How to Set Up your Bike on the Conquer Cycling Trainer 

We tackled assembling the bike as a family project. ru-vid.comUgkxzg0clhbtRf2gGxPkVETFKJJKGqdsorQu The package is heavy, but I have 2 teen boys that were able to move it. The written instructions were great- we didn't need to watch the videos, but it was good knowing that the option was there if we needed it. After we were able to get it set up, the boys each rode 3 miles and I rode 8 and the bike stayed quiet. The display is easy to reset, and you can put it on whichever setting you are using (time, distance, calories, etc). I will say that my butt is a little sore from the seat, but that could be because I haven't rode in a while. While it is comfortable for me, it was not comfortable with the seat position for my friend (could not move the seat back far enough and he slightly looked like a kid riding a tricycle that he had outgrown). He also said that the seat hurt his manly parts. We are going to look for a different seat that will be compatible with this bike for him.I did purchase the Wahoo Cadence sensor and strapped it to the crank of one of the pedals. This will sync with my Apple Watch, iPhone and will import data in to my Health app. Wahoo does have other sensors available other than cadence. I can also keep either my phone or my iPad on the display and they both feel pretty secure.

I'm so glad I watched your video. Thank You for showing us how to install our bikes on the trainer with out talking out legs off.

Super helpful after I lost my instructions!

Thanks so much this is just the instructions I needed.

Thank you. I have another brand that came with poor instructions. Your explanation was great and I'm ready to ride inside!

Great to use for the winter if you can’t get out on the road!

Awesome demo, thanks?👍🏽

Thank you. So helpful

THANK YOU TREMENDOUSLY!!!

My original axle is thicker that that which comes with the trainer, so my wheel is not on right. Is there a thicker conquer skewer that would snugly fit the hole on my hub or a converter I could get? I'd appreciate the input if anyone else had a similar problem.

i just bought a used mag bike trainer but it came with no trainer skewer i could prb buy one but still am wondering how it goes on and there not many videos on it and my 29in mountain bike tires are too tall for it and my muntain is a 900 dollar GT mountan bike 29 speed and idk how to just replace the back wheel smaller and if i change my tire what size would i need cuz its a special tire cuz it has discs and gear attached i believe so idk how easy itd be just to replace the tires will keeping my gears so i can still have the resitance bike please helppp

Hi there ive back a wooden stand but got no resistance what do i do thankyou for your video thou from uk

works great. i bought a basic mtn bike from wal mart just for it. i use my nice bike for around town still. if ur bike doesent have quik release on it. just go down to wal mart or something buy a cheap bike just for the trainer. pretty much all schwinn mtn bikes have quik release if u need a brand. i havent seen a adult schwinn which didnt.

does it output the speed? and how do we change the resistance. how do we get the speed and give resistance values to this trainer?

Can this be used for single speed or fix gear?

can you do maintenance work with this stand like free tire rolling...so basically I want to use it for winter workout indoor and then also for maitenance work on the bike...new biker here lol

FANTASTIC

A combination of the rear adjustment to the tire and the acceleration producing torque on the magnetic coil creates greater resistance, hence going through your gears with as much acceleration as you can will increase resistance.

What if my bike doesn’t come with quick release?

How do you get the rod out to put the conquer skewer in? I can't find anywhere to help me take out the rod, but everywhere show how to put the skewer in... that bit's easy... :(

Is there any trainer that does not need to take out any parts of the bike?

Very good thanks a lot.

Can you use this with zwift?

I have a fixed nut bike and I purchased new cups that are made for fixed but bikes. When my bike is the the trainer my bike feels like it leans slightly to the left. Is that a normal thing? My trainer seems level. Can’t figure out why I’m leaning.

is there an adapter for kid bikes (16") without these quick-release levers?

Why do I need to change the skewer? My existing one fits the stand nicely. Is there any other reason than the fit?

Hey, is this compatible with a 27.5" ? I have a Specialized Pitch.

