Depending on which wideband you have you run the 0-5v wire to AN1 and then open Kpro and goto Parameters > Analog Inputs and click on Analog 1 and click on "Conversions" and select your wideband and make you name it wideband. Then click on the Closed Loop tab and select External Wideband and select the wideband you just created. Press upload and it should work. Depending on how you wired the wideband's ground you might have to adjust the voltage offset under "Analog Inputs" make sure you adjust in small increments like 0.01 or -0.01 and keep adjusting until the kpro matches what your wideband reads
i just got my ecu back after purchasing a kpro - it does not rev over 3k rpm its undrivable after installing it like it just doesnt go over 3k rpm at all while driving, i have intake, exhaust and headers, will this solve my problem?
Depends. Sometimes yes. Sometimes no. When you plug in you can download the map. There are times when you download the map but it’s corrupted because of software version differences.
Good info!!brother question, mine is a 05 type s rsx..with k24/20 swap..what a really need to get a kpro?do i need to find a 02/04 type s ecu or you guys have everything i need just plug and play?thanks
Here is what you need for a plug and play solution. Make sure you select yes to the jumper harness, that is what is going allow you to run a 2002-2004 ecu. kugantuning.com/products/hondata-kpro-v4-k-02-04-rsx-typs-s-prb-ecu