HOW TO SPRAY PAINT YOUR PLASTIC ENGINE COVER (BMW E90)

Подписаться 18 тыс.

Просмотров 45 тыс.

50% 1

In this video I provide a guide to how you can paint your plastic engine cover pieces. I based this guide from a forum post I found online, in which ended up working just fine for my cover piece. The process I present in this video is specific to my engine cover, which is off a BMW from the E90 generation, but this process can be altered if you want to paint a cover from different make or model. You can use this process as a general guideline to help you get ideas on how to paint your cover. Hope you guys in enjoy!
Forum Post www.e90post.com/forums/showth...
Supplies:
Lime Green Engine Enamel www.jegs.com/i/Duplicolor/318...
Adhesion Promoter www.jegs.com/i/Duplicolor/318...
Metalcast Ground Coat www.jegs.com/i/Duplicolor/318...
Clear Gloss Engine Enamel www.jegs.com/i/Duplicolor/318...
Detail knife amzn.to/3bnzqKA
Painters Tape amzn.to/3bjs8aJ
400 Grit Sand Paper amzn.to/3ez3gxW
MODS LINKS
Performance Mods
AFE Intake www.anrdoezrs.net/links/10023...
BMS Pedal Tuner burgertuning.com/products/bms...
Actice Autowerke Tune www.anrdoezrs.net/links/10023...
Exterior Mods
M-Sport Front Bumper modbargains.com/m-sport-mtech...
M-Sport Rear Bumper modbargains.com/mtech-msport-...
Carbon Fiber Splitters www.ebay.com/itm/Carbon-Fiber...
Gloss Black Grill amzn.to/3iQ4lUH
Front Lip www.ebay.com/itm/Fits-06-13-E...
Air Intake Scoops www.anrdoezrs.net/links/10023...
Rear Extensions bwecustoms.bigcartel.com/prod...
Carbon Fiber Spoiler www.inlinesixauto.com/product...
Side Skirt Extensions www.ebay.com/itm/Carbon-Fiber...
Front Asanti Wheels www.anrdoezrs.net/links/10023...
Rear Asanti Wheels www.anrdoezrs.net/links/10023...
BC Racing Coilovers www.anrdoezrs.net/links/10023...
Instagram / e90hallenb
NOTE: Some links may be affiliate links, which means I'll earn a small commission if you make a purchase though the posted link. This'll help expand this newly started channel!

Авто/Мото

Опубликовано:

17 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@austinlohmer9506 3 года назад

I just did this today, and I gotta say, the hardest part was applying the painter tape.

@jbrown7403 4 года назад

Really great detailed step-by-step video that is extremely helpful! I’ve been toying with the idea of doing my F82 engine cover but the videos that I’ve seen have been sloppy looking and uninspiring. You’ve re-inspired me, Peyton!

@InlineSixAuto 4 года назад

I’m glad I could help! I appreciate the positive feedback. Thank you 🙌

@m3jazz 3 года назад

definitely a helpful video. exactly the color I am looking to do.Great work!

@decyrus 4 года назад

Great videos!!! I really hope to see more soon. I definitely subscribed

@trentkeyes9109 4 года назад

Great video man, I really hope your channel takes off 👍

@rahovestl298 Год назад

The best video showing your work step by step keep up the good work

@basmatic_rice 3 года назад

Thinking about doing this on my F82, thanks for the DIY, it looks great!

@rollinoutsidetv2892 2 года назад

Mines came out beautiful I watched ur vid & my burnt copper looks awesome. Both pieces

@eiki104 3 года назад

It turned out amazing 👍🏻

@DBaddis 4 года назад

Came out good, thinking about doing mines now

@big-patria-lo3508 3 года назад

Amazing results 👍🏽

@thinbluelinemustang372 2 года назад

Thank you! Looks incredible!

@tweedjohnny8740 Год назад

You have a lot talent, absolutely amazing.

@caseycole6667 4 года назад

AWESOME . looks great

@pignapoke6772 11 месяцев назад

This was great! Ive been wanting to do this but honestly … always bigger fish to fry… looks like a fun project for a quiet weekend

@erniearambula3525 2 года назад

Nice look gives engine bay detail, thanks for info I'm gonna do my E39 engine bay in Alpine White same as car.

