How To Sand Teak | Full Teak Restoration Tutorial | Mirka USA & Starke Yacht Care

Подписаться 56 тыс.

Просмотров 88 тыс.

50% 1

In this boat detailing tutorial, We will go over how to properly sand the teak deck on any boat . It is very important to sand teak properly if you want to make it last for years. We go over our exact system for sanding and restoring teak using Mirka USA Sanding Gear and Starke Yacht Care Teak Clean. If you want to learn how to detail a boat like a pro watch this video! All of the boat detailing products used in this video are linked below! 👇
#boatdetailing #boatdetailingtips #starkeyachtcare
🧼 Boat Detailing Products
www.detailusupply.com
🌎 ONLINE BOAT DETAILING TRAINING COURSE!
www.detailuni.com/Live-Record...
🌎 Join Our Boat Detailing Facebook Group!
/ boatdetailingpros
📸 Follow Drake On Instagram
For Daily Tips and Tricks / drakes.detailing
Products Used :
Step1
( I Couldn't find the 8 inch sanding discs in the video, so get a 6 inch backing plate for the rotary and just use Mirka Abranet Ace HD 40 )
- Makita Rotary Buffer
- 6 inch rotary backing plate
- Mirka Abranet Ace HD 40 Grit
Step 2
- Mirka Abranet Ace HD 60 Grit bit.ly/2L56gIv
- Mirka Dust Extractor 1230 HEPA PC 120V bit.ly/36sGBRs
- 6” Vacuum-Ready Electric Sander bit.ly/2Yun1zN
- Vacuum Hose with Electrical Coaxial 1" x 18" bit.ly/3rjS9yz
Step 3
- Mirka Abranet Ace HD 80
- Mirka Dust Extractor 1230 HEPA PC 120V
- 6” Vacuum-Ready Electric Sander
- Vacuum Hose with Electrical Coaxial 1" x 18"
SANDING ( Remember NEVER Sand Higher Than 80 Grit On Teak Floors )
Step 4
- Starke Teak Clean A & B
- Shurhold Brush handle amzn.to/3j98YII
- Shurhold Brush amzn.to/34w0TsR
- Water Hoes amzn.to/333K6MS
- Starke Pure Clean Boat Soap
Camera Gear:
- Gopro 9 Used in This Video! amzn.to/39I3wdJ
- Camera Used in All My Videos! amzn.to/2WitD3b
- Microphone Used in All My Videos! amzn.to/37jYAu2

Авто/Мото

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 168

@joshsalas4735 3 года назад

Hi Drake. Just Strted Watching your Videos. Love how you take Pride in your work. I Own a Yacht Restoration Company in FL.. What might save you time and Paper. Is, in the Begging of the Job. We Prep the Teak decks by using a New 1.5 inch Chisel with a 45 angle on one end,, to actually shave the Caulking down first. It usually cuts it like butter. Then when you start Sanding Process, you are already sanding Flush and don't have to worry about sanding through Caulking First. Love your Channel

@DrakesDetailing 3 года назад

Thanks man! I'll give that a shot next time!

@TheFishingMommy 3 года назад

Gorgeous results! I have teak trim on my boat with lots of “peaks & valleys” & I’m going to borrow your techniques on it!

@RaldasDetails 3 года назад

My favorite boat detailing channel!! You’re that man bro😎👍🏼

@DrakesDetailing 3 года назад

I appreciate that! Thanks bro!

@satoriwabisabi 2 года назад

i learned so much from this video. listen, i literally have to do this job tomorrow and it will be my first time, watching this video has given me lots of confidence. thank you.

@DrakesDetailing 2 года назад

Thanks for watching! Good luck! I make it look easy ha

@JayDubber 3 года назад

Nice job! I now have the confidence to add this to my service. 🙏🏼

@DrakesDetailing 3 года назад

Awesome!

