HOW TO SILICONE A SHOWER TRAY - REPAIR SEALANT - Plumbing Tips

Подписаться 345 тыс.

Просмотров 903 тыс.

50% 1

This video will show you how use silicone sealant to seal your shower tray. We tell you how to remove old mouldy sealant and prepare the new surface for new sealant. We show you how to apply the new sealant and smooth the silicone out on the shower to get a great finish.
🚀 LEARN PLUMBING ONLINE IN MY STRUCTURED COURSE (50% Before March): www.learnplumbingonline.com
🛠 AMAZON TOOL STORE: www.amazon.co.uk/shop/plumberp...
🥾 10% Off my workboots + workwear Use Plumberparts10: www.bigboots.co.uk/discount/p...
👓 10% Off Safestyle Sunglasses Use PLUMBER10: safestyle.com.au/?ref=PLUMBER10
Learn Plumbing Online is perfect for future apprentices, homeowners who want to understand and tackle more plumbing jobs in the home, handymen who keep turning down the odd plumbing job and more. With practical follow along video lessons and discussion board you can boost your knowledge in my amazing trade. Sign up now: wwwlearnplumbingonline.com
**VISIT OUR SPONSORS**
www.traderadiators.com | www.stuart-turner.co.uk

Хобби

Опубликовано:

20 апр 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 248

@plumberparts 5 лет назад

*Links to the tools I use everyday here:* www.amazon.co.uk/shop/plumberparts Plus, follow my *Vlog “TimesWithJames”:* ru-vid.com

@rickybee4537 5 лет назад

Nice one, i always us the ole fairy mix. I guess this isn't recommended when using ct1 as it works in wet conditions?

@virginiatrigueros5487 2 года назад

@@rickybee4537 ¹

@NiecyRose 3 года назад

I’m here in an attempt to rescue my husband’s diy shower disaster yesterday. I wanted to cry this morning at the state of it and it’s taken me three hours to remove his efforts. Bless him, It looked like the dog did it, blindfolded.

@richardmillward3898 Год назад

Any chance you could come and do my shower? I think I’m about to challenge your husband for the best impression of a blindfolded dog

@John-hx7ju 6 месяцев назад

Come on, we can’t be good at everything!

@brownstuff1899 5 месяцев назад

This comment sounds like it was made by my wife😂😂😂

@olkaolka9092 4 месяца назад

😂😂😂😂

@amandawilson9555 2 месяца назад

😂

@Mister_H 9 лет назад

You make it look so easy, but have given me more confidence to have a go at a job I have been putting off for months. Thanks!

@plumberparts 9 лет назад

Mr H good luck!

@pmjohnson-me7mh 10 месяцев назад

This is the video I needed! Concise and precise and exactly the info I need. Thanks for sharing and extra thanks for keeping it quick and easy to understand.

@russcosports1520 3 года назад

Guy is an absolute legend. Brilliant video - straight to the point no messing around banging on endlessly and even a bit of humour and personality to go with it. Super channel !!! Subscribed instantly. Keep up the good work bro 👍🏼👌🏼

@danielbrewin6870 7 лет назад

Thanks for the tips! Just sealed my first shower. A little rough around the edges but happy as a first attempt! All the best

@saskiaton3603 5 лет назад

Thanks mate, I now feel more confident to silicone my shower tray. I removed old silicon using window scraper as you suggested. The tip to use the blue corner thing - genius! I have one of these lying about from my plastering jobs! Other golden tip was NOT using your finger tips as you immediately transfer bacteria onto the new silicon. Will definitely tune into your site for my next plumbing challenge. Cheers!

@eddiejohn7744 4 года назад

Thanks very much for the tips. Been putting this off for a year but today following your tips at last I have got all the old stuff out and cleaned it up ready for the silicone which I hope to do tomorrow . The clean edge tool looks a good idea so I purchased one. A tip for others a good newish paper scraper also slices through the old silicone and a screwdrier that fits nicely between the tile and the shower base is good for getting out bits that didnt come out with a pull.