@maxpotts1223 5 месяцев назад

Very nice job mate looks great on the car

@kapilapatikiriachchige5169 3 года назад

Very nice job.

@CSOTV 3 года назад

Hello Hallen, awesome video, great result, small suggestion: next time pull the masking tape off the stripes before the clear coat. Great 👍👌 job!!!

@Magicstockton 2 года назад

Interesting color choice but great job bro.

@josearevalo569 4 года назад

Forgot to clear coat the stripes to seal the paint 🎨 looks good tho

@aldina3714 4 года назад

I am doing mine soon

@mnafisrusly7913 3 года назад

Can i do the same to the battery cover only?

@TheMgd2929 2 года назад

Do u have to use heat paint on the cover, they really don't get to hot?

@rollinoutsidetv2892 3 года назад

👏🏾👏🏾👏🏾👏🏾👏🏾 I’m going to do mines after watching this I was going to pay someone but nahhhh I’ll do mines 🤜🏾🤛🏾💙 #bimmerlife

@samp4848 4 года назад

I like the way you can see the green through the grill , but is that the plastic air in take pieces behind the Kidney grills you sprayed also ? ?

@InlineSixAuto 4 года назад

The only I think painted green were the intake scoops. And the engine covers.

@samp4848 4 года назад

@@InlineSixAuto thank you so much for getting back to me , in your video @24:11 mins , what are they that you see through the grill . I have a e90 blue, and I'm going to do the same but match my paint colour. Great video. Very very good tutorial.

@InlineSixAuto 4 года назад

The two green pieces behind the grills are aFe intake scoops that I painted green. They’re linked in the description if you want to check them out 👍

@dlover97 3 месяца назад

What brand of materials did you use

@yogiidon9569 Год назад

🔥🔥🔥🐐

@christianalvarez2363 3 года назад

Did you use the metalcast as a primer basically, after the adhesion promoter?

@InlineSixAuto 3 года назад

Yes basically

@bryanconchi 4 года назад

Do you press at the same time you do the swipe motion?

@InlineSixAuto 4 года назад

What do you mean by press?

@connercrouse3826 3 года назад

Hi im just looking for advise i sprayed my plastic engine cover with regular krylon paint without even thinking of high temp can this be dangerous ??

@BellFamilyCreations 3 года назад

I just did mine today with krylon paint so I haven't got to see how it will hold up with the heat but from what I read the plastic melts at around 220° so if the cover can hold up to the heat then it should be fine. I only used it because they didn't have the high heat paint color I wanted. I didn't even use any adhesive promoter

@qwantez1973 3 года назад

Quality

@georgesf2763 3 года назад

Do you recommend the same way for the rims?

@InlineSixAuto 3 года назад

It could also work for wheels most likely. I’m not sure how it would hold up thought since wheels are exposed to a lot more road debris.

@JPVisuals 3 года назад

Does yours crack and peel? Mine started cracking

@InlineSixAuto 3 года назад

Mine hasn’t started cracking or peeling. I only have a couple tiny scratches where the paint peeled because I accidentally grazed it with a somewhat sharp edge object.

@maddymartinez231 Год назад

So I want to do mines what are the cans of paint I need

@InlineSixAuto Год назад

I linked in the description

@razvanandreiparamon7762 2 года назад

I can see you’ve got quite a bit of orange peel, have you tried wet sanding the cover?

@hoffmanscarab2010 3 года назад

Any update on how it’s holding up?

@InlineSixAuto 3 года назад

Still holding up just fine. Still looks like it did a year ago when initially painted it. Its not peeling off or anything.

@eastcoastshenaniganz9854 2 года назад

Song is fire, what is it?

@PsalmMiracle 2 года назад

Very nice car, but what’s with having a black and burgundy car then all the sudden lime green?

@InlineSixAuto 2 года назад

Thanks. It’s my favorite color so I wanted to put in on the car somewhere. And my air scoops are lime green so I thought it fit well together

@mariomedrano4803 4 года назад

How do take the smaller piece out ?