@ivanildoalmada5458 Год назад

Man, I am about starting a new company and your video is giving so much help...thank you;;Best video ever

@DrakesDetailing Год назад

Thanks for watching, so glad I could help 😎🔥

@rare1a140 3 года назад

Sup drake hey I use a razor blade to level the caulk before sanding. Curl the corners so they don't snag, keep it at a low level and the excess caulk comes off quick and easy. Knocks down on your sanding. I second the forced rotation da - I like festool for this. Nice vid bro.

@DrakesDetailing 3 года назад

Thanks for the input! Appreciate you watching! Festool is a great machine as well

@deejayclement Год назад

I used the Semco on my freshly grinded teak deck and it looks beautiful. I chose the transparant teak sealer (semco) and it looks great. Thank you for the advise with the semco product, and great video with easy instructions! Thanks mate.

@DrakesDetailing Год назад

Thanks for watching!

@markhinds1808 3 года назад

Its just what I wanted to see and what a great job and well explained

@DrakesDetailing 3 года назад

Awesome! Thanks for watching!

@ElevateYacht 3 года назад

Great detail and explanation. Keep up the great work!

@DrakesDetailing 3 года назад

Thanks for watching!

@tommyloky4489 3 года назад

Really nice looking. And so nice to see NO oil on it. All natural and beautifull ;)

@DrakesDetailing 3 года назад

Yep! Thanks for watching

@tateabney5557 2 года назад

Killer video!!! I love it thank you!

@DrakesDetailing 2 года назад

Thanks Tate! 🔥💯

@lakekeoweedetailing 4 месяца назад

Great video, very informative as always! Looking forward to using what I learned in this video on my upcoming boat restoration for my client.

@DrakesDetailing 4 месяца назад

Glad it was helpful!

@matthieubidal4288 3 года назад

Excellent ! Just like every other videos !

@michaelronquillo3842 3 года назад

That was a valuable lesson. Thanks Drake. I absolutely would have screwed that up if i had not seen this by using too fine of grit sandpaper.

@DrakesDetailing 3 года назад

I appreciate it! Thanks for watching!

@kenw772 Год назад

Great job and super tips on treating teak, thanks

@DrakesDetailing Год назад

Thanks for watching!

@itdafuzz 3 года назад

Another incredible knowledge bomb! Appreciate it brother 👍

@DrakesDetailing 3 года назад

Thanks brother!

@jonathankaplan5391 3 года назад

Great video Drake, thanks for the awesome information. Also to whoever disliked this video, why don’t you teach us how to do it better.

@DrakesDetailing 3 года назад

Heard that bro! haha Im pretty sure someone subscribed just to thumbs down all my videos ! kinda funny to me.

@MikesAutoDetailing 3 года назад

Drake, great job stay safe

@DrakesDetailing 3 года назад

Thanks brother

@sachachanyan 2 года назад

Extremely helpful, thanks!

@DrakesDetailing 2 года назад

So glad I could help!!

@jacksonmcdonald5409 3 года назад

Another solid video learned a lot once again. I was wondering after watching your non skid buff video if that’s something you include in a wash and wax package or an up charge. If you don’t always buff the non skid do you wax still or just top off with Si coating. Can’t thank you enough for the high quality detailed videos been watching for months now🤙

@DrakesDetailing 3 года назад

In my wash and wax package I only use the Si02 on the non skid. To wax non skid or buff it, it’s an extra charge.

@doozy1955 2 года назад

Great job, thanks for the information.

@DrakesDetailing 2 года назад

Glad it was helpful!

@chrismiami8 3 года назад

How do you like the Mirka sander ? I Just bought it a couple weeks ago It looks beautiful what you’re doing

@TheMarpalm 3 года назад

Oh to have young knees. Great video. Any thoughts on how to protect gel coat besides just “being careful”? Thanks

@beaulster 3 года назад

Wow dude. Wow!!!

@DrakesDetailing 3 года назад

Thanks!

@anotherdaywithjana7286 3 года назад

What process do you recommend for restoring interior teak flooring?

@mohsinvalliani3180 3 года назад

Thank you for sharing. Very informative. Hope some day you make a video of how to deal with damaged teak caulking and how to apply fresh caulking. Thank you bro.

@DrakesDetailing 3 года назад

Thanks bro! I don't do re caulking, I sub that stuff out!

