How to spray sealer and why? 

Thanks brother !!

Haha thanks man! I appreciate it !

That's awesome!!! I have a special deal on my paint suits for a box of 20 for shops! Lets me know if you are interested!

What you recommend?

Awesome to hear that!!!

+W Matt thank you!!

Thank you so much!!!!!👍🥰

Awesome!!

+Double R Restorations awesome!

Thank you!

Give it a go you might have to move slower but might get smoother finish

Thanks you!

+Steve Janka doesn't matter you can out whatever you want on it 😊

+Ramcharran Khoon Khoon my pleasure!!

If the company says it and will back it up then run with it!

+Gilbert patino thanks so much man wow!!

I don't think you should do that. I would just use it as primer and sanded smooth no need for sealer 800grit should be good 🤙🏼

Yes trigger all the way down

Thank you!!!

Yes sir

600 if you are going to seal it and you should

+MrFireman164 haha 😊

In my opinion the cleaner the better

Thank youuuu!!

+Nperez1986 I would suggest over reducing the sealer it will make it thinner. That is one option. You could paint it and then flow coat it if you want

Awesome, thanks for the uber fast response! It's my first full car paint job and I've been prepping for months now to make sure I have everything I need before I commence

+Nperez1986 awesome man ! I'm going to give you some advice. You will screw up eventually and that will not be the last time so don't let it ruin your day . Fix it and move on !

Thanks for the advice, I plan to learn as I mess up :)

+Sean Pair I have not used the dt reducers my friend so I wouldn't be able to tell you. I do like the ECS a lot specially the slower ones

+Sean Pair the only one I use it the one for sealer which is D8764

Use lower psi. On your gun, turn the material knob down. Narrow the fan, then LIGHTLY feather it into corrected areas. Works 100%💯👍

+algernumv I ask my distributors thanks man ,🤓🙂

+RAVE DAVE Nono not with ppg with axalta you can

+marshallpulham 😀😀

mine fell off to.screw disappeared.

+Cel P yeah only one coat

+Michael Bullock honestly that's what was brought here when we switched haha and since I didn't know anything about ppg I didn't know there was anything else haha I'm going to ask about it, thanks man!!

it totally matters

you need a better base gun you are using a moped for base and a ferrari for clear

I have to say I don't know the answer to that question 😣

I do the same

garrett stokes for sure man, then theres no way the color can be off lol. I paint everything i csn off the car unless its a tricoat etc just to be safe. Which ive done tons of them off the car too lol. Keep up the hard work guys our industry is dying !

+brandon proctor yup that's a very good thing to do!!!

MOTIVATED PAINTERS do you guys get a flat rate there or is it hourly? Here in detroit michigan i get a 17 flat rate commision, just curious what it is world wide!

brandon proctor flat rate here in st. George Utah

Hahhaa Thanks !! To be safe yes

600-800 either or but more 800. Also I don't sand the sealer unless I have to

thank you for sharing your experience and also your advice; much appreciated,thanks PATRICK.P

Thank you!!!

+Steven VanVliet I sprayed at 75 just try moving a bit faster

No idea brother not tmsure if that's a thing

+andrew c it's sanded with 600. Inside the jamb PPG doesn't require to sand I know it was shocking to me when they told me haha

MOTIVATED PAINTERS thanks buddy. 👍

Depending on the Sealer you use, its not necessary to sand. It adheres very well. Although a light scuff with a scotch brite to check for imperfections is always good. Not sure why guys oversand and sand through all over the place, makes me crazy.

🙌🏼🙌🏼🙌🏼🙌🏼

It's 3:1:1 here is the link ca.ppgrefinish.com/getdoc/89f065d5-fbb9-452c-843a-565e47ad1d5b/Envirobase-High-Performance.aspx ECS61A-Chromatic Sealer - White

Basically but thinner

1.3 for sealers 1.5 for primer s

Nope if there is any big jobs I'll knock them down with some 800 but I don't isual sand sealer

I would still sand the e-coat just to be sure you get good adhesion.

+Val yeah that's true. But have you seen some factory primer primer jobs? Barffff

+Matt Calay different shades of white grey black

If I apply sealer yes

What you need to know is that sealer won't fix anything if there is peeling paint or stone chips or anything like that you need to fix them before you paint the car you can primer the whole car so in order to fix all the chips and stuff. That gun will do fine for Sealer base and clear

Many many thanks Gabriel. May god bless you. Thanks for your prompt response. Best wishes for your business.

+Robert Copeland I'm trying my best to get better quality ones 😊😊😊

+Robert Copeland keep am eye out!!!

Sealer is like primer I have never seen clear cost sealer

White of g5

+Jason Goldie thanks so much man!!! I will give it my best!

Sealer is like primer but thinner and you can apply color without sanding. No you cannot out color on top of CLEAR

WoW I'm honored man ! Thank you !!!!!

If the work is light yes

1.3 para mi

Gabriel saludos , cuando vas hacer un video en español para esa gente que quiere aprender lo qué haces y solo hablan español...

You can't get it unless from a distributor we get it from finish master

@@MOTIVATEDPAINTERS Any other primer/sealer you recommend?

I haven't used any other ones to recommend

Yuuuppppp hahahahahahahahah

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hOqTd2VUkL8.html

an expert painter can do ok with a cheap gun not a beginner get an flg5 at least you will get much better paint ideal for diy guys and I always use sealer cheaper than the extra paint you have to get without it

@@les1ed yes I didn't use sealer on the car this time though.

Technically yes but if it's tiny I just seal it I have never had issues

@@MOTIVATEDPAINTERS iv always sealed them to but recently heard everyone’s throwing etch over I worry that etch might come threw and affect my sealer or base coat

@DrivewayAutoBody I did jambs a few days ago and just let etcher flash before base coat knock on wood but no issues yet!

If you primer you don't need to seal. But in new parts you can just seal and paint

+Norbert H I haven't tried a sagola enough to say. My favorite guns right now are Matco MTHVLP14 for base with tekna basecoat. For clear iwata ws400 14HD

I have the WS400 but with 1,5HD never try it yet, you think it is OK for clear or to big? Sata 1,3 is bigger than the 1,5 iwata, what is your opinion?

+Norbert H 15hd I have heard good things about it!!! Try it out just move faster

Depends on the product your spraying- for example HVLP does not work well with some base coats. (low Transfer) HVLP work well with "Coat Flash" type Base Coats cause they apply lighter and flash between coats quicker. They also help to control mottle and normally blend well. Some base coats are difficult to blend with RP guns. I use Sata 1.2 or DV 1.3 or base. DV wide open throttle, Sata turned in 1 1/2 turns cause it can be a hoser. I find Iwata is real nice for clear, you go rock with it also. With Clear, pick up your arm speed, 75% overlap at 38psi with the Iwata, its nice to layer it on as well. if your not happy then apply a quick lighter coat to melt it down a little flatter, In other words, get into a groove, sing a song in your head, don’t move away until your happy with what you see then continue on.. 1-1/2 - 2 turns in from full throttel. We rush at times, try to relax and enjoy applying the clear, watch every pass. Having your gun to far back (distance) with lead to texture as well. Best thing to do is to practise when spraying bumpers..Focus on Air Pressure, Distance from panel and arm speed! Each clear likes a certain set up and technic, once you find the right mixture, you will be impressed on a regular basis. In my humble opinion.