@InlineSixAuto 4 года назад

Just pull straight upwards on it. It’s not bolted in to anything. It’s held on by these two rubber holes

@mariomedrano4803 4 года назад

@@InlineSixAuto thank you bro . I really appreciate you replying to my email.

@amcascioli86 3 года назад

if you would have pulled the tape before you sprayed your clear coat everything would have been clear coated plus you would not have had such a build-up..just a suggestion--nice job

@matthewweisdorfer7757 2 года назад

Can you link the exact paint you bought?

@InlineSixAuto 2 года назад

Its linked in the description

@avivmizrachi4382 4 года назад

Very good but a few tips for viewers to make this even better and no "orange peel texture from 21:30 onward: all coats of paint need to be literally sweeping, meaning ALL THE WAY LEFT, THEN ALL THE WAY RIGHT starting and stopping beyond the part. Light coat means do this quickly, medium coat means slower, but still, full sweep across, not jumping around more or less. Its not more sprays or less sprays putting more paint on more areas., its covering the entire part with one sweep, and by going faster or slower means there will be more or less paint hitting that part of the surface. Also: some places you were too close hitting sprays that build up more in some areas instead holding another 6 inches back and steady sweeps. Also: clear coat needs to be applied either within about a half hour or after about 1 full day, so if you have orange peel, let it dry completely, wet sand with fine grit, then repaint. THEN clearcoat within the hour. This adds another day to dry for repairing the orange peel, but the results are perfect and worth all the hard work and prep. Tip: practice painting on a similar object first, to get your control of the proper distance and mist thickness, and sweeping timing, its worth it and will look professional 👌

@InlineSixAuto 4 года назад

Thanks for pointing out additional tips!

@Magicstockton 2 года назад

🏆

@mateocar5779 2 года назад

how do I take the cover off?

@InlineSixAuto 2 года назад

It’s held on by 3 allen screws, I can’t remember what size allen though. Two are in the front of the cover and third one is underneath all the covering towards the back of the engine bay.

@mateocar5779 2 года назад

@@InlineSixAuto I’ve gotten that far, but I can’t reach to the third one. I started taking off the filters on top, but it seemed like a mess and that there was an easier way to do it

@InlineSixAuto 2 года назад

@@mateocar5779 you have to take all that stuff off to get to it

@joshuamirote6505 3 года назад

Did you use high temp spray paint?

@InlineSixAuto 3 года назад

Yep. I linked all the paint I used in the description

@minhgia6478 4 года назад

you use plain paint or heat resistant paint.

@InlineSixAuto 4 года назад

I used heat resistant engine paint

@minhgia6478 4 года назад

@@InlineSixAuto Thank you, I'm going to use regular samurai spray to paint but I'm afraid I can't stand it so I ask you.

@InlineSixAuto 4 года назад

You’re going to want to use some heat resistant paint if you want it to last.

@minhgia6478 4 года назад

@@InlineSixAuto Thank you very much

@djformi Год назад

16:05 to skip the stripes

@robertbrown4262 3 года назад

Weren't all of these pieces all ready silver to start with.

@InlineSixAuto 3 года назад

Yeah but but parts of them had chipped or peeled off.

@emanuelwatches1226 2 года назад

wow he said lightly sand. & scrubbed tf outta mine 😂

@splintercell323 3 года назад

21:57 Continuity Error: He removes the painter's tape from the larger piece, but in the next shot the tape is back on the stripes.

@emanuelwatches1226 2 года назад

video placement in editing

@mariomedranopresident3626 3 года назад

Check out this DIY thanks bro

@yayo4478 3 года назад

Your last coats with clear coat were too light thats why it came out orange peely.. gott make the coats wet

@sponpantss 10 месяцев назад

He’s spray painting in the house in a dining room table. I would be so mad at my Husband.

@InlineSixAuto 10 месяцев назад

It was done in a garage

@Osamabeenleanin210 Год назад

Just go carbon fiber😎

@allanknight843 3 года назад

Please don’t talk so soft. Please put some bass in your voice. I don’t mean to sound offensive, your work is awesome. It’s just hard to listen to you talk

@InlineSixAuto 3 года назад

Noted LOL