bad, or leaking water pump. This video is applicable to the 00, 01, 02, 03, 04, Ford Focus.
🔧 List of tools used:
• Pry Bar 1aau.to/ofK/1AX...
• 10mm Socket 1aau.to/oLa/1AX...
• 15mm Socket 1aau.to/oRD/1AX...
• 18mm Socket 1aau.to/onP/1AX...
• 19mm Socket 1aau.to/onP/1AX...
• 8mm Socket 1aau.to/oLa/1AX...
• 1/2 Inch Breaker Bar 1aau.to/oif/1AX...
• Ratchet 1aau.to/o5a/1AX...
• Socket Extensions 1aau.to/oRD/1AX...
• Torque Wrench 1aau.to/oq9/1AX...
• Brass Punch
• Drain Pan 1aau.to/ofj/1AX...
• Hammer 1aau.to/oiy/1AX...
For More Info visit us at 1aau.to/h/bM3/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 117

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@clowsyior2002 4 года назад

I love the way she showed and explained everything and how they kept the camera in good view angles this was highly helpful

@1AAuto 4 года назад

+C Low Syior Thanks for checking us out! 1AAuto.com

@NikosDIY 4 года назад

Sue makes the best tutorials. Period. Thank you so much, just watched the timing belt and now this.

@1AAuto 4 года назад

+Nikos DIY Thanks for checking us out! 1AAuto.com

@paulleggett9735 3 года назад

Great video but I need advice. You take the engine mount off, then later the car is up in the air? Is there nothing supporting the engine on the Cambelt side when on the lift?

@joehyundaitech7961 Год назад

the camera work is just the best quality

@tdrewman 4 года назад

That car needed a timing belt too. If you look up How to Replace Timing Belt 00-04 Ford Focus, she is taking everything apart again and changing the time timing belt.

@kd5nrh 3 года назад

Was kind of disappointed they edited out the water pump change during that one and then spliced things back together to make this video. It's kind of a no brainer to do both together when either needs replacing because of the hassle of getting everything out of the way. Also a good time to replace the serpentine and its pulleys. (Trust me, you don't want to have a serpentine tensioner die in the middle of nowhere at night. Finding one and then replacing it on the side of the road sucks.) Plus a failed water pump can leak into the timing cover, which isn't good for the belt or the pulleys.

@NoahDoane Месяц назад

These are such solid little cars. Cheap, easy to work on, and reliable (as long as you didn't get the SPI motor lol)

@guysteel 4 года назад

Do you only need the engine support jack when uninstalling / installing the motor mount? I see it's not in place when the car is up on the lift. Thank you. Very well spoken narration.

@A0d0i00 2 года назад

Super movie. There are many videos on YT dealing with this topic, but I am delighted that you describe this exchange so accurately. Great respect for a good job, not one man should learn from you. I wish you every success.

@Trufriendship01 2 года назад

Working on it tomorrow, thank you for this video. Love her accent.

@clutch5sp989 2 года назад

Best tool I've bought was a Devalt 3/8" 12v impact driver. If you plan on doing more than one repair; it's worth it. Why they don't make the right angle driver is a mystery, but Crapsman offers a good one and has worked well. Makes a repair a little less miserable. Brr Brr Brrrr...all done. Always go back with a ratchet to check tightness !

@MikeHull4855 3 года назад

Great how to on this water pump, covered everything well, great camera views and good explanation for why you are doing it the way you're doing it. I'll definitely be watching more of your videos.

@joeboogiewiddahoodie6980 4 года назад

THANK YOU THANK YOU water pump is being picked up and this process is about to start I appreciate y’all

@1AAuto 4 года назад

+joseph gibson Thanks for the great feedback!

@bmwbryan1 3 года назад

Thanks guys. Its always nice seeing someone else doing what your about to do even if you do know what your doing, especially when its the exact same car same year same engine haha 👌

@michaelunderhill5497 Год назад

Like putting 2+2 on the calculator 😂 just in case

@SunriseLAW 8 месяцев назад

2003 Ford Focus zx3. I replaced my water pump. You do NOT need to remove the engine mount. Jack car up in front, place your jackstands. Remove the passenger front wheel and the backing material. Take off serpentine belt. Unbolt the water pump. It fits into the car like a 3-d puzzle. You have to put it into the hole and turn it exactly right as you feed it in, there is maybe a millimeter clearance and exactly one way it feeds in. I would have said impossible' but I actually did it successfully.