@williejones5439 2 года назад

Am diong teak work so am watching thanks bro

@DrakesDetailing 2 года назад

No problem! Thanks for the support!🔥

@michalbernad8464 2 года назад

Great work and good video ! Regards

@DrakesDetailing 2 года назад

Thanks Man! 🔥

@calebfulford9708 3 года назад

Great video. Teak is a porous wood or “open grain” which is the peaks and valleys you were talking about.

@DrakesDetailing 3 года назад

Thanks bro!

@lousisanimalr718 3 года назад

Hey just starting to follow you love your videos your videos help me out skit I’m starting my business soon trying to learn as much I can from you then I’m out 😆. But I wanted tell you I follow you yea little for the videos but mostly cause your energy positive vibe like I am in real life doing things right helping people. So that being said I would love to see more rvs and card if possible. Please. If I not I understand. Your a busy man I have 3 kids believe me I understand. Keep up the great work stay safe and healthy. Keep in touch not in a weird way lol 😆 earthier

@DrakesDetailing 3 года назад

Thanks I appreciate you watching and supporting the channel! I flip jobs as they come, when I book an RV I'll video it!

@rationalinvest 3 года назад

Beautiful

@loveniacannon3302 11 месяцев назад

Very user friendly.

@DrakesDetailing 10 месяцев назад

Indeed!

@alexle4347 3 года назад

Awesome video! How do you recommend cleaning teak surfaces? Do you think a soft brush and boat soap will do the job to maintain?

@DrakesDetailing 3 года назад

Thanks for watching Use pure clean to wash the boat and teak once every 2 weeks or so. Use starke teak clean to clean teak once every 3 months - Starke Teak Clean A & B bit.ly/2YrT57z - Starke Pure Clean Boat Soap bit.ly/3tdTDMg

@thomasstewartii1487 3 года назад

How do you price between just a Teak wash/clean decking, Sanding of decking or Toe rail, and sealing toe rail?

@joeymungo3366 10 месяцев назад

Thanks Legend🤙

@DrakesDetailing 9 месяцев назад

Anytime bro 😎

@MRScrubNasty 3 года назад

Good cheaper alternative to the Mirka system is a Bosch GET65-5n or -6n with a shop vac and sanding mesh. Great dust collection and having the forced rotation with dust collection is hard to find. I own 3 of them in my boat repair shop. You did a good job explaining this though. I love watching your videos bro. I remove the caulk and recaulk if the customer is going to pay for it, otherwise it's best imo to use a 2 part teak cleaner as it really does a good job. Totalboat has a decent 2 part cleaner. Never fall for 1 part teak cleaner.

@DrakesDetailing 3 года назад

Thanks for the input! I appreciate it

@MattyMattnj1 2 года назад

Is it okay to get the part A and B on the gelcoat or the outside of the hull if you're doing teak gunnels?.... also is it the same 80-grit process for teak gunnels?

@DrakesDetailing 2 года назад

It should be fine, just make sure that you rinse it off the gel quickly. Nothing sitting on the gel for too long is ever good

@setharnold999 2 года назад

Not going lower than 80 for flooring is a good idea thanks for the tips

@DrakesDetailing 2 года назад

You bet!

@alisonrahn9873 3 года назад

How much did you spend in expenses and charge for the job? Do you measure out how much teak there is or go by day?

@hughsmith4464 2 года назад

Hi Drake, since you don't like oils.... What do you use when teak oil has been used on it?

@DrakesDetailing 2 года назад

Just strip it with a good degreasing stub, then do all the same steps! 😎

@jefferysmithwick1651 3 года назад

Why do you not use Semco?

@sam-bartlett Месяц назад

Hi Drake, a question - I have both fibreglass and teak restoration to do on my boat; which should I do first? Thx

@DrakesDetailing Месяц назад

I’d do fiberglass first… then teak

@MattyMattnj1 2 года назад

If you just doing a small section like hoverboards instead of buying part A and Part B in quantity can I just use a diluted solution of muriatic acid?

