How to Replace Windshield Washer Fluid Pump 06-11 Toyota Camry

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,4 млн

Просмотров 63 тыс.

50% 1

For More Info visit us at: 1aau.to/h/Rn/
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, or failing windshield washer pump. This video is applicable to the 09 Toyota Camry.
This process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oBF/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oBF/1AXAA00013
• 10mm Socket 1aau.to/oxg/1AXAA00017
• Trim Tool Set 1aau.to/ojk/1AXXX00006
• Ratchet 1aau.to/oD7/1AXAA00016
• Torque Wrench 1aau.to/orQ/1AXAA00044
• Painter's Tape
Subscribe: / @1aauto
Check out our playlist:
Toyota Camry 2007-2011 6th Gen (XV40): • Toyota Camry 2007-2011...
Toyota Auto Repair Videos: • Toyota Auto Repair Videos
For More Info visit us at 1aau.to/h/Rn/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

11 окт 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@rgonzalez4209 4 года назад

Just finished doing on my 2007 Camry I didnt even touch the bumper. Just remove the wheel and fender liner and boom done.

@harrirrapaj1836 5 лет назад

Good video, but no need to remove the entire front bumper.

@johnbouldin9033 6 месяцев назад

Thank you! I replaced the tank and motor this morning including taking off the bumper. Very simple however it didn’t solve my problem 😂😢. I unplugged the hose and fluid goes all the way to the splitter for the sprayers . This car sat and the sprayers may not have been used for years. Diagnosed after replacing parts. Doh!

@NigadooNB Год назад

Thank you for going trough this! I just changed mine on my 2011 Sienna today after following your video. However I did not remove anything from the top, only took bottom plastic part, it was a little tight space to get the pump out but I managed without too much effort.

@MrPrios1 11 месяцев назад

Super nice video

@dumpatronix 3 года назад

Thanks for this very helpful video. Followed same general process for my 08 Highlander and it worked! Pretty easy job and steps were relatively straightforward. If your car is old as ___ like mine, might want to stock up on those replacement clips. I didn’t, so I resorted to zip ties… I did read comments that this would be an easier job if you left bumper on and just took wheel off. Gotta say I don’t see this being much different time wise. This way took me about an hour with interruptions.

@chrisratchford8153 4 года назад

Great video. I have a 2008 Scion xB. I did not have to remove the front clip. I just jacked up the front of the vehicle, removed the passenger front wheel and fender liner. Unfortunately, I broke a couple of the plastic fasteners but was able to buy some replacements. I would recommend NOT removing the front bumper unless you have to. You definitely don't have to with a 2008 Scion xB.

@Dhi-fe5eu 2 года назад

Great video.

@JoeAnshien 3 года назад

I have a 2010 Sienna - Would it be the same? Looks like the washer reservoir is in the same place. Thanks Joe

@rakun1212 6 лет назад

Why did you take off the whole front clip? Couldn't you have taken off the wheel and just the fender liner to access the pump?

@1AAuto 6 лет назад

+rakun1212 This is the recommended procedure for the repair. 1aauto.com

@Charlie_Crown 6 лет назад

rakun1212 In fairness he did mention you could try that, I certainly will be trying that first for sure, may not even have to remove the wheel. Good video.

@kelisurfs247 5 лет назад

This guy is making it look really hard so you will give up and take your car to a mechanic. Duffus

@timevans4981 3 года назад

Thanks for the video but it’s Way easier to just unbolt the four 10mm bolts and the quarter turn fastener and move the inner fender out of the way. I could see removing front bumper cover if you have to change out the tank. Otherwise no for just changing out pump.

@1AAuto 3 года назад

+tim evans We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair.

@huanweili7699 3 года назад

Not sure why you had to remove the bumper for this job. You just created more work for yourself. Hehe. All you had to do was just remove the fender liner out of the way and the pump sits right there. 😆lol.

@chandler0017 3 года назад

Excellent video! And for those saying "why did you take off the bumper... [etc.]", it's a lot easier to show the viewer the washer fluid reservoir and pump for the cameraman (with plenty of light, might I add) by removing the bumper, than to try and cram a smaller camera through a skinnier, darker path. Man, people are so hawkish.

@luissantiago147 10 месяцев назад

There’s no need to remove the front bumper. Just remove the front passenger tire and the inner liner and you’ll have full access.

@toddwardell2617 2 года назад

Nice, I got to see a big fat hand grab what I think was the pump and rip it out. Well, moving on and maybe the next video will show me how to remove the pump.

@lincolnecho7699 4 года назад

Can you let me know the type of tools you used?

@1AAuto 4 года назад

+Lincoln Echo 🔧 List of tools used: • Flat Blade Screwdriver • Phillips Head Screwdriver • 10mm Socket • Trim Tool Set • Ratchet • Torque Wrench • Painter's Tape Thanks for checking us out!

@stephanieselleh439 2 года назад

Good video, but removing the front bumper is absolutely ridiculous and unnecessary. Also, this car is way too clean, so I bet it didn’t t even need to be replaced. This is why shops over charge and waste the customer’s time.

@TheDarkestForce 4 года назад

Am I missing something... where is the link to your site for the actual pump?

@1AAuto 4 года назад

+TheDarkestForce Thanks for checking us out! There is no fuel pump directly linked to this video ut if you would like to provide the year make and model fo your application as well as engine size we can see if we offer the correct pump for you. You can also contact us at 888-844-3393 and a representative would be more than happy to assist you, thank you!