@lindataylor6489 3 года назад

Thanks for this!! I've ordered the window scraper tool plus some square things to smooth the silicone. As soon as they arrive, I'm getting it done!! Thanks for the video and advice.

@martynbroughton1248 4 года назад

Terrific! Chatty and confident, makes you absolutely sure you could do it - almost - as well.

@Yonder792 3 года назад

Thanks for this so much, my job turned out great.The smoother was the best thing ever.

@adamkrzysztalowski8148 3 года назад

All that we need to know and use in a short straight to the point video. Thanks bro

@paulmorinart 5 лет назад

Thank you, James. I'll be attempting this job tomorrow.

@user-ud3yw9dw8j 6 лет назад

Great advice, really useful. Thanks!

@davidcox4662 2 года назад

Brilliant Video 👍👍 straight forward and easy to follow 👌👌👍👍

@Rosy___ 3 года назад

This is exactly what I needed to see, thanks!

@lovol2 10 месяцев назад

Ive finished the remove it part. Thanks for posting this vid.

@pacinoking2 2 года назад

Thanks! Great video. The best I've seen on this subject 👌🏻

@gregorynasrallah1755 6 лет назад

I've already finished most of the job last night, but not the silicone. Thought I remembered correctly, and I did according to you, but that finger causing problems with mold is a new one for me. Thanks from "Across the Pond".

@Ploggy. 4 года назад

Great video mate thanks for posting 👍👍👍

@Buzz231094 9 лет назад

This looks a lot better than spending an hour scraping at scabby old bits of silicone with a Stanley knife and blade :D I'll have to clean up my act next time I clean up a shower/bath. Thanks James, you the man

@plumberparts 9 лет назад

Buzz231094 No worries!

@martinuglow116 3 года назад

Thanks. I've been putting off redoing my shower. No excuses now.

@dashreplay8465 5 лет назад

Good job, it's work a try TODAY!!!

@danialdaud Год назад

at last, some useful info on this issue. Thanks for the video

@MrSilasgreenback 6 лет назад

Thank you for the advice.

@davidalp9644 7 лет назад

OMG Thank God I watched this!!! My shower has been leaking for 6 months (into the garage below) so I've not used it for six months, had to have baths instead.... But I spent all day cleaning and bleaching the shower today -- and tomorrow I was just gonna silicone over the old silicone!!! I didn't think to remove the old stuff! Thanks so much for the tip.

@plumberparts 7 лет назад

No worries Dave, how did it go? SUBSCRIBE! ➡️👉 ru-vid.com 👈⬅️if you haven't already!

@alastairking3613 2 года назад

Great tips. I am ready to have a go!!

@allysonbird8452 7 лет назад

Great video, will give it a go. Good to see a plumber not showing his "plumber's crack" lol. Many thanks.

@davidfisher9037 2 года назад

Next summer play Frilford Heath Golf Club it's an amazing place. Thanks for the silicone tip 👍👍

@gloriabellingham7914 2 года назад

Thank you foe demo.i can't believe i did it...bloody messy job...but proud to say i did a good job...no leaks so far 👍

@John-hx7ju 6 месяцев назад

Brilliant. Thank you 👍🏻

@silverback1540 6 лет назад

Thanks mate great help

@jamesclarke9149 2 года назад

Top man James, Top tips.

@samodonoghue2497 4 года назад

That really helped me out, thank you for sharing. (Super tip about bacteria! Now I know that I should have bought the little tool Amazon recommended, I thought they were just up-selling haha)

@margueritemiller6286 Год назад

Very good video. Thank you.

@TimB33 5 лет назад

Came for the sealant tips, stayed for the golf course reviews

@dennisbaker3979 6 лет назад

My first attempt at sealing and it is around a shower cubicle just my luck! Thanks for the instruction.

@zeberdee1972 3 года назад

Thanks for the tips , didn't have the nice silicone former so improvised and used an old gym pass card , just cut the corner off . Well it worked ......not saying it looked as professional as yours but , im happy with it :-) . Maybe might part take in a Peroni or Birra Moretti myself ....i think i earned it .

