Тёмный

How To Setup a Roll Race Bike and 200MPH Speedo Coding Unlock, 2023 BMW S1000RR 

BT Moto - Motorcycle Research and Development
Подписаться 1,3 млн
Просмотров 17 тыс.
50% 1

Want to know how to setup your bike for roll racing? BT Moto shares a mild setup and how to get your bike faster without adding any power, with our 2023 BMW S1000RR.
BONUS: Check the end of this video for how to code your speedo to display over 200MPH
Parts Used on This 2023 BMW S1000RR:
- BT Moto ECU Flash Tuning and Basic Bolt-ons (Motor is 100% Stock)
- BT Moto 1" Lowering Kit
- BT Moto Front Strap Kit
- BT Moto Wing Delete Kit
- BT Moto Mirror Delete Kit
- BMW S1000XR M Endurance Chain
- Dunlop Q5 Rear Tire (200/55/17)
- JT Sprockets 44 Tooth Rear Sprocket
Special thanks to Lee's Cycle in San Diego. They're also a dealer for BT Moto.
####################
CHAPTERS IN THIS VIDEO
####################
0:00 - Introduction to Roll Racing
03:06 - Baseline Speed and 60-130MPH
04:09 - 42 Tooth Speed and 60-130MPH
05:30 - Install New Tire and 44 Tooth with More Wheelbase
12:17 - Final Testing Speed and 60-130MPH
14:25 - Testing Against Other Bikes with ‪@imKay‬
18:10 - Final Overview
18:58 - Unlock 200+MPH on Your Dash
To purchase tuning or parts, go to www.BT-Moto.com

Авто/Мото

Опубликовано:

 