@chasewayne241 4 года назад

I love this lady

@pumpedupone Год назад

Whoever this woman is I wish should could fix my car! Really knows what to do correctly!

@lukefisher1858 Год назад

Thank goodness for this video.... Our coolant bolt was actually 11mm LOL

@ulyssesjones6096 2 года назад

great video just wish this went into further detail regarding bleeding the coolant system. Not sure if theres a bleeder valve for this specific cars coolant system or what, and im getting mixed feedback on how to go about bleeding the system of air before turning the car on. Im doing the alternator, waterpump, tensioner pulley, and idler pulley so i just need to know how to bleed the coolant system before i can move onto changing the oil and oil filter and then taking it out on its maiden voyage lol

@joshuanelsen8602 4 года назад

I just had my water pump go out. Pepboys told me it would be a 4hour job and cost 730 dollars. Interesting that it only takes 30 minutes and not 4 hours.

@nerdyup700 4 года назад

Joshua Nelsen - 100% - a mom and pop told me $300 which was ok, but this looks pretty simple. Great video

@finebooty1 4 года назад

Video is edited you plumb, running up bleeding and testing can take half hour on it's own, let alone remove and replace! A sensible time would be approx 1.5 hours to do the job thoroughly

@mrk7201 4 года назад

@@finebooty1 Exactly another 20 minutes half hour for test drive

@milotorres6894 3 года назад

350 max new pump included and new belt if needed 2 hrs. max ,maybe that included new timing belt while opened up 500 for additional labor and parts.,✌️🤔😔🙏❄️

@CarlosAguilar-de8rq 3 года назад

Pep boys loves to over charge and not pay the few good techs they have accordingly never waste your time or $ there most techs there aren't qualified to do the job I've seen brake pads that have been put on backwards, transmissions being drained confused with oil drain plug, brakes being bled with drums off and calipers off hahahaha the list goes on it's a dam playground just don't do it!!

@johnm.8742 4 года назад

I enjoyed watching your video. Excellent teaching skills and camera work. There were a few times that I was thinking, "I wish they would move camera a little more over to see that bolt hole" and the camera would move right then to get a better shot. Thanks! Subscribing.

@1AAuto 4 года назад

+John M. Thanks for checking us out and for the feedback! 1AAuto.com

@philipnewton7942 2 года назад

Great video You make these jobs look so easy but doing it yourself after watching these videos will save us hundreds of english pounds in garage cosy Just brilliant stuff live this chanel Phil i n stoke on UK

@mikedavis9923 Год назад

Timing belt looks minty fresh. No way it needs replaced.

@freakinme10 4 года назад

Great video , All the 1A Auto Parts are terrific . How about that timing belt , by the looks of it replacing it will be next video =)

@joehyundaitech7961 4 года назад

Hi sue I have the same impact wrench as you used to remove the wheel in this video

@stevenbond8168 Год назад

Nicely done she made it easy to understand and it made it easy for me to follow when changing out my own water pump on the same exact car engine ! Thanks

@stevefernandez661 4 года назад

Thank you so much for taking the time to make this video.

@eljaxon 3 месяца назад

Wow I've seen a lot of videos to do this, but this is by far the best one I've seen. So clear and each step explained carefully. Thank you so much. I'll be watching this a few times before I tackle mine. Quick question, if under high pressure, the coolant is coming out at a rate from the water pump, would that just be the water pump or is it likely to be the housing for it as well? Thank you so mucjm

@devinw1207 Год назад

I did this today and the bolt heads broke off and now I have to figure out how to remove them in such a tight space. Any ideas would be greatly appreciated. I only had the bolts torqued to 5 ft lbs when this happened

@xaviergonzalez5145 5 лет назад

Nice video! Congratulations! Great detail in every step!

@btd2516 2 года назад

Love that torque wrench, what kind and where did you get it? I have several clickers and an old beam type which still gets used now and then.

@Big_Joe570 2 года назад

There has GOT to be an easier way!

@Blabbermouthwoodworking 3 года назад

Yep this is the way to do it , The most important part is to lower the motor all the way to get that water pump pully out .