@bigalsbash 6 лет назад

Use the tool the opposite way first so the chamfer pushes silicone into the joints then use opposite way to finish off.

@stevehorn5484 6 лет назад

Great work thanks for the help

@plumberparts 6 лет назад

No worries dude! Glad to help you out!

@tadjones4448 8 лет назад

legend! just got my self a scraper and a pointing tool :D thanks

@plumberparts 7 лет назад

No worries!

@catherineleedham5453 7 лет назад

Hi - thankyou a very helpful video. Just wondered with Dow Corning sealant you used - is it 785. Many thanks

@paulbrooks2539 2 года назад

Thanks great advice, especially the bit about not using your finger

@johndillon942 10 месяцев назад

You’re the man

@user-ud3yw9dw8j 3 года назад

cheers - James brilliant vid as usual. What sealant did you use?

@TrueDJ 5 лет назад

@plumberparts What brand of silocone sealeant do you recommend these days, so many options, thanks

@donb3557 3 года назад

Nice one James! Do a video on how I can avoid tradesmen from hell😂 I either get messrs bodgit and run or John Wayne and the cast from the Alamo which is why I am doing this stuff myself, wrong side of 60 with one hip replacement done and another one lined up for when covid19 has run its course! The sites that say they vet tradesman are an absolute joke by the way, I reckon their mum and dad write the reviews for most of them. More power to your elbow old son love the no nonsense videos they are bang on and also entertaining keep em coming.

@jackjones429 8 лет назад

I'm getting one of them silicone formers. Much easier than using my finger and leaves a much better finishes. Cheers matey :)

@plumberparts 8 лет назад

+Jack Jones They are great! PP!

@TrustPlumbing 9 лет назад

I've never tried the spreaders, use masking tape but watching this I may have missed a trick here, cheers mate.

@davidstapley7203 7 лет назад

Good video, good tips thanks, not sure about the golf tips !! Definately going to get the silicone profiler.

@plumberparts 7 лет назад

No worries Dave, glad to help you out fella. GOLF FOR THE WIN! SUBSCRIBE! ➡️👉 ru-vid.com 👈⬅️ IF YOU HAVEN'T ALREADY! 😎

@inceweb 7 лет назад

The new Cramer Fugi profiler kit has clip-on plastic rails which bridge the grout lines, so you don't leave little dents in the silicone where they cross.

@Vini-Pizza 4 года назад

What is the name of the little square blue square you used to smooth the silicone bead?

@jansmith2200 2 года назад

Thanks for the advice. Please can you list the tools used? Many thanks.

@toriad9242 3 года назад

Been looking for a good video to show me how to do this thank you. I have a similar shower try to the one in the video with a dip in it where we stand :-( its on a riser kit any videos or advice how I can support / resolve it.

@adpeace2181 2 года назад

Nifty, thank you 👍😊

@chloecahir9503 7 лет назад

how do you suggest doing corners. clean finish with the silicone tool but the corners i find can look a bit dodgy if i dont go over it twice. tips?... great quick video thanks!

@tlangdon12 9 лет назад

The new Fugi V set has a guide that helps the profile move neatly over grout lines. I've not tried it yet though to know if it really works - I've only just ordered the set.

@eddiejohn7744 4 года назад

Live and learn , another valuable tip. When removing excess silicone from the edging tool with toilet paper make sure you put the messy paper into a container or a plastic bag. Dont put it on the floor of the shower tray whilst you carry on working. If you have a small putty knife ( looks like a small paper scraper ) you can use that to take off most of the excess silicone on the edging tool and use it to fill in the gap further along the shower tray.

@mcfcjoe10 Год назад

😂

@handyguyhints1992 9 лет назад

Alright PP!! I have considered in the past having a t-shirt made which says "silicon sealing does not scare me" but to be truthful it still brings me out in a sweat so maybe not just yet.... Window scraper with Irwin blade all the way for me, though not seen that retracting version before. Smooth. Then bit of chemical remover if needed, then meths (mostly for cleaning...) then new stuff. Formers much better than finger as gives good decent sized cross section. Take it easy!

