How to Set Up & Support Your 3D Printed Dice

Подписаться 202 тыс.

Просмотров 136 тыс.

50% 1

Struggling to get quality 3D prints on your Dice Masters? Let's fix that.
This video was sponsored by My Mini Factory.
Here is a link to the written version of this video on the My Mini Factory Blog:
www.myminifactory.com/blog/se...
Here is a link to The Blue Mimic's MMF page:
www.myminifactory.com/users/T...
Here is a link to to The Blue Mimic's MMF dice STL's:
www.myminifactory.com/object/...
Check out ImagiNation Labs with Rev Chumley on RU-vid! Huge thanks to him for the connected fin/line supports idea. (With our powers combined, we will rule the universe!): • 3D Resin Printing Mast...
Here is a download link to my free dice (now with pre-supports!): www.dropbox.com/sh/ymqlmpzp6k...
Support the channel and earn some amazing perks on Patreon! / rybonator
Join the Dice Goblin Discord! / discord
If you like twitter, I got one! / rybonator1
I also have an Instagram! / dm_rybonator
If you want to mail me something, here is my Private Mailbox Address, so you can send me stuff to look at. I can't promise that I'll review them, but I'd love to see what you make! (Or just tweet me pictures if you make something, that's nice too!)
11010 Lake Grove Blvd,
Ste 100 #479
Morrisville, NC 27560
If you have any ideas for what you would like to see built/reviewed in the future, let me know in the comments down below! Then subscribe so you don't miss any new videos coming out in the future! Also, if you liked this, gimme that sweet sweet like.
MUSIC:
"Summer Groove" by Rogue
• "Summer Groove" Future...

Хобби

Опубликовано:

20 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 388

@UriskOfTheFae 13 часов назад

I can't believe it's been 3 1/2 years. I can't imagine how long I've been watching this channel, then. Finally came back to this after years of barely starting to cast resin dice. Had my Mars 2 Pro printing minis for about half a year, and that desire to make my own math click clacks is biting again. With all the knowledge from minis, I definitely wanted to look up how folks handle printing dice masters (particularly on older 50micron printers). The warping do be a real concern. Finally, it be time for me to make the custom dice set for my D&D group's long running dungeon master. Custom faces & all. Thank you for years of awesome videos, Rybonator.

@Rybonator 13 часов назад

@@UriskOfTheFae been a long and wild ride! Thanks for sticking around! You're gonna be the bestest adventurer/friend if you make everyone dice! You rock :)

@franciscoalonso1493 Год назад

Hi, maybe it has been pointed out already: From my experience I solved the inhibition problen (Anycubic grey resin, just in case): - Curing under UV Light for approx 30 min - Soaked in Isopropyl alcohol for 1 hour approx - Sanded off every face and soaked again on alcohol for another hour After that I could use those 3D printed dice masters right away to make the silicone molds. Hope it helps anyone without spending a lot on Inhibit-X or other products, specially for people who is not making a ton of dice.

@ImagiNationLabswithRevChumley 3 года назад

Thanks for the shout out @Rybonator Glad my method helped out. Always glad when we can get the word out on how to make printing dice a bit less frustrating. I'm probably to blame for the whole "leave them out for a couple weeks" thing from my surprise on testing inhibit x alternatives. I'll be curious to find out if it works in your experiment.

@Rybonator 3 года назад

Rev, you are the absolute man! You were the missing link 100%, and your vids are so soothing to watch. Quality stuff my friend :) Hey, if you fixed 2 problems, that just makes you that much smarter! I'll report back after a few weeks/months.

@sev705 3 года назад

I find my best results are just letting them air for a week. I know there was another method floating around where you cure normally and then do a second cure in water that lets you mold in a day or two but I haven't tried it yet.

@LadyLindsaysCreations 3 года назад

@@Rybonator After 6 months, what was the turn out? Lol, if I can save $50, I'm more than happy to wait.

@mrjinglesdice6745 3 года назад

@@LadyLindsaysCreations I've done both the wait a week and over curing. I've yet had silicone fail in me. Both DG 20 AND SC 37

@nourson54 2 года назад

I found once a 'scientific' document on plat. silicon inhibition and SLA resins. The conclusion was that using a UV cure of ~15 min + 4h in a 120°C oven suppress inhibition for almost all resins . I had to find it again and post the link

@chiaracarolinaalbergante8989 3 года назад

In these days I was going crazy on how to put supports, and here comes Rybo to save me!

