How to Replace your Ferguson TE20 Front Gearbox Seal.

Подписаться 50 тыс.

Просмотров 27 тыс.

50% 1

Please support our channel by purchasing merchandise here: bundybearsshed.com/
Hello Im Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advise to customers.
Parts seen in our videos can be purchased from www.queenslandtractorspares.co...
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email info@queenslandtractorspares.com.au and we will help where we can.
I do try and help with technical advise at bundybearsshed@gmail.com if you have a question or are having trouble with your project.

Авто/Мото

Опубликовано:

31 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@alanhughes1262 9 месяцев назад

your a good mechanic mate , i brought a 49 tvo 12 years back needs a new seal leaks badly for 12 years i just tip the gearbox oil back in to big job for me to fix the leak no one around here works on them , i have mowed 5 acres 5 times a year last 12 years long grass also post holes for ham radio antennas driveway grading in vic gold fields , brought a zero turn 3 years ago belts wear out this that but no way as much fun as driving the old grey around. .

@BundyBearsShed 9 месяцев назад

They are a handy thing alright, Its a shame there isnt a local bloke wanting to give it a go for you.

@dianer777 2 месяца назад

Thanks Lance, much appreciated, I have a better idea on where I'm going now. Cheers.

@BundyBearsShed 2 месяца назад

Glad to help

@richarddeacon6481 Год назад

Legend! My 54 te20 is sat in the corner of my paddock waiting for my to sort the clutch. Watching these vids has given me the confidence to get in the garage and sort it😀

@BundyBearsShed Год назад

Go for it, you will get some satisfaction from doing it yourself

@matthewevans6171 2 года назад

Thanks for making these videos mate, they've been a real help when working on my ted20. Input shaft seal was todays job, rear crankshaft seal tomorrow. 👍

@BundyBearsShed 2 года назад

Glad to help

@PTM092 2 года назад

I have video about crankshaft rear main seal replacement.. Go through my channel and watch video... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vDcqDYHl1p4.html

@davidthomas1732 2 года назад

Your a Rippa Lance. You help a lot of people.

@BundyBearsShed 2 года назад

Thanks David, Glad it helps.

@onthewindyside 2 года назад

I love hearing the creaking roof and the critters, makes me feel like I'm there 👍, and the best bit is that I don't have to clean the sh*t off the parts!

@BundyBearsShed 2 года назад

Im a one man band so I do the lot. No apprentices any more.

@kevinpfaff2301 2 года назад

G'day, Lance. Another great lesson from you. Many thanks.

@BundyBearsShed 2 года назад

My pleasure!

@PTM092 2 года назад

For any information regarding your tractor issues please visit my channel.. Also watch this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vDcqDYHl1p4.html

@charleshart6992 2 года назад

Excellent series of videos!

@BundyBearsShed 2 года назад

Glad you like them!

@paulbuxton5531 2 года назад

A1 tutorial Lance, Cheers, Paul.

@BundyBearsShed 2 года назад

Thankyou.

@TheKnacklersWorkshop 2 года назад

Hello Lance, Very well explained... thank you... Cheers. Paul,,

@BundyBearsShed 2 года назад

Glad you liked it

@charlesvanderwolf5751 2 года назад

Thanks Lance. Once again an excellent video

@BundyBearsShed 2 года назад

Thanks again!

@ryno8547 2 года назад

Hi Lance I finally bought a nice 1951 ted yesterday went 410 miles for it but was worth it I have been and looked a few that was junk love 🇬🇧

@BundyBearsShed 2 года назад

Good to hear, Its always a bit exciting to get a new Fergy.

@daveharr7969 2 года назад

Thanks for your excellent video.

@BundyBearsShed 2 года назад

You are welcome!

@TheSrphatness Год назад

Thank you Bundy Bear !!!!

@BundyBearsShed Год назад

You are welcome.

@alanmitchell7322 Год назад

Hi Lance when you started reassembling the clutch did you make sure the we drain hole in the shaft casing was on the bottom. Just wondering. its been a well explained video's for the TE20 clutch repairs very interesting as Iv got one to do. Cheers FM

@BundyBearsShed Год назад

Yes I did, Im not sure if I mentioned it now it has been a while.

@jaydwelley8043 2 года назад

Hi Lance, Just wondering if the drain hole in the input shaft housing shouldn't be on the bottom?

@richardl7161 2 года назад

It does look like it's on the top, but it was on the top when it came out! Perhaps there's a hole top and bottom.

@BundyBearsShed 2 года назад

There is two, one at the top and one at the bottom. i probably should have mentioned that.

@BundyBearsShed 2 года назад

Yes, spot on.

@rbhhbr5022 2 года назад

Lance love watching your videos first and foremost. I also appreciate that you reply to comments. I think this will be my 4th over the years, Is there a reason you didn't pack the bearing on the shaft with grease? Would that not of helped keep it tighter longer? Plus I can't imagine much oil gets up in there.