@DrakesDetailing 2 года назад

I suppose you could, but I like staying consistent with every job like this

@stevewarner1575 3 года назад

Thank you for your videos. I've learned a ton. I was binge watching past episodes and purchased a few products after. In addition to other recommended tools, I purchased Jescar Power Lock, Woody Wax, and McKee's Nautical One Hydro Rinse SiO2 Coating. The problem is I can't remember what to use where - do you have a cheat sheet?

@stevewarner1575 3 года назад

More specific- the non-skid. Woody or McKee?

@DrakesDetailing 3 года назад

Thanks for watching! Jescar will be your wax on smooth gel coat, you can also use it on your non skid. Apply once every 4 to 6 months. Woody wax is great on your metal! Hydro rinse is great as a topper on the Jescar, once a month or so after washing, spray on the product and rise off immediately

@stevewarner1575 3 года назад

@@DrakesDetailing one last question. After I lay the wax down, should I keep using Purple Power for regular washing (dirt, fish blood, bird poop, etc.) or switch to a boat soap?

@DrakesDetailing 3 года назад

Switch to starke pure clean! It won’t hurt the wax. drakesmarinedetailsupply.com/collections/starke-surface-technology/products/starke-pure-clean-boat-soap

@richiesquest3283 4 месяца назад

Hi Drake i have dropped oven cleaner on my teak floor its gone jet black would you think sanding will remove it.

@DrakesDetailing 4 месяца назад

Try a small spot and see. It depends how long it has soaked for… it may only be on the surface layer, or it could have soaked through the entire plank of teak.

@martybernal8977 2 года назад

Thank You, I really needed this info, with so many videos on teak diy this was very informative and helpful. I have 2 questions… 1) I know you mentioned no oils/stains but do you have a video on diy oil/stain application? 2) how do I do the trim or get those close edges I avoid?

@DrakesDetailing 2 года назад

I do not have any videos on teak oil because I do not like or use it 😎

@martybernal8977 2 года назад

@@DrakesDetailing none of your customers have requested it, if one does can you video it?

@derekw6898 2 года назад

@@martybernal8977 I work at a marina and sand/oil teak often. I always double tape around the edges of the teak to prevent nicking the gelcoat. Those tighter areas that you can’t get with a sander will require hand sanding as best as you can. I use Star Brite Premium Golden Teak Oil and literally just use a rag to apply it and I always do 2 coats. It’s a brighter stain and looks great. Happy customers every time

@richardnye3469 Год назад

Can you use a Flex 3401VRG for sanding along with a shop vac? I'm a DIYer on a 57 foot trawler and I have a large cockpit, side decks and Portugeuese bridge with teak decking. I use the Flex for polishing gelcoat, and it would be great to use that for sanding as well. What are your thoughts?

@DrakesDetailing Год назад

I personally would not. The 3401 is too powerful for sanding. Stick with a DA for sanding.

@williamanderson9714 Год назад

i have some teak on my old sailboat that the previous owner finished with polyurethane and it is now flaking off in some places. i can't seem to find any videos on refinishing teak that has been sealed with polyurethane. how would I go about that?

@DrakesDetailing Год назад

You will just need to sand it back down to bear wood and through all the crap, then re-stain

@shaynegriffiths3396 3 года назад

Can you do do a full review on that mirka sander

@DrakesDetailing 3 года назад

Ill put that on my list!

@skatejoni1 2 года назад

Why you arent usung the mirka sander for wetsanding? I use the mirka so what difference is it to use a da?

@DrakesDetailing 2 года назад

There is no difference, I personally use cheaper machines will wet sanding because they tend to go out or break more often with water.

@StefsEngineering Год назад

nice job! Also nice fishing chair, that one is not cheap..... Release Marine Tirllion (or carolina) fighting chair

@DrakesDetailing Год назад

No doubt! Those fighting chairs are crazy expensive!

@dalelatty6072 Год назад

Looking to hire out a teak deck refinish in the Brunswick, GA area. Can you give me a general idea of expected pricing per sq/ft?

