How to set timer and settings on a Culligan Medalists water softener

Подписаться 128

Просмотров 1,5 тыс.

50% 1

In this video, we're going to guide you through the simple process of setting the timer on your Culligan Medalist series water softener. We'll also share other useful information that will help you get the most out of this powerful water filtration system.
Please note that while this video is not affiliated with Culligan, it is for educational purposes only. Our goal is to equip you with the knowledge and resources you need to maintain your Culligan Medalist and enjoy clean, filtered water in your home or business.
Join us as we explore the benefits of water softening, reverse osmosis filtration, and other Culligan products that you can use to enhance your drinking water quality. We'll also share some of our favorite DIY projects to help you save time and money in water filtration.
Keep a lookout for the #watersoftener #Medalist #Culligan #water #filtration #reverseosmosissystem #waterfiltration #culligan #drinkingwater #filters #foreducationalpurposes #diy #diyprojects #h2obro and stay connected to get more helpful resources and tips.

Хобби

Опубликовано:

20 дек 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@MrsRRose-qr4xm Месяц назад

Easiest video! Thanks

@TheH2OBro Месяц назад

Glad it helped!

@dfossilo 5 месяцев назад

Thank you. Hopefully this saves me a future service call.

@TheH2OBro 5 месяцев назад

I hope so too!

@deniemarie5010 Месяц назад

I don't have the same model as you, but the settings are the same. Very helpful video. I had to reset time after a power outage. It was helpful to see what each setting is for. I'm saving this video for sure. 👏👏👏👏

@TheH2OBro Месяц назад

Glad it helped

@sarkisgabrielyan1935 4 месяца назад

Thank you for the video. Do you know how I can do a factory reset on the system? I have the Aquasential Select Plus Series Softener and after a power outage it has stopped showing me the CAPG, FLo and GALr options. I'm hoping a full reset of the system will bring the options back.

@TheH2OBro 4 месяца назад

Yes, on the back of the circuit board there will be 10 dip switches. Simply slide them all to the OFF position then back to the ON position and that will do a factory reset. One thing to note is that typically a power outage will only reset the time of the day and not the settings. How this helps and thank you for watching!

@sarkisgabrielyan1935 4 месяца назад

@@TheH2OBro Thank you! I was able to do the steps but am still not seeing the CAPG, FLo and GALr options. Do you happen to know of any other way to get to these functions apart from what you show in your video? Also, I’m looking for an O-Ring replacement for a Seal Pack and Brine Piston and Sleeve Kit. if it is not too much trouble, since your system seems similar to mine, would you happen to have a part number for that or know where I can look to get the O-Rings? Thank you so much for your help!

@TheH2OBro 4 месяца назад

Honestly I am not sure why you can’t see those options. Only thing I can think of is you have an older water softener and it’s set to regenerate by day intervals (tcb) and not by gallons used. As far as the seal pack, I don’t believe there is replacement o rings available only. You have to replace the whole seal pack and brine piston assembly as a kit. You might be ok with just servicing the seal pack. Here is a link to one of my videos on how to service it. Hope this helps! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--KZaz49ihMs.htmlsi=dLZXBS2F-zivNabd

@sarkisgabrielyan1935 3 месяца назад

@@TheH2OBro Thank you again for your help! Do you know if all models use the same seal pack? If yes, do you possibly know the part number for your seal pack and where I can purchase one?

@TheH2OBro 3 месяца назад

If your cam and Motor assembly look exactly like the one in the video then yes they all use the same seal pack. Part # 01016267