@BundyBearsShed 2 года назад

When the gearbox is spinning and the bottom shaft is down in the oil there would be a lot of spray around. I think the grease would wash off reasonably quickly.

@jarlathhunt 11 месяцев назад

Hi Lance, is the flange housing for the input shaft the correct part description, i need to get my hands on one cheers

@BundyBearsShed 11 месяцев назад

I would call it the front gearbox bearing support.

@claytonpalsson3104 2 года назад

it looked a bit scratchy on the bottom of the bell housing I thought, it probably was just light reflection. thanks for the vid.

@BundyBearsShed 2 года назад

No worries glad to help.

@horsetraining101 Год назад

hey lance, it"s me agian was wandering if this is the same as on a massey 65. i have my 65 split in half for a clutch and oil was everywhere in the housing? also what about the seal under the one you did in the video, is there any way to replace that one with out tearing more stuff down? thanks

@BundyBearsShed Год назад

Yes you should be able to do the gearbox one

@danieledistefano3651 2 года назад

Just awesome.

@BundyBearsShed 2 года назад

Thanks.

@niallbrady187 Год назад

Lance is that the excact procedure for a massey 35.? Thanks Niall

@BundyBearsShed Год назад

No the 35 is similar to the box I did in the MF135 6 speed playlist.

@alwenajones6076 2 года назад

very informative, thanks."John North Wales"

@BundyBearsShed 2 года назад

Glad you enjoyed it

@arco7835 2 года назад

Good morning mr. Lance! a question: when I fill the gear oil into the tef20, I can never reach the maximum level on the dipstick because the oil drips from the drainage hole under the clutch bell. which gasket should be changed to solve the problem? I hope you can help me! and I sincerely thank you for the very useful videos you make, very very useful for me! (sorry if i wrote something wrong, i'm italian and i'm learning)

@BundyBearsShed 2 года назад

Probably the front gearbox seal it should be the same as the job I do here in this video.

@arco7835 2 года назад

@@BundyBearsShed Thank for the answer! i'm going to prepare all it's needed to split my tractor and change that seal. thank you very much

@PTM092 2 года назад

You should change crankshaft rear main seal.. I have a video on this issue go through this link and watch video.. For more further information please subscribe my channel.. Thanks ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vDcqDYHl1p4.html

@peterdabrowski2328 2 года назад

Amazing lance! Two questions; is this the same process for a petrol mf35? And do you have to drain any of the trans/hydrualic oil to prevent any of it coming out when removing the 4 bolts?

@BundyBearsShed 2 года назад

On a 35 yes drain the oil as you need to remove the two plates.

@peterdabrowski2328 2 года назад

@@BundyBearsShed Thanks and Bugger!! Just had fresh oil put in.

@LouisMcNabb 2 года назад

@@BundyBearsShed I’m about to put in a new seal and thrust bearing on my TEA, would the oil in the gearbox need to be drained in a TEA?

@BundyBearsShed 2 года назад

@@LouisMcNabb no you should be good

@jarlathhunt2814 7 месяцев назад

What part number is your seal, I need one of them foe my te20

@BundyBearsShed 7 месяцев назад

S.10231

@hondaman8875 2 года назад

Hi lance love your videos. What was the seal part number was it sparex.

@BundyBearsShed 2 года назад

Yes Sparex S.10231 1 3/4 x 2 x 5/16"

@lesliehaire7229 2 года назад

Think I have put my input shaft seal in the wrong way round Lance ...bugger ! would explain the small oil leak when its parked after a run

@BundyBearsShed 2 года назад

Yes with the seal around the wrong way it wouldnt work correctly. The spring towards the oil is a good rule of thumb but with a new seal the spring tension mat help you out for a while.

@lesliehaire7229 2 года назад

@@BundyBearsShed thanks Lance another job for the future

@jeskasper 2 года назад

How do I check if the seal is "home"? I have it protruding just a hair from the surface and I am unable to knock it further down. I don't have a 51 mm iron disc, but turned a walnut one on my wood lathe. However, I am not sure if it is all the way down as the wood does not resonate the same way an iron disc would.

@BundyBearsShed 2 года назад

Try and fit something like a feeler gauge behind it

@kt3537 2 года назад

Great for future reference 🤠

@BundyBearsShed 2 года назад

Sure is we live in good times.

@deranocasper 2 года назад

Hello Lance how are you I drained the oil from the back end of my ferguson tvo and the gearbox would it be possible to wash the gearbox and back end using compresser and paraffin to wash it and drain would this work cheers 🍻

@BundyBearsShed 2 года назад

Yes you can! but make sure you get it all out. Diesel may be a better option.

@PTM092 2 года назад

Yes Lance is right.. Because after washing some diesel remains in gearbox and make your gear oil thin..

@PTM092 2 года назад

For more details about tractor issues please subscribe my channel too and watch videos about tractor issues solution