How to setup the Eachine E010S with a Spektrum DX6i, Binding and Cleanflight Config

Подписаться 17 тыс.

Просмотров 19 тыс.

50% 1

You can get one right now: bit.ly/E010S
Extra 45C E010 Batteries: bit.ly/45CMulti...
Check out my current giveaway: geni.us/DroneRa...
I’m a big fan of the Eachine E010S. I’ve done a number of videos with the FrSky version. But I bought one for my dad and since he has a DX6i I bought him the Spektrum version. I expected the manual to be good enough to set it up, and if not there should be a RU-vid video right? NOPE. The printed manual was for a FrSky. I couldn’t find a RU-vid video, so I decided to make one. In this video I go through all the steps needed to the get Spektrum version of the Eachine E010S flying with a Spektrum radio.
Supporting Droneracer101 on Patreon means more reviews and giveaways for you: www.patreon.com/droneracer101
To Get Started Get These:
Eachine E010S Camera Drone: bit.ly/E010S
Make sure you pick the receiver that matches your radio
and extra batteries
Extra 45C E010 Batteries: bit.ly/45CMulti...
If you need a radio get one of these:
Beginner Flysky Good Radio: bit.ly/FlyskyFSi6X
or
Expert FrSky GREAT Radio: bit.ly/TaranisX7
Get one of these googles:
Entry Level Budget Goggles: bit.ly/2eFsNaF
Eachine Upgrade Goggles with DVR and Diversity: bit.ly/ev800d (These are the best option)
Aomway Commander Goggles with DVR, Diversity and Headtracker: bit.ly/AomwayCo...
Subscribe and be a DroneRacer! : / @simracer101
Enjoy & remember to like and subscribe!
-- Find DroneRacer101 Online! --
Facebook: / droneracer101
Twitter: / droneracer101
Instagram: / droneracer101
-- Credits --
All titles and images created by DroneRacer101
“Droneracer101 is a participant in the Amazon Services LLC Associates Program and other affiliate programs, advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com and other sites at no addition cost to you.”
Thank you for supporting DroneRacer101 by using these links. Testing all this hardware is quite expensive.

Опубликовано:

20 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@SimRacer101 7 лет назад

You can get one right now: bit.ly/E010S Extra 45C E010 Batteries: bit.ly/45CMulticharger Check out my current giveaway: geni.us/DroneRacer101Rewards

@DroneOn 7 лет назад

Very helpful and informative.

@willpease5604 4 года назад

I'm just starting to get into the world of quads. I have a DX6I I use with my RC plane so this video was highly helpful. I'm looking to get into FPV so learning how to use the 6i on a quad is a strip in the right direction. It looks like I need that little quad now. Thanks so much! Any more with the 6I and a quad would be great!!

@anem8or 7 лет назад

Thank you for the video, just got the drone and this is the first time I've used cleanflight. Now it's time to bump into lots of things.

@zakmohti 6 лет назад

wonderful video to setup E010S. Got the quad but waiting on my Q7 to test. Thank you for your clear instructions.

@SimRacer101 6 лет назад

+Zak Mohti You are very welcome.

@MicroLosi 6 лет назад

Hey! I bought the 010s and started binding it. I cried and became ready to fire this fckng whoop. After that I did everything from this video. And now it works. I think Echine should pay you for the video.

@Tavdog 6 лет назад

Great job, thanks for info. Just used it for mine and about to test fly !

@odiemarilla6096 3 года назад

haha this is awesome tutorial for use on spektrum. thank you

@frankm8252 6 лет назад

Thank you so much for the video. A great help. It's obvious I need to upgrade my transmitter.

@gmeincoronato5807 3 года назад

Thanks for this helpful video! Just to make sure, can i follow the same procedure for a Eachine UZ65 (with DX6i)? Thanks in advance!

@t.s.k.8928 6 лет назад

nice video it helps me verry wel with ol my problems

@SimRacer101 6 лет назад

Glad to help!

@mpm3music334 6 лет назад

This video is a godsend.

@SimRacer101 6 лет назад

Very glad I could help.