@Rybonator 3 года назад

Perfect timing! I did it for you:)

@HungryHungryArtist12 3 года назад

Finding your channel got me super hyped to make my own dice. So using my 3D experience I'm making my own custom shaped dice, but ran into this exact issue when printing. So thank you for this! Keep up the great work!

@Rybonator 3 года назад

Awesome! Super glad I could help :) I racked my brain for a solution for ages and this seemed to work for me so hope it does for you!

@BaramuLord Год назад

I usually use your vids as podcasts, I really like your content and appreciate the time and effort to make the pre-supported file for everyone.

@lwolfstar7618 3 года назад

What a supportive video to lift up other makers *chef kiss* I wish you'd made this a few months ago but it'll definitely help a whole bunch of folks

@40ounces 3 года назад

you’re awesome for putting up those files for free! they’re the first thing I’m gonna try printing when I get my 3d printer

@nicklasandersen7785 2 года назад

Old but gold, thank you for the STL's!

@EiggyRules Год назад

I printed the dice from your description and they all came out wonderfully! Then using the method I was able to print up my own customs and they came out just as well, excellent work and tutorial!

@Marcario 3 года назад

My dice from the files that you shared have just finished printing and they turned out absolutely perfect! Thank you so much, I'm a complete beginner and this made everything very easy to understand.

@crowsarewatching540 3 года назад

One of the highlights of my weekend is always the weekly Rybo video

@Rybonator 3 года назад

That's so wholesome :) You rock Fireside! You made my morning!

@Beastly477 2 года назад

Definitely took me longer than I'm willing to admit to support my dice in Chitubox, but man this guide is a lifesaver! Thank you very much!

@WitchOpheliaa 3 года назад

I absolutely love rhombic shaped dice!! Definitely going to get some shapes like this for my next set of masters! Can't wait to see the result of the experiment you are going to make with the cure inhibition!

@Rybonator 3 года назад

That's awesome! Ya I can't wait either. Hopefully this is an actual solution!

@Socrates458 3 года назад

Thank you for setting up the supports! That is what I have a hard time with for any print. That and making them not fail miserably.

@thedollardm4672 3 года назад

Your tutorials and explanations are invaluable!

@UncleJessy 3 года назад

Heck yes! This is awesome

@Rybonator 3 года назад

No you :) also thank you haha

@indranig2920 3 года назад

I literally got my 3D printer today. You are a MAGICIAN.

@Rybonator 3 года назад

Boom! Perfect timing 🙂

@nicholasbira2817 3 года назад

This was the video I've been waiting for. I agree, this was the missing link in your educational content. Improving my dice now!

@fyrhtu81 3 года назад

"We can always take material away but we definitely can't add it back." Uh - UV resin. Very fine eyedropper, UV flashlight. Boom. Now you too can add ugly hunks of material back to fill divots that you can then sand back down to the proper level!

@CoolTrainerJulio 3 года назад

Yep I do this all time when I accidentally take chunk out of a mini due to and support placement. Just drop a bit of resin, cure it with the flashlight, sand a bit. Good to go!

@cosmicbrambleclawv2 3 года назад

"Gonna need some support" says the man who claims he ran out of 3d printing puns :P

@_JohnC_ 3 года назад

That ImagiNation Labs video was a life saver when I found it awhile ago, I was wasting so much resin trying to get a good master of my dice. I just wish there was a way to automate supports like this I'm also glad you're doing the inhibition test, I've been wanting to try that myself but just haven't had the time

@Rybonator 3 года назад

Oh for sure! But hey, a 20 minute support session, and you are good to go! :)

@Rybonator 3 года назад

And yeah I am hoping that the test works out alright. It would be nice to not have to rely on inhibit x :)

@jeffrogers8810 3 года назад

Do we know if the "wait for it" method is going to work? I'm about to start my journey into dice making. I'm getting a pressure pot and Dragonskin for x_mas this year sooooo excited!

@sanakanful 3 года назад

Thank you for this tutorial. I was just printing my own custom designed dice and was wondering why the corners showed those exact issues you describe. Just tonight while waking from sleeping I thought to myself that I need to improve the supports, but I had no idea how. Now I have a really good starting point for my next tests.

@willianmarianogajardoni4982 3 года назад

I always assumed the 3d dice would come out ready to go. Great to know more kkkkk

@Rybonator 3 года назад

Ya I totally did too but glad I found a solution that works!

@willianmarianogajardoni4982 3 года назад

@@Rybonator Right ? It must have taken some patience. Thanks for sharing it with us.