@DrakesDetailing Год назад

Hey bro! It’s been a while since I’ve done this. I’d say between 3-$6 per square foot

@AtomicPapaya 4 месяца назад

10:51 “IF YOUR GELCOAT” Haha can you imagine hitting gelcoat with that

@DrakesDetailing 4 месяца назад

Yeah it would be kinda rough haha

@alexdimbel 10 месяцев назад

What should i do if i have some teaks that are not “glued” to the fiberglass? Any experience?

@DrakesDetailing 10 месяцев назад

Hey bro! Haven’t personally encountered that. I would assume that means it’s rotten

@BG-yr4xs 3 года назад

Hey man love the videos!! I’m new to the boat detailing world and I wanna know what you think about paying for training? There’s a couple of classes you can take here in Jacksonville, Fl that are hands on 2-3 days. Do you think its worth the $500-900? Or should I watch as many “how to” videos on RU-vid as I can take notes and go from there? Thanks!

@DrakesDetailing 3 года назад

Thanks for watching! Having good hands on training is by far the better option, but with that said I don't know of many good training classes out there. I will usually do 1 or 2 classes a year, I will keep you posted on my next one. Follow me on instagram @Drakes.Detailing

@shaynegriffiths3396 3 года назад

Can that sander be use on gelcoat

@DrakesDetailing 3 года назад

yes

@dimitarpavlov3955 Год назад

Can I apply teak sealer shortly after I have applied oil? Oil appears to be poisonous to pets and now I am thinking of sealing it. Thanks

@DrakesDetailing Год назад

I don’t apply sealer, just re-oil 😎

@SCARTHYBOY692 2 года назад

Got a project to do, customer has varnished their team deck and put sand in it to make it anti slip. I’m convincing him to bring it back to bare teak and oil it, It looks naff. I’m thinking 60 grit to get the varnish off, re caulk and and with 80’ to get the excess caulk off, then teak oil it to finish? Let me know if you think anything could be done better. EPIC CHANNEL!

@DrakesDetailing 2 года назад

Hey man! Unfortunately I’ve never had the experience with that type of job, sorry :/

@philippbecker2354 3 месяца назад

No oil

@bubbabubbie1 Год назад

Estimate on the teak sanding? Thx

@DrakesDetailing Год назад

There’s a lot of variables that go into quoting teak decks. It’s a buy estimate only kind of thing. I don’t have a specific structure for that. You just need to figure out your cost of materials and go buy an hourly rate.

@diegosboattube6262 2 года назад

Good resoult ...but get yourself a Fain multitool to cut trough the rubber..less hassle!

@DrakesDetailing 2 года назад

Thanks for the tip 😉

@darkskater107 3 года назад

What's your thoughts on Snappy 2 part system?

@DrakesDetailing 3 года назад

It’s good stuff! Do the same way I did in the video

@darkskater107 3 года назад

@@DrakesDetailing Cool. Thats what I normally use since its easily available

@YomamaPVT 2 года назад

How do you make it look like that Chair

@DrakesDetailing 2 года назад

Hey man! I personally haven’t done anything like that so I could not exactly tell you…. but there is a lot tedious sanding and high gloss marine grade varnish involved!

@TeachAManToAngle 2 года назад

I’ve oiled teak accents for forty years and it’s still in great shape with only one full sanding in that time frame. Drake - I’m still not 100% sure why you don’t oil like you would and other wood.

@holdenbaldassi3697 3 года назад

What happened to me was that the boat was so old that i started reaching the end of the caulking and the wood was starting to poke through. Had to hold my sander at an angle alll alon the caulk lines. Poor quoting job on that one haha

@mike_smithbike 3 года назад

Did you re stain it after sanded

@DrakesDetailing 3 года назад

no, naked is the way to go!

@frankmoyer5822 Год назад

I just finished a job, I am not too proud of. All the exterior teak on a 35 ft sailboat. I was to sand and coat all surfaces with six coats of Sikens Cetol. But the boat is on the water in a river. The wind blew 18 to 22 mph almost every day, and every night birds pooped all over the newly coated surfaces. Most of the deck hardware had to be taped off rather than removed (stanchions, cleats, winches etc...) and the teak was heavily grooved. So, I didn't sand enough as it would have made for 1/4" raised areas under each piece of metal. Now I wish I had sanded the he'll out of it anyway.