@nero8068 4 года назад

I have a problem, I know this video is older, but in my rates, if I go to max on the stick at the dx6i, it doesnt go to max it only goes half way up, i dont know what i should do now

@Josh-e2l Год назад

Hey mate, would I be able to bind my dx6 with an eochine warbird mini p-51, or do I have to replace the reciever in the plane? Thanks

@irwinchee6260 6 лет назад

Wow thanks! I have a DX6 and am getting a tiny whoop. This vid helped me the most. Thank you! Would this work with a kingkong tiny 6 though?

@SimRacer101 6 лет назад

Yep. It will be pretty much the same.

@oznerol256 7 лет назад

So its pretty much the the exact same procedure as with FrSky and you just have to configure everything exactly as you have to do for every other brushed micro.

@SimRacer101 7 лет назад

+Oznerol256 no bind button like on the FrSky. And I have never had to reverse as servo or adjust the minimum throttle on any of my FrSky models.

@suicidekwad4468 6 лет назад

So the E010 is the frsky version and the E010s is the spektrum version?

@saschak2561 6 лет назад

Hello DroneRacer101, thank you very much for this Video. I have the same Setup (DX6i and Eachine E010S). I have one very big Problem. My DX6i does not connect to the E010S. I cant bind. Now I tried a lot of Things in the cleanflight but nothing works. Can you please give me your configurations? Ports: which Serial Rx port is active? UART3? Configuration: which receiver did you use? Serial-based receiver (speksat.....)? Which Serial Receiver Provider did you use? SPEKTRUM1024? Thank you very much for your help. Without your help my Q010S is trash :(

@supercharged3975 5 лет назад

Great vid

@Tavdog 6 лет назад

I've noticed that the throttle stick needs to be well past mid point to get this thing to hover (DX6i). I've had to bump of up the throttle midpoint and expo to get it to hover and fly at mid stick. Did you see this behavior as well ?

@SimRacer101 6 лет назад

+Tavis Gustafson Hmm, I don’t think so. It was my dad’s I setup for him so I don’t have it any more to test.

@Tavdog 6 лет назад

I fixed it by adjust the rxrange in betaflight cli. Before adjusting that my ranges were from around 1200 to 1800. This by the way is the other way of fixing the won't arm issue, instead of upping the low stick threshold, you adjust your rx ranges so that low throttle actually reaches close to 1000 level.

@k.c702 5 лет назад

Hello. I know this is an older video but i liked it. Thanks for posting it.I am totally new to drones and have the Boldclash B03 Pro as well as the B03. A friend who lives overseas sent me 2 transmitters that he is not using anymore. One is a Spektrum Dx6i and the other is a Flysky FS-i6. Do you know if the two quads I mentioned will bind with these transmitters or how to bind them? I haven't been able to find information on how to do it, or unless I missed the information. Any and all help would be greatly appreciated. Thank you so much for your time and any and all info you can provide. Keep up the great vids.

@SimRacer101 5 лет назад

So it depends. You need to know what receiver the models have. If they are not marked the easiest way to tell is probably to connect to Betaflight like in this video and look at the protocol on the configuration page.

@markvardy4964 7 лет назад

Awesome vid and very helpful,I noticed when you move yours by hand the props don't start up,on mine if I pick up my whoop then the props start,if I hold it still the stop,but if it's not level then on side will spin,also why not run Acro,I keep reading telling not to run anything other than Acro as you pick up to many bad habits.

@SimRacer101 7 лет назад

+mark vardy it sounds like air mode is active and motor stop is not enabled. I think it is important to know both modes. But indoors you often don't have the time to respond to things in rate mode. And the people I have heard interviewed that specialize in Tiny Whoops do the same.

@markvardy4964 7 лет назад

DroneRacer101 thank you for the reply,I'll watch the vid again and set mine up the same as yours,thanks for the info 👌🏼

@MattPallone 6 лет назад

THANK YOU

@fsk64 7 лет назад

Whats about the givaway?

@SimRacer101 7 лет назад

+francisco the frog will be announced in a video Saturday.

@codmanhaddock 6 лет назад

Would this work with e011?

@SimRacer101 6 лет назад

No. You will need one of these. iRange IRX4 Module | Control(almost)ALL your drone from your FrSky Taranis | How to setup the IRX4 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OW6VIoknEFU.html

@codmanhaddock 6 лет назад

DroneRacer101 thanks for the reply I'm new to this, would I need a new esc/receiver on the e011 or would the stock one bind?