@mrk7201 4 года назад

Good job young lady

@luisalejandrorodrigueznola2616 3 года назад

Excelente trabajo y que costo tiene la bomba de agua yo tengo este problema , en mi focus 2001 saludos ..

@1mexikaner Год назад

Instead of changing out that water pump/serpentine belt like she said I'd be more worried about that timing belt that way it's cracked and all...

@silkyg3400 4 года назад

Great job and video thanks!

@daniellehouillier1113 2 года назад

Hi.great job showing thé Way you do thé replacement.defenetly look more of tour vidéo..good job 👌

@michaelfrazier899 Год назад

Fantastic tutorial. She has a great attitude. Fun to watch and listen to…if my wife was like her, we’d work on so much stuff together and have so much fun all at the same time

@christianhildenbeutel1026 Год назад

Thanks for the video you saved me hundreds. You rock 👍✌️

@nghisus 11 месяцев назад

3 out of 4 bolts stripped, highly suggest having M6 helicoils. And compare bolts that come with the new water pump to the old one, the new bolts in my kit was shorter.

@1AAuto 11 месяцев назад

+Nghisus Thanks for the feedback!

@vdub19681 3 года назад

Awesome tutorial!!! Thank

@1AAuto 3 года назад

+Hankins Hunch Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@bradprice8040 7 месяцев назад

I was making a guess at what my problem might be when my temp spiked and a yellow warning light came on. I had some smoke/steam blowing but it was on the other side. I added water and it seemed fine. I came here looking to see how hard it would be to repair but this work is taking place on the opposite side from the part I was thinking is the issue. Not sure how to proceed now.

@spacex2323 Год назад

Good job

@jtv3935 Год назад

Thank you

@mariusvasile9238 10 месяцев назад

Super Video!!

@Rat_Dessert 4 месяца назад

hey dad you in here watching this lol

@blaselaihipp1276 3 года назад

Why did you change the water pump? Was it leaking?

@edwardelliott5756 3 года назад

Lady knows what she’s talking about.

@1AAuto 3 года назад

+Edward Elliott Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@damianmarin8602 2 года назад

me encanta,

@joehyundaitech7961 Год назад

wow that timing belt is in need of replacement

@slammedls400 2 года назад

This can be easily done from the top side.

@robertomendoza2742 4 года назад

Muy bien explicado felicitaciones. Y me gustaría ver cómo cambio el soporte trasero del motor del Focus 2003 auto matico

@martinbelloso9380 3 года назад

Muy bien explicado grasias

@joelvarelajr6495 2 года назад

How are you holding the engine while the car is up over head?

@harrypatchell88 2 года назад

How did you raise the car with the engine jacked up?

@milotorres6894 3 года назад

Excellent job great inside info on this replacement thank you.,👍😊😎✌️🙏❄️

@superkari28 Год назад

hi did you put back the motor mount when you lift the car? or its posible to lift the car without the motor mount?

@97warlock 2 года назад

so you can replace water pump on this car WITHOUT removing the tiiming belt? had several people tell me on this car,which is same as mine both belts have to come off & will have to redo timing also ....just to replace the pump.

@OgresStump 2 года назад

How is she supporting the engine while she has it raised into the air? The Jack is holding it when near the ground...??

@toniapaulsen6194 Год назад

Can anyone tell me if the 2000 factory installed water pump impeller is plastic or metal? My dad is trying to diagnose a problem for me and he needs to know. TIA

@jeffcuevas5918 4 года назад

Great video

@1AAuto 4 года назад

+Jeff Cuevas Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@rjasontwenty1099 2 года назад

thanks, now i know why i have to pay that much....another time i buy another car if water pump is being involved lol

@lancebryan5596 5 лет назад

Hello, I’m having trouble finding any videos about mercury mountaineers and the lift gate handle or latch not working. More than anything I would like to know how to take off the interior panel for the lift gate. Please help me 1A Auto

@lawrencemasuku6101 Год назад

God bless her

@hardykembara9003 Год назад

This same 2002 Ford focus right

@kingreyna 4 года назад

I'm in the process of doing a water pump and know why it has all that gasket maker. That o- ring doesn't seal. It doesn't press against the housing. It constantly leaks and pours out the water. May just have to glob it up with some permatex. Very irritating problem.