@madisonwuertz2349 3 года назад

As someone who’s about to get a 3D printer this is gonna help me tons thank you! Looking forward to seeing how the test works as I would love to make resin masters for dice myself!

@Rybonator 3 года назад

Beautiful timing! Best of luck in your making! :)

@nourson54 2 года назад

Thanks for the video and dice files! For those who want to print it , be aware it's a 14mm d6 based set.

@resonatewithrae4413 2 года назад

Thank you for making this available!! I'm going to use it to make amd sell molds I'll make sure to add your channel and original designer in my description!!!

@joshuashaw5524 3 года назад

Thanks for this. It's helping me print my dice with out as many failures and find where to troubleshoot my printer.

@mustbewilson 3 года назад

Man I wish this came out like a month ago! In my experience after like 10-15 failed sets... Haha I probably experienced all of the above. Good work man!

@EspressoMoon 3 года назад

Thanks so much for this! I have had similar results to yours, and am eager to try supporting with your method. Unfortunately it's a little cold for me to be working in a ventilated area now, so I'll probably have to wait until spring. Hopefully your video about trying the silicone molding without inhibit x will be out by then! Cheers!

@MadShamanLodur 3 года назад

My guy! thank you for this video. I've been doing some dice and have been struggling with the dropping and I had not considered the fin method. Thank you!

@Rybonator 3 года назад

Of course my guy! Glad to help :)

@soshartje 5 месяцев назад

I've been trying this method and my dice turn out almost good this way. My only problem is that the half of the dice that have the supports gets print elongated and I have no idea why? the part of the dice that faces the vat and is not attached to the supports comes out perfect.

@BaneWilliams 3 года назад

Great shoutout for Ameralabs resin, which is one of the best price - performance resins I've ever stumbled across. Its low viscosity makes fine detail really come out with it, and I have less overall failures due to it.

@Necroxin 3 года назад

You upload this on the day I plan on calibrating my Sonic Mini 4K for prints! That's some crazy timing! 😉

@Rybonator 3 года назад

I did it for you! :)

@daedelus_ 3 года назад

Perfect timing! Wanted to make my own dice for a long time, since I don't want to use someone elses model to.give away or possibly sell. Recently received my Elegoo Mars, and experienced exactly this. Thanks!

@darkmojojojo 2 года назад

This is exactly what I was looking for. Thanks a bunch 😊

@stellgodemperor6033 3 года назад

You need more puns 7 isn't enough

@Rybonator 3 года назад

I'm sorry I failed you, maybe I can print some more out sometime? ;)

@QuiniansBudgetCrafts 3 года назад

ah thanks man! Been printing dice lately, this was a big help.

@tympestbooks1727 3 года назад

Very useful and much appreciated video!

3 года назад

Started my channel this week, I’m your fan, Thx for teach us!

@Lavadog11 3 года назад

I would also recommend looking at any of your prints layer by layer to make sure that nothing is going to start printing in thin air as that will cause defects in the dice that might not be able to get sanded out. I would also use a soft toothbrush to clean the numbers out and rinse it in the alcohol a few times. You don't need new alcohol each time I use dunk it back in the same stuff. I also let all the alcohol dry off completely before throwing them in my UV curing box. That way I don't get any of that shiny resin stuff in the pits of my numbers. Other than that great video!

@Rybonator 3 года назад

Oh absolutely! There are many minor steps to improve things you can do :) These are just the basics. Though I don't worry about shiny resin on dice, since we have to sand all sides anyway!

@Luthienne 3 года назад

Just wanted to leave a mark and say thank you for making the video and making the designs available, that is mightily awesome of you! Showing support with a subscription and a thumbs up. PS Also, really appreciate your pun game :D

@janetmiller1097 3 года назад

Ohhhh my gosh!!! I need a 3D printer you have helped me learn so much!!! Thank you for your videos!!! It’s really helped me roll with dice making!!

@Rybonator 3 года назад

I'm glad I was able to help Janet! If you get printing, best of luck to you! :)

@The_McFortner 3 года назад

1:52 "...[T]ired of the randomness in that." Heh, I see what you did there.

@tommyfoley 3 года назад

Try Smooth-On Mold-Max XLS II. It's tin cure silicone but doesn't shrink, has great detail, very flexible, and most importantly cures with 3D printed masters. Right out of the printer. No waiting months. I've had good success. You just need a vacuum chamber and a gram scale.