@DrakesDetailing Год назад

Hey, it happens sometimes! I’m sure it looks great 😎

@jenniferlivermore1593 3 года назад

Why didn't you trim the caulk first? 🤔

@scarecrowghost20 3 года назад

great video. how much should I charge for a job like this ?

@DrakesDetailing 3 года назад

This was $1500

@scarecrowghost20 3 года назад

@@DrakesDetailing great!!! thank you!!!! you're the best 😎

@DrakesDetailing 3 года назад

Thanks bro!

@user-il2cg7pt6q 5 месяцев назад

How would you price a job like this?

@DrakesDetailing 5 месяцев назад

By the sq ft.

@benc1927 Год назад

Well done, but I must say, it looks so much better with an oil finish on it

@DrakesDetailing Год назад

🔥😎

@Burritosarebetterthantacos Год назад

I redid my entire sailboat gelcoat with Drake compound. Ill probably buy a Mirka just because the man said so! Also, Im pretty sure teak has silica so wear a mask homie!

@DrakesDetailing Год назад

Noted 😉

@MassSpectrumInd 2 года назад

Murphy's Oil Soap my instincts tell me to use as maint cleaner

@DrakesDetailing 2 года назад

This works well too!

@qno-oj3py 8 дней назад

Why do you not use a handheld belt sander. Works much faster and much smoother.

@DrakesDetailing 5 дней назад

Because this is the way I do it💯 I don’t really do teak that much

@mitjaamersek1917 Год назад

how about pricing?

@DrakesDetailing Год назад

m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0WN0CQkEljo.html m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oU8yRzaBVkM.html These should help! 😎🔥

@larrywilliams5313 Год назад

1)always wear a respirator when doing teak sanding not a dust mask that shit will ruin your lungs.2)always wear knee pads unless you want to end up half crippled like I am in your old age.3)take a single edge razor blade put your finger in the middle and bend upward a little bit and tape off your index finger and you will knock down your raised caulk like butter.I have done an 85 ft boat -dive platform -and bow deck in 4hours.always finish with 100 grit it will remove all scratches and be slick.anything above that grit could result in liability because it will become real slick.and when I am done I use Teak plus / Teak minus teak cleaner it will not damage your deck at all do use Snappy Teak part 1 or 2 it is the worse product on the market because it eats all of soft wood out and then your sanding again.use Seal Once for a sealer works great is about $70 dollars a gallon compared to Dy-tec at $200 a gallon .And Semco teak sealer does not last that long in the sunlight and you have got to use acid to remove again damage if your wood.you can buy the products on Amazon .after 45 years in the private yacht world you get it right.Tight Lines Capt Larry

@DrakesDetailing Год назад

Larry, Thanks for the tip(s). Been doing fine so far ;)

@chadsulli2525 Год назад

Thank you. Great Info. Protect your knowledge and professional future, get some kneepads..your so going to regret not doing that, I do.

@DrakesDetailing Год назад

Thanks! Hahah yeah, I tend to beat myself up quite a bit 🤣

@Annieswaney Год назад

Sanding the teak scares the heck out of me. I still don’t feel comfortable doing it.

@DrakesDetailing Год назад

It’s not bad at all, give it a try sometime :)

@henryostman5740 Год назад

Let me explain the difference between a boat and a yacht. On a boat, you sand and finish the teak, on a yacht your write the check for the guy who does that. In either case they don't have 'floors', they are called 'decks'.

@DrakesDetailing Год назад

💯

@SoftSemtex Год назад

i have a strong opinion on caulk, but i probably shouldnt share it in a youtube comment^^

@DrakesDetailing Год назад

Cool 💯

@SoftSemtex Год назад

@@DrakesDetailing i didnt think you would ever read that, and now i feel silly v.v the video is helping me restore my sister's balcony tho, even if it's a totally different setting where no caulk is involved :>

@DrakesDetailing Год назад

Sweet! Glad it could help! 💯