@plumberparts 9 лет назад

HandyGuyHints CheersHandy Guy! Those formers are the dog's!

@craigallan4322 9 лет назад

Hi useful vid. What sealant did you use in the shower? Cheers

@mikeyram3979 7 месяцев назад

Hi what silicone do you recommend for shower base please thanks

@fedup3449 3 года назад

I've found that if you spray the low flat seal beads (where water sits) every year with white wine vinegar and water (60/40) it never goes mouldy. Thanks for the tip on the plastic disk. Gonna make one. I was always using a wet finger and always got in a reeet mess.

@ruthmalkowski6089 4 года назад

Can you use the same process for around the outside of shower and around toilet base?

@krishawes 4 месяца назад

I need a silicone profiling tool in my life

@Natta44 Год назад

Just moved house and the shower tray silicon is atrocious. All messy, blobby and black mould growing in it. Can't wait to do a nice smooth finish! 😊 Thanks!

@blackbeautifulandsmart2849 5 лет назад

I've read that you should use methylated spirit to clean the area after removing the old silicone and before applying the new silicone is that correct?

@cashinondt8431 Год назад

Thank you

@DavidTaylor-sz2ec Год назад

What should I be searching under to find a 10mm profile that you used to smooth the sealant in this video. Many thanks

@8loveutube 5 лет назад

You are great!!

@or1057 2 года назад

Nice I need to buy them little blue guitar pick type things 🙏🏾

@stanssoapbox 6 лет назад

Good tips. I already tried sealing without removing the old silicant. Didn't work. Waste of time and money. This time I have removed the old silicant but not scraped away the excess. Now I'm off to B&Q for a window scraper and one of those smoothing tools you used. I would have used my finger and made a right mess. By the way, I don't mind the banter. Because most of it was at the end. I could enjoy it knowing that I didn't have a hundred more videos to sit through because this one had answered my questions. Mind you I have to admit that at the beginning even the word "hello, I'm John" had me saying to myself "I don't need your name or an introduction to the video, I might have tons more to watch yet'.

@gangaberystwyth2599 3 года назад

Fab, thanks.

@pocraquay 9 лет назад

Yo PP what did you use to clean the black from the old sillicone?? Ta!

@tebigman65 5 лет назад

VERY GOOD ADVICE......

@plumberparts 5 лет назад

Thanks Tom!

@jamesbarber8241 2 месяца назад

Good video @plumberparts BUT I found that there is a 4mm ish gap between tray and tile, full of silicone. I'm led to believe you shouldn't silicone on top of old silicone.. but digging it out of this gap is hell.. help!

@turkeyphant 2 года назад

What's the best method for sealing larger gaps between the tray and the wall?

@MyAlanwhite 6 лет назад

I'm going to install a new shower tray and enclosure this weekend. I'm using a fugi 5 kit for the silicone. What size do people recommend a use on the fugi blade for the shower tray ,6,8,10,16? Also the same question for silicone the shower enclosure panels?

@robhay23 5 лет назад

hey, I need some help. I sealed my shower tray a few weeks ago, I let it set for 24hrs before using it but I has broken away again! any advise?

@sheilaclifford-smith1458 2 года назад

what do I use to clean away the black stuff with, please? before applying silicone? thanks

@fightermma 3 года назад

Can you use wulti tool to remove silicone?

@justjacqueline2004 9 лет назад

My most important tool is my plumber,what a sweetie!

@plumberparts 9 лет назад

Maria das Santos Aww ain't that lovely!!!

@apartmentontheplaza7369 4 года назад

I did my shower tray week and did a neat job, but have noticed it’s leaking I checked the tube and it’s dowsil 796 the stuff for windows & doors would this be the reason even if it’s got no gaps and it still looks tidy?

@sunkat76 4 года назад

Thank you. Please would you do a video on sealing a bath tub. I have been told you have to fill it full with water to eight it before sealnt is applied. Is this true?