@Rybonator 3 года назад

That's good to know! I always heard that tin cured molds are far less durable. But I might have to just give yours a shot! :)

@tommyfoley 3 года назад

Rybonator I was worried about durability too. Haven't had any problems though. It's a little thicker than platinum based. To avoid bubbles, you might have to prep your numbers, like keycap people do to their small deep indented shapes of their masters. If you have questions, contact me at my IG: dojo_do_tofo. P.S. keep up the great work. I love your channel.

@WonHaungLo Год назад

This is a great explanation of how I need to do this

@shadowlaughers101 3 года назад

I will say, u got me into dice making and I already had a Mars Pro. I've been printing and polishing the resin die with the Zona paper, and paint in the letters. And as long as u let the dice FULLY cure, I havent had any scratching on the dice at all. Translucent resin seems to cure much harder than grey or opaque resin does. So if anyone doesn't want to mold them and just have them for personal use, just polishing the printer dice works great as long as they are cured

@Rybonator 3 года назад

Good to know! I'll be doing some durability tests on resin next month, so maybe we can bring proof to that! :)

@RoseKindred 3 года назад

This was interesting, thank you. I am modeling up some dice with custom sides and wanted to make a few for myself instead of having a company print 1000 before realising something might need a change.

@Mhworley 3 года назад

At last!! This is GREAT. Printed up a set already. Can you post your files with supports on the islands? THANKS!!!

@silverdragon1314 3 года назад

I can't tell you how excited this makes me, I was having troubles and I thought it was my printer being messed up dispite some good rest runs on minis. Hopefully this and one other change will fix my problems I'd run and do it now, but I'm with family for another week and obviously didn't lug my printer with me. T.T

@WhiteRaven___ 3 года назад

Dude... I can not thank you enough for this. I have an elegoo mars and gave up trying to print my own dice masters cause of those issues lol

@WhiteRaven___ 3 года назад

I'm gonna give it another go now lol

@Rybonator 3 года назад

Hopefully this is the fix you needed my friend! Best of luck in round 2! :)

@armLocalhost 3 года назад

7:42 you can also ADD material. Get a syringe, wrap in something UV blocking (like aluminum foil), suck the resin you're printing with into the syringe and the carefully put the resin where you want it and cure under the sun or UV light and sand it to shape it. That's how you can fill holes, fix corners and just glue stuff together like regular epoxy.

@semipessimistic 3 года назад

I needed this so many

@SummerNeverEndsDep 3 года назад

great video! thanks for the advice

@DeathTempler 7 месяцев назад

For anyone struggling to get the supports straight, go to the "Middle" tab, set "Angle" to .02 Specifically, the first "Angle" value, do not confuse with one on bottom of page.

@mandyvantveer6362 3 года назад

I was always wondering how to do that. Thanks for the vid! ^o^

@Rybonator 3 года назад

Thanks for watching! :)

@miricoleciona 3 года назад

Hey Rybonator, i've been binging your videos on your channel here and i was wondering if the experiment you did on the dice worked. did waiting several weeks help with the silicone curing problem?? thanks for all your incredible videos

@kylesanson6791 3 года назад

Oh my god thank you for this. I'd tried all different kinds of supports on the set you put out, and always had drooping issues. Can't wait to run a print of these with the new supports later.

@Rybonator 3 года назад

Perfect! Glad we have a solution out there for you now :)

@chibster9124 3 года назад

Thank you so much for uploading presupported models for your dice. I have been having so many problems with them! I noticed you didn't put supports on some of the islands or overhangs so I added my own when I went to print them, just in case.

@xavierfaraudo 3 года назад

Supporting on edges is way to go, definitely! I do it slightly differently (and slightly better, IMHO :D). I use OpenSCAD to generate the models, with a module to add some "walls" that are either strictly tangent or slightly ovelapping on the edge. The parametric nature of OpenSCAD allows to easily make those walls go all the wall or just some part (useful if you're doing chamfered, beveled, rounded, etc. dice). I can also add those "supports" on top, to compensate any distortion by shrinking/ different tension / slightly off results. That's far less work than adding all those gazillion supports, and with perfect orientation /alignment. I did also some dice that can only be 3D printed, AFAIK, as they're hollow on the inside (with draining tubes going to the vertices); I call them "dicenamic". You can void the inside with the dual of the polyhedron, the rectified polyhedron, the same shape, etc., and the balance won't be affected, but they roll like crazy. It's still a work in progress, but if you're interested I can send you files. Cannot imagine anyone better for honest review and insight!