7 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 64   
@Naldo_S1K
@Naldo_S1K 15 дней назад
Now this is how you start your Saturday! 🏁🏁🏁
@stfu6397
@stfu6397 15 дней назад
Always such complete, well explained videos, great job.
@citocaraballo7839
@citocaraballo7839 15 дней назад
Great video
@fathertimencUSA
@fathertimencUSA 15 дней назад
I lowered my 2022 S1000RR two inches and didn’t cut anything. I took a heat gun and heated the plastic and pushed it up with the round part of a ratchet enough so it cleared the shock. Very easy to do and does not involve cutting the plastic where there is a hole there.
@saifmohammad4840
@saifmohammad4840 15 дней назад
I really love how stock the bike is❤❤❤.
@jackskrant9419
@jackskrant9419 13 дней назад
Just got my sprocket and chain, going to try this with my FBO 23’ with e85 tune and report back!
@4pegs
@4pegs 12 дней назад
Looking forward to hearing this too man. Wanna get a s1k next year 🤝
@Ken_Myette
@Ken_Myette 15 дней назад
Why would any of the changes you made effect the speedometer? Isn't the speedo sensor located on the front wheel ABS ring
@CubanRider
@CubanRider 15 дней назад
Great content. It'd be interesting to see if a taller 200/60 tire would allow for an extra 1-2 mph improvement to the top speed.
@eazyrydermoto
@eazyrydermoto 14 дней назад
It does 250lbs rider 2021 S1k 200/60 supercorsa doing 205mph gps bt stage 2 sprint filter and stacks
@CrusaderGeneral
@CrusaderGeneral 13 дней назад
Careful out there in Mexico :)
@Supercharged1976
@Supercharged1976 15 дней назад
So what your saying is my 380 lb butt can't be fast? :-( I see this first hand. When a stock Streetfighter with a 180 lb rider is dead even and then kind of pulling me on my 230 hp Z H2. I just sleep at night knowing my BIKE is way faster just not with me on it. LOL!
@skywalkerrider775
@skywalkerrider775 15 дней назад
I am 290lbs and have a ZH2 yes we big guys will never be as fast as a lighter guy but you have to admit the Zh2 moves our lard asses around pretty well!
@theone5902
@theone5902 15 дней назад
Lose some weight and you 2 will be flying
@Supercharged1976
@Supercharged1976 15 дней назад
@@skywalkerrider775 Oh absolutely! LOL!
@johnharris5975
@johnharris5975 9 дней назад
Y’all hilarious
@johnsimms3693
@johnsimms3693 6 дней назад
Im 215 , 5'8 .. think im perfect on my bike ... Sorry im not shaped like a woman 😂
@Scorpio_S1k
@Scorpio_S1k 9 дней назад
Tried this on my 2022 with 17/43 gearing and a 190/55 rear tire.speedo maxed out at 180. Any suggestions?
@paulizulin4926
@paulizulin4926 9 дней назад
Is it working for 2020 s1krr M package ?
@Michigang_S1k
@Michigang_S1k 11 дней назад
Where do you get the Beamer utility tool?
@THEREAL-BOZ
@THEREAL-BOZ 15 дней назад
I went to do this with my 2024 s1000rr and gs 1911 and i found the 1 thru 4 something and 1 thru 4 display speed and it lost me haha any videos with doing this process thru gs1911
@ryzon993
@ryzon993 8 дней назад
1. Is the same value 01 70 on a kmh speedometer? 2. Is it possible to code to use navigation, music and Bluetooth together in Racepro mode? 3. Is it possible to code to deactivate the exhaust flap in the menu and automatically close the flap again when you restart? Thank you for your videos, they are very helpful. ❤❤❤
@eazyrydermoto
@eazyrydermoto 14 дней назад
I’d love to run roadkill against this bike set up for set up and see how they match up it looks like it pulls hard with that 44 t sprocket
@Scorpio_S1k
@Scorpio_S1k 9 дней назад
I ran the 44t on my bike and lost top end compared to my 43t sprocket
@connellramage3303
@connellramage3303 5 дней назад
so if i’m stage 1 bren tune, the bimmer utility coding is not needed? or is it still needed to get over 200 mph? too i’ve seen is 192, not sure if that is the cut off or if that’s really how fast it’s hitting
@connellramage3303
@connellramage3303 5 дней назад
nevermind, kind of getting it now after hearing it needs to be bren flashed as well
@sick_s1k
@sick_s1k 14 дней назад
Does anyone here know how to raise the 186mph speedo to 199 mph on a 2016 bmw s1000rr through the gs-911?
@natecote1971
@natecote1971 15 дней назад
What do you need to do to these bikes to beat a twin turbo lambo huracan? My friend just got his lambo build done and I am ready to drop some cash in this bike to beat him with my 24 s1krr
@BT_Moto
@BT_Moto 15 дней назад
Depends but it’s possible, depending on how much power it has and what speed you race to
@jasonmekush5280
@jasonmekush5280 15 дней назад
why did dropping 4 teeth on the rear net u 0.2 seconds should have slowed accel but add top speed ?
@BT_Moto
@BT_Moto 15 дней назад
Easier to accelerate from 60 with longer gearing
@brandonhollis84
@brandonhollis84 15 дней назад
Yeah. I don't understand that either. Unless he started from 1st gear with the 42. It should be slower because it starts from lower rpm. Unless that gearing eliminates the 2-3 shift from 60-130
@BT_Moto
@BT_Moto 15 дней назад
@@brandonhollis84stock you have to babysit the throttle at a 5k rpm hit. Tire goes straight in the air. Geared longer you just give it 100% throttle and no need to play with the throttle. That along with the slight stretch works wonders
@PapichoNight
@PapichoNight 13 дней назад
theres somethign wrong in the draggy pictures you show 4:05 you said 60-130mph but it shows 100-150mph
@BT_Moto
@BT_Moto 13 дней назад
You’re right. It was a 4.2 60-130 but posted a 4.2 100-150. They were the same time. Editing error on that one. Good catch
@XKV0814
@XKV0814 15 дней назад
lean issues?.just bought your 2 inches lowering kit
@Naldo_S1K
@Naldo_S1K 15 дней назад
I had the 2" kit, but put the 1" kit on after a couple of months. The 2" kit is great for roll racing, but completely changed the dynamics with regards to lean angles.
@BT_Moto
@BT_Moto 15 дней назад
Maximum lean angle will be reduced slightly and the bike will be a little less flickable, but only noticeable if you’re a track guy. If you drop the forks properly (our DIY) video, you’ll be surprised how well the bike feels after lowering.
@Naldo_S1K
@Naldo_S1K 15 дней назад
I should also mention that I have the BT strap kit along with the 1" lowering link. It's honestly the best of both worlds. Strap it down for roll racing, release it for all of your other riding. You also need to still set your wheelie control in your Race Pro menu. That will help tremendously.
@XKV0814
@XKV0814 14 дней назад
@@Naldo_S1K thanks for the inputs..so 1# should be more practical for canyon ridings? @btmoto?thanks
@Naldo_S1K
@Naldo_S1K 14 дней назад
@@XKV0814 yes! 1" drop will work in the twisties!
@kakorasheed5589
@kakorasheed5589 15 дней назад
Good video but you guys forgot K46 (2015-2019) why you guys must make some videos for it
@anotherpeiceofskinonearth5721
@anotherpeiceofskinonearth5721 15 дней назад
will this work on a 2022?
@BT_Moto
@BT_Moto 15 дней назад
Yes
@PapoKingsberry
@PapoKingsberry 15 дней назад
I want to add BT to my 24’ S1K but it’ll void my warranty 🫨
@BT_Moto
@BT_Moto 15 дней назад
Don’t request a raised RPM limiter and there’s no reason to void. We’re making a video with a dealer now and asking them questions directly about voids and denials. Stay tuned.
@austinbraden9752
@austinbraden9752 15 дней назад
Not correlating to this bike but what's the best mods for a 2024 rsv4 1100 base like exhast and tune? Is a small can bad ?
@_ALPHA_619
@_ALPHA_619 14 дней назад
I just don’t get roll racing. Just me I like the track and canyons.
@BT_Moto
@BT_Moto 14 дней назад
We like it all, but understand some have preferences
@ashofficial790
@ashofficial790 15 дней назад
Would never let that garage touch my bike. Impact wrench for sprocket bolts? Gtfoh
@Charger-ob8yl
@Charger-ob8yl 15 дней назад
Just say you don't know how to use quality impact wrenches.
@ashofficial790
@ashofficial790 15 дней назад
@@Charger-ob8yl impact wrenches have no place on a bike you muppet.
@Naldo_S1K
@Naldo_S1K 15 дней назад
@@Charger-ob8yl lol. Yeah that comment made ZERO sense!
@ashofficial790
@ashofficial790 15 дней назад
@@Naldo_S1K what didnt make sense to you?
@Charger-ob8yl
@Charger-ob8yl 15 дней назад
@@Naldo_S1K right. Lotta mfers don't turn wrenches and just repeat shi they read on a forum from 1992, out of context.
@s1krr_Greece
@s1krr_Greece 14 дней назад
You should try 16/41 and let us know 🫡🙏
Далее
This is why 1000cc riders HATE 600cc riders! 🤬
23:42
FULL BUILD - REBUILDING A CRASH DAMAGED BMW S1000RR
1:38:34
One More than Ten (Years)
37:02
Просмотров 194 тыс.
RUNNING LATE… BUT WITH AN S1000RR
19:19
Просмотров 51 тыс.
BMW S1000RR 🏍 Factory Building / Production Line
23:36
Brembo на Ладу Джетту
1:00
Просмотров 1,2 млн