I have the newer brand type of road bike so i have a different looking quick release will it still be compatible with the old quick release

What if my bike dont have a skewer on the rear wheel . Is there a way i can still use the bike trainer?

How can i find a bike stand just like that and thank U so much for it can be used during the winter at home bye DONALD France Bordeaux.

When using this trainer how do you record your workout activity?

Where can I buy a new skewer? Or is there one available today that is compatible??

Does anyone know if you can use this with a foldable bike? Thanks

Can I leave your quick release valve on my bike when I want to go ride outside or do I have to put my factory quick release back on?

So what is the "proper pressure on the back wheel"? How tight do I crank the mag down?

Do I remove my rear axle and replace with your quick release? My bike doesn't have a quick release.

Can this trainer be used on bikes that do not have a quick release?

How do I disassemble it? Please help.

My gear cable fell out of the stand. How do I put it back on?

merci

i aint got no gears on my bike. how to set this up?

I need a new quick release where can I find it?

"The cone pointing outward"? Could be misconstrued easily. Try "with the pointed end of the cone facing the hub" or some such.

Will this work with a mountain bike?

will this work with a ribbed tire rather than a road tire

Why can't I ride standing on mine? Do I need to put more pressure on the back tire with the mag roller?

My outside turning handles appear locked/jammed in place. Should I take a hammer to them or simply return device ?

My skewer seems too long and is sticking out on the right causing a fit that doesn't seem safe or snug enough.

Please tell me a price of cycle stand & your address

Might be a dumb question but Im new to this, could I use one of these with my mountain bike?

How can I get a replacement skewer?

Perhaps switch camera angles so we can see the other side of the wheel? No matter, I'll just go to another video.

Why does no one ever explain how much pressure the roller should have on the rear wheel?

You broke my chain

Looking to purchase this but will it work with this bike www.specialized.com/us/en/bikes/fitness/crosstrail-disc/106407 Specialized cross trail bike

Does this fold away for storage?

can this work with mountain bikes???

Will it fit my Penny Farthing?

Wau gut man

How to connect to zwift

Can I use this on a three speed bike (no skewer)?

What is the brand of your bike trainer

How much ? You have ship việt nam ?

This is. A hawker u said?

can't see anything

I bought this off of Amazon and my Schwinn Ranger 2.6 FS bike doesn't have a skewer on the rear tire. Is there any other way to install it?

will it work with 24"?

Mine has a high pitch whine when spinning, is that normal?

There isn't any resistance. What am I doing wrong?

You exactly didnt show what I needed. I cant get my non-drive side skewer to fit into the fixture with 2 curved cutouts. You didnt show this.

How loud is it? I'd like more footage of just the fan while someone's riding it. +Micahel Triana - open your eyes

Mai name is cj

Where is part 1? .....

Misleading title. Mine came in the box unassembled, and no instructions on how to attach the mag resister or any other parts to the orange frame/stand. Your title made it appear this was going to include "assembly" instructions. I only see "setup" instructions in your video.

It's quite loud

When I set mine up I soon realised that my bike computer wouldn't work as the front wheel stays stationary. 🚲🤣🤣

I can't see anything when mounting the wheel... Someone should have moved the camera to record every step on all angles... When making tutorials, please make them so that absolute noobs like me understand exactly every step of the procedure. We have not a technical mindset like you. 😅

The camera angles in the vid are a complete joke.

There so expensive 😭

Seems too complicated

Can't see what your doing properly, closer more detailed recording needed more explanation, I've just bought one of these with no instructions and I've never had one before or know anything about them so your video didn't help sorry

I bought instructions from WoodPrix and I builded it very very cheap.

"Adjust your Mag Resistor".... yep, I can see *everything* you're doing there, buddy.... :/

As is usual with guys. They have no clue how to explain anything clearly. Apart from that he has the video placed so that you cannot see what he is doing. If he didn't have someone to assist him. He shouldn't have bothered.

Your video is awful. Try zooming in so people can see what you're doing