@blackaccordlx 3 года назад

Great video man! Not sure about the resin youre using but with elegoo resin, 2 weeks wait time was all i needed.

@Melos 3 года назад

The puns! Besides the awesome content, I love your puns!

@Rybonator 3 года назад

The puns ARE the content. Everything else is just an excuse for more puns ;)

@beefgnawpolisproductions2105 3 года назад

Holy crap, thank you. I'm working on my first set of masters right now and tearing my hair out over mushy corners and streaky numbers. Sometimes I have decent luck fixing small divots by dabbing in the smallest possible amount of UV resin to fill the dip with a toothpick, laying a bit of clear plexiglass on top to squash it flat, and shoving the whole thing under the UV lamp to cure. The plexiglass will pop off once the resin is cured and if all goes well, you can sand and polish and it'll be fine. Sometimes it doesn't work and it definitely works better on faces than edges, but it's worth a try before you toss and reprint at least.

@beefgnawpolisproductions2105 3 года назад

Update: I started the Photon going on a batch of dice before I left for work and came home to what sure as hell look like perfect dice. Won't know for sure until I sand them a little, but I saw no mushy corners or obvious streaky numbers or any of the issues that have plagued me from day one. You're a lifesaver, man.

@bipolarchemist 3 года назад

I can confirm that time will heal all that ails you with casting #D resin printed dice in platinum based silicone. I have 5 positive test now for 3D printed objects that are more than 1 month old. Sadly, my EPAX X10 is having sight issues so my experimentation has been slightly halted, but the dice I printer this summer had no issues in the mold housing I printed sometime in September or October. Hard to keep track of time these days, but if you are patient than Inhibit X is unnecessary. And the connected fin method if definitely a more consistent way to get those dice printed without issues. Now if only I could up my Blender skills to produce the supports there as a nice solid plate, my life would be slightly better.

@SlytherinReviews 3 года назад

awesome video

@damondestructo 3 года назад

Dice polishing: there are kids pottery wheels. I have one with a 4” plate. I use 4” beveled mirrors with zona squares taped to the top. You can then tape, clip, or use those sticky gel pads, to attach the mirror to the spinning plate. Then when you need to change grit, just swap the mirror.

@goatelope7539 Год назад

Love the videos

@CptWashu 2 года назад

@Rybonator. Thanks for the files it was the first thing I printed on my new 3d printer. :)

@sarini6626 3 года назад

This was so helpful, thank you!! Quick question: how do you clean up the number engravings?

@RPGPlanet 3 года назад

Hi, I really loved your video. I would like to know which font you used. I will change the D8 and I don't know the name of the source; o) If you can answer me it will be awesome!

@RIVERSRPGChannel 3 года назад

Nice informative video

@evilkoolade 3 года назад

Waiting eagerly to find out if waiting will fix the silicone issue

@sijtze1996 2 года назад

Inhibit X is basically just light naptha, which means you could probably also just use the cheaper low boiling point petroleum ether or maybe even turpentine. Haven’t tested it myself yet, but I probably will soon since I’m planning on making some masters. In theory both possible alternatives would be able to basically remove any chemicals that would inhibit the curing of the silicone from the surface of the dice, but we’ll see :p

@Victorious_Reads 3 года назад

Can confirm, letting your dice sit for a week or two fixed the cure inhibition issues. A week was enough for me.

@Rybonator 3 года назад

Beautiful! Now the experiment will also help to see if it needs to be sanded before or after we wait :)

@kirstenv-g4459 3 года назад

Yes thank you!!

@ethanpercival216 3 года назад

Thank you. So, so much.

@VladFTA. 3 года назад

Thank you so much!

@Traylor0 3 года назад

After watching your first video, It seemed difficult to order inhibit X so I lightly sprayed my masters with clear spray paint and they seemed to mold fine. Also you can correct a master with a chipped corner by dotting 3d printer resin on it and putting it back under your curing lamp for a few minutes.

@Rybonator 3 года назад

That's a great tip! I should definitely give that a shot if my corners go wonky sometime :)

@AgenderFordMustang45 3 года назад

I LOVE d4s that are 4 sides with ends and not a caltrop. The only makers I know of that do d4s that way is crystal caste and NOW The Blue Mimic!

@Geeksiders 3 года назад

Dumb question. How do you get your supports straight in Chitubox? Mine come in at an angle and it causes curves along my edges.

@Ch33sePot4to 3 года назад

Love your videos! I was just wondering what printer settings you use to get your dice goblin to print so perfectly on your d20s. I'm trying to print my own logo but I can not, for the life of me, find an exposure setting that gets the detail!