@ypautomotriz 3 года назад

hellow, what liquid you use for clean pulley pump?

@christomartindale 2 года назад

Nice job . Would you take a look at that timing belt 🤔 😏 😳

@nellyps3 4 года назад

Where do I get the housing for the water pump?! I have a 2002 SE dohc Ford Focus.

@TheAndy331 Год назад

Came here to see how many people seen that timing belt 😮

@misaelsanchez2327 4 года назад

Is the same engine of a escort zx2?

@stuartraydroge5021 3 года назад

Same concept, slightly different displacement. The focus uses either the 2.0 dohc to the 2.3 dohc. This should be the same though

@adejolaolivera9910 3 года назад

like from Uruguay. Have you some video about motor endura-de desing for ford. I have escort 1998 gas-oil. sorry for my english

@1AAuto 3 года назад

+Adejola Olivera We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c

@rohanwilson4724 9 месяцев назад

How to replace water pump on 2002 Ford Focus

@2008DJEvolution 2 года назад

that timing belt though

@bills396 4 года назад

At 12:13 in the video we see the vehicle raised with the technician under it and yet the engine is not falling out of the car even though the passenger side motor mount has been removed. Please explain how to do this.

@mrk7201 4 года назад

There are other Mount holding

@finebooty1 4 года назад

Great video, only major criticism from myself working 25 years in the trade...... where are your wing protectors? Spanners, levers, sockets and even clothing with buttons can all damage paint and body work ! Don't learn the hard way as it can be extremely costly. Well done though

@1AAuto 4 года назад

+simon swallow Thanks for the feedback and for watching!

@97warlock 2 года назад

7:42 TB Cover is OFF 8:03 tb COVER IS on NOW THATS WEIRD

@gazza9919 2 года назад

Thats such a long winded way of doing it. I mean if it works for you then it works but there are honestly quicker ways of doing it. I just dropped the engine onto a jack and replaced the alternator belt and water pump. No need to take the wheel off, remove the coolant resivua or even remove the whole engine mount

@marianluc6235 5 лет назад

Yep ford using the 18 mm why in the world they don't put a 19 mm.

@KGisthename 4 года назад

Are you being serious?

@juanignaciomaciassierra5834 2 года назад

Como cambiar las balatas de un aveo

@1AAuto 2 года назад

+Juan Ignacio Macías sierra We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c

@barbarinotorres7336 4 года назад

No necesitó silicona alrrededor?

@1AAuto 4 года назад

+Barbarino Torres Thanks for checking us out! Silicon is not needed with this replacement as the gasket will keep things sealed when it is bolted down.

@pedrosanchez-xg9mb 2 года назад

Ford couldn't leave at least a 1inch gap between engine and frame to get the pump out more easily 🙄

@frankmontez6853 2 года назад

2016 Focus SE 2.0L duratech engine . gotta ask this dumb question - Can bad water pump mix water and oil together ? I think it's totally bogus . yeah I know it can ruin engine by overheating but not this right ? Bogus claim by this "mechanic" that bad pump cause water and oil to mix?

@purpledoge4466 5 лет назад

That timing belt has soo many cracks is nor funny,maybe shows us how to replace it?

@adrianprado1099 Год назад

my water pump is so hard on there that it literally will not come off

@russelllovett4272 4 года назад

has this car been sitting in the garage for 19 years, or is this your dummy car you work on for videos? please do a video on one that's been driven in Ohio for 19 years with rusty bolts and corrosion and build up from many years of fluid leaks. thanks!

@1AAuto 4 года назад

+Russell Lovett Thanks for watching! The vehicles used in our videos are used in everyday life by employees or ones that are purchased to work on.

@solo9619 2 года назад

Same bro

@josephherron7671 2 года назад

You should REALLY change that timing belt while you're in there. That belt is shot and if it breaks it's going to trash those valves. That's an interference engine. Don't put that off.

@slicknslidin4124 Год назад

Not an interference engine

@steveobeanz76 4 года назад

Someone at least put money back in that car

@johnteasdale2181 Год назад

A few little mistakes, but not bad. She obviously enjoys her work. She wears rubber gloves for dirt, but believe I see at least one ring and definitely a wrist watch; absolute no-no's for mechanics! Am I the only one that see's that the front rotors are on the wrong side of the vehicle!! Wise-up!