@superseven220 3 года назад

Yes fill it at lady half full and leave for at least 24 hours before letting the water out

@Pkdimmock 2 года назад

So you don't spray any water on before you start to smooth out the bead?

@acestu 4 года назад

OMG Simon Le Bon Moonlighting !

@Xxkelseycragg09xX 4 года назад

for everyone asking, it looks to me like hes used dowsil 785 white bacteria resistant, good stuff i find its the only one that lasts without molding again quickly. you can buy this from mosy diy stores, screwfix b&q ect

@darrenevans1572 4 года назад

Do you wet the silicon before profiling?

@nigelshawable 8 лет назад

Would you seal the tray and the verticals at the same time? if so how do you stop the Fugi smudging the other bead...? Or is it best to allow one to dry and then apply? Or will this join be an area where issues may develop in the future?The Fugi kits come with little wedges to stop grout lines messing with the seal profile - Should these be used or does this create a place for water to gather..As you can probably tell I'm going out of my mind here....Sort me out with a professional view.

@coleyboy83 9 лет назад

I am ashamed to say I use a wet finger.. I've done this for years and was taught it also when I was an apprentice. I never knew those formers existed until watching your videos. Next on my shopping list.

@plumberparts 9 лет назад

James Cole No worries James, good luck in the future!

@jasons6651 7 лет назад

What a great video. You wouldnt believe the agro ive had in the past trying to silicone. One profiler getting bought. Cheers

@brokenscart7989 7 месяцев назад

Wouldn’t you need to remove the shower door, as the tray should be sealed against the wall behind the frame, right?

@petersplumbing29 8 лет назад

Stanley blade scraper is the muts nuts

@janinepatching7626 4 года назад

Hi we have a leak in the corner of our new shower. The plumber said she would remove the old silicone and redo it. He removed part of it in the corner then went over the old and put the new in the corner. I'm not happy,is this ok?he also didnt clean it, so dirt is now stuck under the new clear silicone?

@MediaEasier 5 лет назад

what silicone do you use buddy?

@qwerty15990 9 лет назад

Hi where did you buy your multi master tool from? I saw it on one of your videos installing a toilet.. Be great if you get back to me thanks

@plumberparts 9 лет назад

Rickardo Napoli I think I got mine from Screwfix...

@livv1255 7 месяцев назад

10/10

@LakesLee 3 года назад

Do the silicone formers work well on rough stone effect tiles, wondering about getting one 🤔 great vids fella

@kickenchicken9645 3 года назад

LakesLee, silicone former's follow the conjecture of whatever its riding against. if surface is really rough on 1 or both sides of the crack its hard to use this tool & get a good seal on either side of the caulk, try taping off the smooth side if u have 1 & put in as little caulking as possible & strike with finger both ways to work it tight in the rough surface. you can apply a little more then if needed. remove tape carefully while still wet. hope this helps.

@LakesLee 3 года назад

@@kickenchicken9645 yeah that's what I usually do, tape both sides then wipe with finger, then wipe each time I remove a tape. 👍🏻

@terrywatson2722 3 года назад

Had low level shower tray fitted basin was teed into it only has 1and a half metres from soil stack but water comes over the top plumber not answering his phone only been in 6month help

@luap1983 3 года назад

Doing this with black and it’s going everywhere any tips on using black silicon?

@caskwith 8 лет назад

What do you think to a quick spray of washing up liquid and water before using the forming tool. I have always done it and find it makes the clean up easier with less of the thin film either side of the joint, some people though say you shouldn't do this. Any thoughts?

@plumberparts 8 лет назад

+caskwith I've done it many times and never had a problem! Sub here>> ru-vid.com

@caskwith 8 лет назад

+plumberparts Good to know! Thanks.

@ReadandWite 9 лет назад

A few links to the small tools that YOU use would be useful. Enjoy your videos immensely and HOLD TIGHT !

@plumberparts 9 лет назад

ReadandWite Ok, we'll get on it!

@youtubeaddict5663 8 лет назад

+plumberparts Agreed! Im having to do it myself (so I can save a penny or two) - would be great if you could include the links to your tools! (Or just respond here)