@corchonga 11 месяцев назад

Thanks for this tutorial!!! Do you have any suggestions on printing jumbo dice?

@Ghostplantgames 3 года назад

This doesn't really apply to this video specifically but could you use a tube of construction silicon to make dice molds? And which type would work best? (Window and door, bath and kitchen etc)

@hayleydickey2321 3 года назад

It took a while for me to get a full set of usable masters. I finally get to make my silicone molds going tomorrow (super excited). Unfortunately I'm have trouble 3d printing now that colder weathers setting in. Do you have any suggestions on insulating or keeping 3d printers warmer?

@KGillis 3 года назад

I didn’t have inhibitX, and had sanded and let sit my resin dice for a few days. I then used platinum based silicone, and had zero issues. So, you may not need to wait more than a few days

@Rybonator 3 года назад

I tried it at a week once and had issues, but I'm sure there are a few factors in how long you gotta wait :)

@KGillis 3 года назад

@@Rybonator I think another factor was that I sanded it down to a near glass shine with zona paper as well before letting sit for a week. But, it may also vary a bit depending on what specific tin cure you're using. I use Dragon Skin 20.

@bubblemum 3 года назад

I was wondering-is there some way to make resin foam up to look like a pile of bubbles, or of whipped cream, and be able to keep the fluffy look of it, even when hardened?

@corentin777 6 месяцев назад

Dude ty sooo muchhh

@otterannihilation3655 3 года назад

Thank you SO SO SO MUCH for making this available to us!!! It has helped me out immensely. There's just one tiny thing about the Rybonator set that bothers me... I printed it out and the supports worked beautifully, but the 2 on the d6 is not centered. It's more to the left of center. Is there any way I can fix that on my end in the slicer or another program? Thank you!

@eemikun 2 года назад

It's possible to import the stl file into Blender and fiddle with the models.

@pareskyjustin 3 года назад

Would you make a sprue mold or a cap mold with these? I ask because I'm trying to figure out the best place to attach the sprue on the d10/d100. The points are so sharp but I'm afraid if I put it on the side, the sharp points will tear the silicone as I'm demolding.

@Ulric_PenDo 2 года назад

So, was there a follow up video in the 2 resin dices left out to see if they'd cure in the silicone without any sprays?

@QuixoticChaotic 3 года назад

So, would it be possible to increase the outer strength of 3d printed dice with some sort of spray sealant that you could sand to keep it uniform?

@Chronogami007 3 года назад

Love your videos, thanks for them! How do you get the supports to add in fully vertical? I get the connections at angles, and have to try an move the tower to keep it vertical. super time consuming. thanks!

@cameronfrost3225 3 года назад

Me too! Have you had any breakthroughs with this issue since your comment? @Rybonator what's your secret to getting them all vertical straight off the bat?

@bug5654 3 года назад

Find channel & first thought: Is this the CGP Grey of dice making? Verdict: Well technically no...but yes. Good stuff!

@squirrelsrus1 3 года назад

Ordered and downloaded. Thanks. TBH, I bought them because they were pre-supported! lol

@grayfaux_ 3 года назад

You can use a traditional uv resin to fill pits and holes. I've done it then you can sand your master smooth.

@makewithmegma 3 года назад

Cool👌👍

@Rybonator 3 года назад

No u

@makewithmegma 3 года назад

@@Rybonator 👍

@benjamingrnvold9081 3 года назад

Man, I love these dice. What font are you using? I'd love to make my own shapes, but fell inlove with this font.

@MayMcDonough 3 года назад

I'm not sure I caught the results of the comparison. When you left out the dice, how long did you leave the out before sanding? and did it work? did you not need exhibit x?

@snailorgy 3 года назад

@Rybonator really need a video on how you 3d model those masters of yours. especially when it comes to custom sides for the 20 ect. also did I miss the give away of the printer you mentioned in the mass mini printing video or havent you done it yet?

@embergeos 3 года назад

Thanks to your videos I’m getting into dice making this winter! I was actually just looking for good dice masters, and most online are expensive, so thanks for reminding me you have a free set! Do you think that an FDM 3D printer would work for things like this or is the small layer size of the SLA necessary?

@Rybonator 3 года назад

So an FDM MIGHT work, but you'd have a lot of thick layers, and possible gaps, and need to sand a ton away. I would recommend getting a resin set printed, but hey, necessity breeds invention :)